Industrial Fiber Optic Components, Cabling and

Industrial Fiber Optic Components, Cabling and
Your Imagination. Our Innovation.
Industrial Fiber Optic Components,
Cabling and Accessories
Selection Guide
Fiber Optic Components for Industrial,
Automation, Power Generation/
Distribution, Transportation, Gaming and
Medical Applications
Avago Technologies is the world’s leading provider of fiber optic transmitters, receivers, and
transceivers. Avago offers unmatched quality with high-volume, cost-effective manufacturing
techniques. Industry leaders and small firms alike turn to Avago for their fiber optic needs.
The SFH-series (Connectorless) has 650nm fiber-optic components with the capability to work
with unconnectorized POF (plastic optical fiber) for ease of installation. The Versatile Link Package
contains 650nm discrete components that feature snap-in connector parts. The SMA/ST Package
is an extremely robust industrial-grade family with SMA or ST ports suitable for use in Fieldbus
applications. The Miniature Link family which provides greater link-lengths, is available with 820nm
and 1300nm technology. These are discrete components that can use SMA, ST, SC, or FC connectors.
2
Fundamentals of Digital Fiber Optic Links
Optical transmitters from these families include an LED. Transmitters are available with and without
driver circuitry. Cost effective driver ICs are available from many suppliers, and we offer application
notes that will demonstrate easy integration of these ICs into a transmitter circuit.
The optical receivers from DC up to 50 MBd include a photodiode, preamp, and quantizer circuit
(shown in the block diagram below). These receivers have TTL outputs (dc coupled) and can be used
with arbitrary timing (no duty factor restriction). Typical applications are RS232, RS485, SERCOS,
INTERBUS-S and PROFIBUS protocols.
Typical link block diagram from DC to 50 MBd.
Transmitter
Transmitter
Parallel
Parallel
Serial
Serial
Receiver
Receiver
Parallel
Parallel
LED
LED
Driver
Driver
Quantizer
Quantizer
Serial
Serial
Typical link block diagram from 1 MBd to 160 MBd.
Transmitter
Transmitter
Parallel
Parallel
Serial
Serial
LED
LED
Driver
Driver
Receiver
Receiver
Parallel
Parallel
Quantizer
Quantizer
Serial
Serial
The receivers for data rates from 1 MBd to 160 MBd include a photodiode, pre-amp and analog
outputs. They have to be ac coupled to a comparator or quantizer circuitry to provide digital logic
levels (i.e. ECL, TTL). The ac coupling requires encoding of the serial data (i.e. Manchester, 4B/5B,
scrambled coding), but provide better sensitivity than DC coupled receivers.
Plastic Optical Fiber (POF) Components
Avago Technologies is committed to the advancement of fiber optics technologies and recognizes
the importance of optical data transmission for today’s growing data networking needs. Plastic Optic
Fiber (POF) enables low-cost, high voltage applications providing safe galvanic isolation with the
advantages of optical data transmission; suitable for automotive, industrial and consumer markets.
3
Industrial Fiber Optic Transceiver
Applications
Providing a comprehensive line of high-performance fiber optic
transceivers, Avago’s products reliably support a wide range of
industrial data networking standards and speeds.
• Factory automation at Fast Ethernet speeds
• Fast Ethernet networking
• IPTV connection high-speed gateway to set-top box
• Home networking
• Industrial applications
• Real Time Fast Ethernet networks
• Gigabit Ethernet over POF
Industrial Fiber Optic Transceiver
Connector Configuration
Data Rate
Reach
Fast Ethernet
(10/100 Mbps)
Sonet
(155Mbps)
2000m
SFF/MT-RJ
Fast Ethernet
(10/100 Mbps)
2000m
SFP/LC
Fast Ethernet
(10/100 Mbps)
Sonet
(155Mbps)
2000m
Fast Ethernet
(10/100 Mbps)
2000m
SFF/LC
1x9/SC
Fiber
Supply Voltage
Part Numbers
DMI
Evaluation Board
HFBR-5963LZ
HFBR-0562
AFBR-59E4APZ
HFBR-0572
Multi-mode
No
Multi-mode
3.3V
AFBR-5903AZ
HFBR-57E0APZ
Multi-mode
HFBR-0570
HFBR-57E5APZ
Multi-mode
Yes
AFBR-5803ATQZ
HFBR-0535
3.3V/5V
1x9/ST
Fast Ethernet
(10/100 Mbps)
2000m
Multi-mode
AFBR-5803ATQZ
Versatile Link
Fast Ethernet
(10/100 Mbps)
50m
POF
AFBR-5972Z
No
AFBR-0544Z
3.3V
SC-RJ
Profinet®
Transceiver with Bare Fiber Locking System
Fast Ethernet
(10/100 Mbps)
50/100m
Data Rate
Reach
125 MBd
60m (NA0.3)
250 MBd
40m
1 Gbps
50m
Multilevel Coded
4
POF/HCS®
Fiber
AFBR-5978Z
Supply Voltage
Part Numbers
AFBR-59F1Z
POF
3.3V
Yes
Monitor Output (MON)
Digital
AFBR-59F2Z
AFBR-59F3Z
AFBR-0978Z
Analog
650nm Industrial Fiber Optic Components
Applications
Components listed here are compatible with both plastic (1 mm
core diameter) and HCS® (hard clad silica) optical fibers. Plastic fiber
(1mm core diameter), often specified in cost-effective solutions will
see implementations in frequency conversion, power electronics
control and industrial fieldbuses. HCS is typically used for higher
data rates and link length. Connectorization schemes include
Connectorless, ST, SMA and Versatile Link.
• Factory automation
• Industrial networking and fieldbuses
• Audio visual links and datalinks, up to 160 Mbd
• High-voltage conversion
• IGBT, GTO, IGCT power electronics
• High-voltage isolation
•Gaming
• Human machine interfaces
Versatile Link Package/Connector
Connector Configuration
Data Rate
DC-40kBd
Transmitter
Receiver
Application
Notes
Evaluation
Board
5V
HFBR-1523Z
HFBR-2523Z
AN1035
5V
HFBR-1524Z
HFBR-2524Z
AN5374
45m
5V
HFBR-1522Z
HFBR-2522Z
45m
5V
HFBR-1522ETZ
HFBR-2522ETZ
20m
5V
DC-5MBd
20m
5V
50m
500m
3.3V/5V
AFBR-1629Z
AFBR-2521CZ
DC-10MBd
40m
200m
3.3V/5V
AFBR-1529Z
AFBR-2529Z
50m
120m
3.3V/5V
AFBR-1624Z
AFBR-2624Z
50m
120m
3.3V/5V
AFBR-1629Z
AFBR-2529Z
AFBR-0547Z
30m
100m
5V
HFBR-1527Z
HFBR-2526Z
HFBR-0527xZ
30m
100m
5V
HFBR-1527ETZ
HFBR-2526ETZ
50m
50m
5V
HFBR-1527Z
HFBR-2526Z
50m
50m
125MBd
160MBd
HFBR-1521Z
AN1035
HFBR-2521Z
HFBR-2521ETZ
AFBR-0546Z
AFBR-0548Z
AN1121
AN1123
AN1066
5V
HFBR-1527ETZ
HFBR-2526ETZ
HFBR-1533Z
HFBR-2533Z
AN1035
10m
5V
HFBR-1534Z
HFBR-2534Z
AN5374
45m
5V
HFBR-1532Z
HFBR-2532Z
AN1035
20m
5V
HFBR-1531Z
HFBR-2531Z
DC-5MBd
20m
5V
HFBR-1531ETZ
HFBR-2531ETZ
50m
500m
3.3V/5V
AFBR-1639Z
AFBR-2531CZ
125MBd
160MBd
30m
50m
100m
50m
5V
5V
HFBR-1537Z
HFBR-2536Z
DC-1MBd
DC-5MBd
DC-50MBd
45m
5V
HFBR-1542ETZ
HFBR-2542ETZ
20m
5V
HFBR-1541ETZ
HFBR-2541ETZ
20m
500m
3.3V/5V
AFBR-1649Z
AFBR-2541CZ
50m
120m
3.3V/5V
AFBR-1644Z
AFBR-2644Z
HFBR-0502Z
AN1035
5V
DC-1MBd
HFBR-0503Z
HFBR-0501Z
110m
DC-40kBd
Tilted
HCS®
Part Number
110m
DC-50MBd
Vertical
POF
Supply
Voltage
10m
DC-1MBd
Horizontal
Reach
HFBR-0503Z
HFBR-0502Z
HFBR-0501Z
AN1035
AN1066
AN1123
HFBR-0527xZ
HFBR-0502Z
AN1035
HFBR-0501Z
AFBR-0546Z
AFBR-0548Z
5
Fieldbus and Sercos (SMA/ST Connector)
Connector Configuration
Reach
Data Rate
DC-2MBd
SMA DC-10MBd
DC-16MBd
2MBd - 16MBd
ST
POF
HCS®
50m
400m
50m
300m
Supply Voltage
Part Numbers
Application
Notes
Transmitter
Receiver
5V
HFBR-1505CZ
HFBR-2505CZ
5V
HFBR-1505CFZ
HFBR-2505CFZ
20m
5V
HFBR-1602Z
HFBR-2602Z
20m
5V
HFBR-1604Z
HFBR-2602Z
40m
200m
5V
HFBR-1505AZ
HFBR-2505AZ
40m
100m
5V
HFBR-1505AFZ
HFBR-2505AFZ
45m
200m
5V
HFBR-1506AMZ
HFBR-2506AMZ
45m
100m
5V
HFBR-1506AFZ
HFBR-2506AFZ
3.3V/5V
HFBR-1506AFZ
HFBR-2555AFZ
45m
45m
100m
3.3V/5V
AFBR-1555ARZ
AFBR-2555ARZ
40m
200m
5V
HFBR-1515BZ
HFBR-2515BZ
40m
100m
5V
HFBR-1515BFZ
HFBR-2515BFZ
Evaluation Board
HFBR-0538Z
AN1080
AN5006
AN1080
HFBR-0540Z
HFBR-0541Z
HFBR-0539Z
DC-10MBd
Connectorless
Connector Configuration
Data Rate
Reach
POF
HCS®
Supply
Voltage
Part Numbers
Transmitter
Receiver
DC-5MBd
20m
5V
SFH757V
SFH551/1-1V
100MBd
20m
5V
SFH757V
SFH250V
DC-5MBd
20m
5V
SFH757
SFH551/1-1
100MBd
20m
5V
SFH757
SFH250
V-Housing
LL-Housing
Application
Notes
Evaluation
Board
AN5341
AN5342
AN5341
AN5342
High Galvanic Isolation Link
Connector Configuration
Data Rate
Creepage & Clearance
Distance
Supply
Voltage
Part Number
Application
Notes
Evaluation
Board
HFBR-3810Z
DC-10MBd
24.96mm
5V
AN5489
HFBR-3810MSZ
DC-5MBd
25mm
AFBR-390525RZ
50.4mm
AFBR-390550RZ
75.8mm
AFBR-390575RZ
101.2mm
25mm
DC-50MBd
6
3.3V/5V
AFBR-390500RZ
AFBR-395025RZ
50.4mm
AFBR-395050RZ
75.8mm
AFBR-395075RZ
101.2mm
AFBR-395000RZ
HFBR-0543Z
Miniature Link 820nm/850nm/1300nm
Industrial Fiber Optic Components
Applications
These cost-effective components with long link-length capabilities can be
used to build high-performance ethernet transceivers. Typical applications
include FDDI, Token Ring, FOIRL, 10Base-FL and 100Base-SX. Glass fiber
specified in this selection guide are multimode fiber both 62.5/125 µm
and 50/125 µm multi-mode glass fiber can be used.
• LAN applications, such as 10Base-FL
• FDDI, Token Ring, 100base-SX
• Audio video links and industrial datalinks
• Wind turbine control system and farm networking
• Hydro and solar power generation plants
• Media and fiber converters
• Railway control systems
• Locomotive in-car and car-to-car communications
• Motorway infrastructures
820nm/850nm/1300nm Industrial Fiber Optic Components
Connector Configuration
Data Reach
Reach
Voltage
Standard RoHS Part Number
Transmitter
ST, SMA, FC
ST, SC, SMA
ST, SC, SMA
ST
ST, SC, SMA
DC-5MBd
1500m
20MBd
2700m
32MBd
2200m
55MBd
1400m
125MBd
700m
155MBd
600m
160MBd
500m
20MBd
3000m
32MBd
2200m
40MBd
1500m
50MBd
1000m
20MBd
5000m
32MBd
3200m
55MBd
3200m
125MBd
2800m
155MBd
2700m
160MBd
2000m
DC-50MBd
2km
Evaluation Board
Receiver
5V
HFBR-14X2Z
HFBR-24X2Z
HFBR-0410Z
5V
HFBR-14X4Z
HFBR-24X6Z
HFBR-0416Z
3.3V/5V
HFBR-14X4Z
AFBR-24X9XZ
AFBR-0550Z
5V
HFBR-1312TZ
HFBR-2316TZ
HFBR-0310Z
3.3V/5V
HFBR-14X4XZ
HFBR-24X8XZ
AFBR-0549Z
7
Plastic Optical Fiber Cables
Applications
The HFBR-E/RXXYYZ series of plastic fiber optic cables are constructed of a single
step index fiber, sheathed in a black polyethylene jacket. The duplex fiber consists
of two simplex fibers joined with a zipcord web. Standard attenuation and extra
low loss POF cables are identical except for attenuation specifications. Polyethylene
jackets on all plastic fiber cables comply with ULVW-1 flame retardant specification
(UL file #E89328). Cables are available in unconnectorized or connectorized
options.
• Industrial data links for factory automation
and plant control
• Intra-system links: board-to-board or
rack-to-rack
• Telecommunications switching systems
• Computer-to-peripheral data links,
PC bus extension
• Proprietary LANs
• Digitized video
• Medical instruments
• Reduction of lightning and
voltage transient susceptibility
• High-voltage isolation
• Power electronics
• Gaming equipment
• Data communications
Compatible with our Versatile Link family of connectors and fiber optic components,
we offer 1mm diameter (outer diameter 2.2 mm) POF in two grades: Standard POF
with 0.22 dB/m typical attenuation or High Performance Extra Low Loss POF with
0.19 dB/m typical attenuation.
Plastic Optical Fiber Specifications: HFBR-E/RXXYYZ
Parameter
Cable Attenuation
Source: 660nm LED, 0.5 NA
(HFBR-15xxZ)
Length: 50m
Reference Attenuation
Source: 650nm, 0.5 NA
(monochrometer)
Length: 50m
Symbol
Standard cable type “R”
Diameter, Core and Cladding
Standard cable type “R”
Connector Code
U =Unconnectorized
N = Standard Simplex Connectors
L = Latching Simplex Connectors
M = Standard Duplex Connectors
T = Latching Duplex Connectors
8
0.15
0.22
0.27
Unit
dB/m
0.15
0.19
0.23
0.12
0.19
0.24
Condition
TA=-40°C to +85°C
TA=-40°C to +85°C
dB/m
TA=-40°C to +85°C
0.12
0.16
0.19
TA=-40°C to +85°C
NA
0.46
0.47
0.50
>2meters
0.94
1.00
1.06
mm
HFBRCable Code
R = Standard Attenuation POF
E = Extra Low Loss POF
Max
R
Extra low loss type “E”
DC
Typ.
o
Extra low loss type “E”
Numerical Aperture
Min.
Z
RoHS Compliant
Length Code
(measured from tip of connector to tip of connector)
Maximum 500 meters (not in 1 meter increments.)
Go to: www.avagotech.com/fiber/cables
e.g. 015 = 15 meters
Channel Code
S = Simplex Cable
D = Duplex Zipcord Cable
POF and HCS Connectors and Accessories
Crimp Style
The HFBR-4501Z, HFBR-4503Z and HFBR-4506Z connector styles are available for
termination of plastic optical fiber: simplex, simplex latching, duplex and duplex
latching. All connectors provide a snap-in action when mated to Versatile Link
components. Simplex connectors are color coded to facilitate identification of
transmitter and receiver connections. Duplex connectors are keyed so that proper
orientation is ensured during insertion. The connectors are made of a flame retardant
VALOX UL94 V-0 material (UL file # E121562).
Crimpless Style
The HFBR-453XZ series connectors are an enhanced version of the HFBR-4501Z
and HFBR-4503Z connectors for plastic optical fiber, compatible with Avago’s
Versatile Link series transmitters and receivers. This design uses a simple, snaptogether concept, which eliminates the need for crimping. User labor and tool cost
are reduced together with the yield loss due to installation error. The HFBR-453XZ
series connectors are available in two-styles: latching and non-latching. For a duplex
connector, two nonlatching simplex connectors can be snapped together. The
connectors are made of a rugged, flame resistant plastic which is good for industrial
and other harsh environments. The HFBR-453XZ series connectors are for use with
plastic optical fiber only.
Plastic Optical Fiber Connectors
Part Number
Description
HFBR-4501Z/4511Z
Gray/blue simplex conector with crimp ring
HFBR-4503Z/4513Z
Gray/blue simplex latching conector with crimp ring
HFBR-4505Z/4515Z
Gray/blue mating adapter for two simplex non-latching POF connectors
HFBR-4506Z/4516Z
Parchment/gray duplex connector with crimp ring
HFBR-4531Z/4532Z
Black crimpless simplex non-latching/latching connector
HFBR-4533Z/4535Z
Blue/gray crimpless simplex non-latching connector
AFBR-4526Z
Black crimpless latching connector (mating transceiver: AFBR-5972Z)
Plastic Optical Fiber Accessories
Part Number
Description
HFBR-4522Z
500 HFBR-0500 products port plugs
HFBR-4525Z
1000 simplex crimp rings
HFBR-4526Z
500 duplex crimp rings
HFBR-4593Z
Polishing kit (one polishing tool, two pieces 600 grit abrasive paper and two pieces 3µm pink lapping film)
AFBR-4594Z
Polishing kit for AFBR-4526Z (One polishing tool, two pieces 600 grit abrasive paper, and two pieces 3um pink lapping film)
HFBR-4597Z
Crimping tool 4.5 - 5.5mm for simplex/duplex crimp rings
9
Industrial Sensors
Optical Arc Flash Detection
Arc flash accidents in electrical power distribution networks are a constant threat to both network infrastructure and human life.
Optical systems are increasingly used to detect and prevent such events with high success.
Avago‘s components for optical arc flash detection help the system engineer to build an efficient and reliable arc flash protection
system. The sensor transceiver is very compact, robust, low light sensitive and with inbuilt selftest functionality. The POF sensor fiber
shows high sensitivity to the arc flash light and is equiped with a robust transparent jacket. Both form a perfect system together with
Avago‘s simplex and duplex VL connectors and mating connectors. An evaluation kit and supporting literature is available for support.
Sensor Transceiver (typical values)
Description
Voltage
Compact TRx with
integrated LED for selftest
5V
and with ASIC for PD and
TIA functionality
Connector
Rx responsitivity
Double VL
AFBR-4526Z
45 V/mW @650nm
TX optical power
-1dBm @ 30mA,
650nm
Part Number
White paper
AFBR-S10TR001Z AV02-4503EN
Eval board
AFBR-S10EB001Z
Sensor Fiber (typical values)
10
Description
Fiber Diameter
Simplex POF with
transparent jacket
to be used as line
sensor, 500m spool
Core and cladding : 1mm
Jacket: 2.2mm
Material
Core: PMMA
0.48
Jacket: PE, transparent
NA
Attenuation
0.14dB/m
Part Number
AFBR-TUS500Z
Eval board
AFBR-S10EB001Z
OPI - Optical Phase Interrogation for Strain Sensing
Avago Technologies offers a unique, cost-effective sensor enabling technology utilizing an
optical phase interrogation (OPI) technique. The technology enables optical fiber to be used as
a distributed sensor element for low-cost, light-weight industrial sensor designs, providing high
electromagnetic interference (EMI) immunity and low electromagnetic susceptibility (EMS).
The technology enables readily available POF (Polymer Optical Fiber) or GOF (Glass Optical Fiber)
with a core diameter > 200 µm to be used for creating robust high-precision strain sensors.
OPI - Development Kit
Description
Part Number
Optical Phase Interrogator (QFBR-S01IN001Z)
• Polymer Optical Sensor Fiber
- 2 x QFBR-SUS050Z (50m)
• Fiber Polishing Kit
• ST- Connectors ( 4 Pcs)
• POE Injector
• Documentation (Manual , Protocol Summary, and Software GUI)
• 1x Ethernet cable (cross-over)
• 2x Ethernet cable (standard)
White Paper
QFBR-S01EK001Z
AV02-4336EN
Attenuation
Part Number
Sensor Fiber (Typical Values)
Description
Simplex POF for OPI sensor implementation. 500 m Spool.
Fiber Diameter
Core and cladding: 1mm
Jacket: 2.2mm
NA
0.47
0.19dB/m
QFBR-SUM500Z
11
Your Imagination. Our Innovation
Avago Technologies is a leading designer,
developer and global supplier of a broad range of
analog, digital, mixed signal and optoelectronics
components and subsystems with a focus in
III-V compound and CMOS based semiconductor
design and processing. Avago’s extensive product
portfolio serves four primary target markets:
wireless communications, enterprise storage,
wired infrastructure, and industrial and other.
Avago has strong market positions across a
broad range of market segments with highly
differentiated products that include:
Film Bulk Acoustic Resonator (FBAR) Filters
• RF Front End Modules
• Parallel Optics Transceivers
• High Speed SerDes ASIC
• HDD Read Channel & Preamplifiers
• RAID and SAS I/O Controllers
• PCIe Switches
• Optocouplers
• Motion Encoders
• Industrial Fiber Solutions
• LED Display & Signage Solutions
For product information and a complete list of distributors, please visit our website:
www.avagotech.com
www.avagotech.com/pof
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2015 Avago Technologies.
AV00-0269EN 5/6/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising