Accessories

Accessories
Accessories
• HD Media Station, page 1
• USB Accessories, page 6
• Micro-USB Port, page 9
• MicroSD Card Slot, page 9
• Connecting to a Monitor, page 10
• Bluetooth, page 11
• 3.5 mm Headsets, page 14
HD Media Station
An HD media station extends the capabilities of Cisco Cius. Media stations feature an adjustable foot stand,
three USB ports for adding external devices such as a USB keyboard or a mouse, two Gigabit Ethernet ports,
an audio jack, and a DisplayPort connection for connecting to an external monitor. Connecting your Cisco
Cius to the media station also charges the Cius battery.
Caution
You can adjust the foot stand of the HD Media Station to adjust the viewing angle. If you adjust the
viewing angle of the media station, be sure to hold the Cisco Cius securely while doing so. Otherwise the
Cisco Cius could fall out and become damaged.
Caution
When connecting cables to the HD media station, route all cables through the middle of the media station
foot stand.
Cisco Cius User Guide, Release 9.2(2)
OL-26189-01
1
Accessories
HD Media Station
The following image shows the front of the HD media station.
Figure 1: HD Media Station, Front View
1
Handset
5
Speaker button
2
Speaker
6
Volume button
3
USB port
7
Mute button
4
Docking ports
Cisco Cius User Guide, Release 9.2(2)
2
OL-26189-01
Accessories
Connect Cisco Cius to an HD Media Station
The following image shows the back view of the HD media station.
Figure 2: HD Media Station, Back View
1
Antitheft security lock connector (lock
optional)
5
Computer port
2
Foot stand
6
Single-mode DisplayPort connection
3
AC power wall plug
7
USB ports
4
Network port
8
Handset connection
Connect Cisco Cius to an HD Media Station
Procedure
Step 1
Step 2
Align the docking ports on the Cisco Cius with the ports on the media station.
Insert the Cisco Cius.
Cisco Cius User Guide, Release 9.2(2)
OL-26189-01
3
Accessories
Wired Network Connection
Power Cisco Cius Through Power Port
Procedure
Step 1
Step 2
Insert the power cable into the HD media station AC power wall plug.
Connect your Cius to the media station.
Power Cisco Cius Through PoE+
Procedure
Step 1
Step 2
Step 3
Insert one end of an Ethernet cable into the media station network port.
Insert the other end of the Ethernet cable into an Ethernet port on a PoE+ enabled Ethernet switch.
Connect your Cius to the media station.
Wired Network Connection
Use an HD media station to connect your Cius to a wired network.
You can also share a wired connection between a computer and your Cius. There is a brief interruption to the
network connection on the computer when you dock your Cius.
Connect Cisco Cius to a Wired Network
Procedure
Step 1
Step 2
Connect an ethernet cable from the HD media station network port to the network.
Dock your Cius.
Share a Wired Network Connection with a Computer
Procedure
Step 1
Step 2
Connect an ethernet cable from the HD media station network port to the network.
Connect an ethernet cable from the HD media station computer port to a network port on the computer.
Cisco Cius User Guide, Release 9.2(2)
4
OL-26189-01
Accessories
Launch the Phone Application
Launch the Phone Application
Lift the handset or press the Speaker key to launch the Phone application.
Related Topics
Phone
Answer a Call
Lift the handset or press the Speaker button to answer a call.
Docking and Undocking During a Call
The Phone application preserves your calls when you dock or undock your Cius with an HD media station.
There is a slight delay before the call audio is reestablished.
Start a Speakerphone Call
Procedure
Step 1
Step 2
Step 3
Press the Speaker key.
Enter the phone number or select a contact.
Tap Call.
Switch to a Speakerphone Call
With the handset off the hook, press the Speaker key to switch to a speakerphone call.
To switch back to a handset call, place the handset on hook and lift the handset again.
End a Speakerphone Call
Press the Speaker key during a speakerphone call to end that call.
Adjust the Ringer Volume
Press the Volume key to adjust the phone ringer volume up or down.
Cisco Cius User Guide, Release 9.2(2)
OL-26189-01
5
Accessories
Updating Media Station Firmware
Updating Media Station Firmware
You receive a notice to reboot your Cius when it is docked and new media station firmware is available. To
apply the firmware update, your Cius must be docked while it reboots.
USB Accessories
Each available Cisco Cius HD media station features three USB ports: two on the back, and one on the right
side.
The USB ports allow you to use any of the following accessories:
• USB keyboard
• USB mouse
• USB memory stick
• USB-powered hub
• USB serial console cable
USB Keyboard and Mouse
Not every USB keyboard or mouse works with Cisco Cius. However, most USB keyboards that are human
interface device (HID) compliant will work correctly. Since all USB hubs need to be powered, keyboards that
include one or more hubs are not allowed on Cius, because they contain a non-powered hub.
Cisco Cius Key Shortcuts
The following keyboard shortcuts are available for Cius:
•
Menu: Shift-Ctrl-[
•
Home: Shift-Ctrl-]
• Press and hold Shift-Ctrl-] to view a list of open and recently used applications.
•
Back: Shift-Ctrl-\
Typing Shortcuts
• Alt + Spacebar: Insert a special character
•
•
•
Menu
+ X: Cut text (cuts all text on-screen unless specific characters are highlighted)
Menu
+ C: Copy text to clipboard (copies all text on-screen unless specific characters are highlighted)
Menu
+ V: Paste text from clipboard
Cisco Cius User Guide, Release 9.2(2)
6
OL-26189-01
Accessories
USB Keyboard and Mouse
•
Menu
+ A: Select all text in the current field
Browser Shortcuts
• Spacebar: Page down
• Shift + Spacebar: Page up
•
•
•
•
•
•
•
•
Menu
+ I: Zoom in
Menu
+ O: Zoom out
Menu
+ J: Go back a page
Menu
+ K: Go forward a page
Menu
+ R: Refresh current page
Menu
+ F: Find on page
Menu
+ B: Open bookmarks
Menu
+ S: Open social network sharing menu
Gmail Shortcuts
• F: Forward current message (works only while viewing a message)
• R: Reply to current message (works only while viewing a message)
• A: Reply-all to current message (works only while viewing a message)
• Y: Archive message
•
•
Menu
+ U: Refresh inbox
Menu
+ C: Compose new email message
• Enter: Open an email message
Mouse Actions
The following mouse actions are available for Cisco Cius:
• Click: tap
•
Right-click: display the Menu
, Home
and Back
keys on screen
Cisco Cius User Guide, Release 9.2(2)
OL-26189-01
7
Accessories
USB Memory Stick
Note that right-clicking in a desktop virtualization application may display a context-sensitive menu, rather
than display the Menu, Home and Back keys.
• Scroll: Use the mouse scroll wheel to move the highlight or focus to a different item on the screen
VDI Shortcuts
The keyboard shortcuts and mouse actions available in virtual desktop clients differ from those for other Cius
applications.
Keyboard Shortcuts
Control key meta-state (combination keys), Num Lock, and Caps Lock state are not currently supported by
many of the virtual desktop clients on Android. For a description of what shortcuts are supported, please see
the product description for each application.
Mouse Shortcuts
The Cius platform maps the mouse events into touch screen input and the VDI clients usually map the touch
screen input to customary Android actions, resulting in the following behavior:
• Click: tap
• Click and drag: Scroll up and down, or left and right, on the remote desktop
• Click, hold and drag: Move windows, scroll bar handles and other objects on the remote desktop
Some applications on a remote desktop are designed for a larger screen size. To avoid cutting off part of an
application in a virtual desktop client, it is recommended that you set the remote desktop to a larger screen
size than the Cius screen size.
USB Memory Stick
Insert a USB memory stick into a USB port to expand the available disk space of the Cisco Cius.
The USB memory stick is mounted at /sdcard/external/usb-sda1.
USB-Powered Hub
Use a USB-powered hub to expand the number of available USB ports. USB-powered hubs allow you to
connect up to five USB accessories to each USB port.
USB Console Cable
A USB console cable is typically used only for debugging by a system administrator.
For more information about how to use a USB console cable, contact your system administrator.
Cisco Cius User Guide, Release 9.2(2)
8
OL-26189-01
Accessories
Micro-USB Port
Micro-USB Port
Use the micro-USB port on top of Cisco Cius for USB storage or for Android Debug Bridge (ADB) access.
You cannot attach other accessories to the micro-USB port.
Turn On USB Storage
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Use a micro-USB cable to connect your Cius to a computer.
Drag down the notification bar.
Tap USB Connected.
Tap the Turn On USB Storage button.
Tap OK.
Turn Off USB Storage
Procedure
Step 1
Step 2
Step 3
Drag down the notification bar.
Tap Turn Off USB Storage.
Tap the Turn Off USB Storage button.
MicroSD Card Slot
Insert a microSD card into the microSD card slot to expand the available disk space of the Cisco Cius.
Cisco Cius User Guide, Release 9.2(2)
OL-26189-01
9
Accessories
Mount a MicroSD Card
Mount a MicroSD Card
Procedure
Step 1
Step 2
Insert a microSD card into the microSD card slot.
Step 3
Tap Settings .
Tap SD Card & Phone Storage.
Tap Mount SD Card. The microSD card is mounted at /sdcard/external/SDCARD.
Step 4
Step 5
Tap the Applications Menu icon
on the home screen.
Format a MicroSD Card
Procedure
Step 1
Step 2
Insert a microSD card into the microSD card slot.
Step 3
Tap Settings .
Tap SD Card & Phone Storage.
Tap Format SD Card.
Step 4
Step 5
Tap the Applications Menu icon
on the home screen.
Connecting to a Monitor
Connect Cisco Cius to a monitor by inserting one end of an HDMI cable into the micro-HDMI port and the
other end into a monitor HDMI port.
Connect Cisco Cius to a monitor through an HD media station by inserting one end of an HDMI a DisplayPort
cable into the micro-HDMI port DisplayPort connection and the other end into a monitor HDMI port.
DisplayPort connection.
Caution
When connecting cables to the HD media station, route all cables through the middle of the media station
foot stand. When connecting a DisplayPort cable to the media station, do not use the lowest two levels of
the foot stand because the cable connector may come into contact with the desk. This can cause damage
to the cable connector and can result in an unbalanced media station.
Your Cius screen is displayed on an external monitor at a resolution of 1024x600 pixels.
If Cisco Cius enters sleep mode, the monitor enters sleep mode, too.
Cisco Cius User Guide, Release 9.2(2)
10
OL-26189-01
Accessories
Edit HDMI Settings
Edit HDMI Settings
Procedure
Step 1
Step 2
Step 3
Step 4
Connect your Cisco Cius to a monitor.
Tap the Applications Menu icon
Tap HDMI.
Edit your HDMI settings.
on the home screen.
Virtual Desktop Infrastructure
Some applications on a remote desktop are designed for a larger screen size. To avoid cutting off part of an
application in a virtual desktop client, it is recommended that you set the remote desktop to a larger screen
size than 1024x600.
For more information about VDI application settings, please see the product description for each application.
Bluetooth
Cisco Cius supports Bluetooth 2.1+EDR, with headsets that support Hands-Free Profile (HFP) for voice
communications and Advanced Audio Distribution Profile (A2DP) for streaming audio. Cisco Cius also
supports Object Push Profile (OPP) for generic file exchange over Bluetooth.
Bluetooth HFP support offers the following features:
• Ring
• Answer a Call
• End a Call
• Volume Control
• Last Number Redial
• Call Waiting
• Divert/Reject
• Three-Way Calling
◦ Hold and Accept
◦ Release and Accept
• Speed Dial
Bluetooth A2DP support allows for the uni-directional transfer of an audio stream to other Bluetooth-enabled
devices, such as a stereo headset or a car audio system.
Cisco Cius User Guide, Release 9.2(2)
OL-26189-01
11
Accessories
Enable Bluetooth
You can use a Bluetooth device up to 30 feet (10 meters) away from your Cisco Cius. However, for best
performance, it is recommended that you use Bluetooth devices within 10 feet (3 meters) of the Cisco Cius.
Enabling Bluetooth may degrade your Cius wireless connection. For improved wireless network performance,
disable Bluetooth when it is not in use, or use the 5GHz band for your wireless network connection.
Enable Bluetooth
Procedure
Step 1
Tap the Applications Menu icon
Step 2
Tap Settings .
Tap Wireless & Networks.
Step 3
Step 4
on the home screen.
Tap Bluetooth.
Edit Bluetooth Settings
Procedure
Step 1
Tap the Applications Menu icon
Step 2
Tap Settings .
Tap Wireless & Networks.
Tap Bluetooth Settings.
Step 3
Step 4
on the home screen.
Scan for Bluetooth Devices
Tap Scan for Devices if devices do not appear in the Bluetooth devices submenu.
Pair a Bluetooth Device
Procedure
Step 1
Step 2
Step 3
Tap Bluetooth in the Bluetooth Settings menu.
Select the device to pair from the Bluetooth devices submenu.
Cisco Cius attempts to connect with the paired device with the PIN code 0000.
If pairing is unsuccessful, Cisco Cius prompts you for a PIN code.
Cisco Cius User Guide, Release 9.2(2)
12
OL-26189-01
Accessories
Unpair a Bluetooth Device
Step 4
When the device connects, the status under the device name in the Bluetooth devices submenu shows that the
device is connected.
Unpair a Bluetooth Device
Procedure
Step 1
Step 2
Tap and hold a device in the Bluetooth devices submenu.
Tap Unpair.
Make the Cius Discoverable
Tap Discoverable. Your Cius will be discoverable for 120 seconds.
Set Your Bluetooth Device Name
Procedure
Step 1
Tap the Applications Menu icon
Step 2
Tap Settings .
Tap Wireless & Networks.
Tap Bluetooth Settings.
Tap Bluetooth.
Tap Device Name.
Enter a device name and tap OK.
Step 3
Step 4
Step 5
Step 6
Step 7
on the home screen.
Sharing Files
Procedure
Step 1
Step 2
Pair your Cius with another Bluetooth enabled device.
Select a file to share. For example, you can share a photo from the Gallery application, or a contact from the
Contact application.
Step 3
Select Bluetooth from the Share menu.
Cisco Cius User Guide, Release 9.2(2)
OL-26189-01
13
Accessories
Disconnect a Bluetooth Device
Disconnect a Bluetooth Device
Procedure
Step 1
Step 2
Tap and hold device in the Bluetooth devices submenu.
Tap Disconnect.
Disconnect and Unpair a Bluetooth Device
Procedure
Step 1
Step 2
Tap and hold a device in the Bluetooth devices submenu.
Tap Disconnect and Unpair.
3.5 mm Headsets
You can plug a 3.5 mm headset into the headset port at the bottom of your Cisco Cius.
You can plug a 3.5 mm headset into the headset port on the HD media station, and use the headset for phone
calls. The headset port is the top port on the left side of the HD media station.
You can plug a 3.5 mm headset into the lineout port on the HD media station, and use the headset to listen to
media. The lineout port is the bottom port on the left side of the HD media station.
Note that the headset and lineout ports on the HD media station are two distinct ports. Cisco Cius does not
support two-prong headsets.
Cisco Cius User Guide, Release 9.2(2)
14
OL-26189-01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising