STE100A-232 STE100A-Serial
Ethernet Serial Server
STE100A-232
STE100A-Serial
RS232 Serial Server
RS485/232 Serial Server
The IP Device Server provides the serial device server for hosts to control RS-232, 2 or 4 wire asynchronous RS-422/485
serial devices located virtually anywhere through a TCP/IP or UDP/IP connection. The Device Server has the DB9 port
connection on one side, and a 10/100 Mbps Ethernet connection on the other side. It connects serial devices such as PLC,
alarm sensors and PTZ camera control to IP networks. Applications include industrial/factory automation, public safety
and surveillance systems. The IP Device Server Windows driver is designed to control the IP Serial Server devices. The
driver installs a virtual COM on Windows which maps the virtual COM port to the IP address of the IP Serial Server device
across the network, enabling the Windows applications to access remote serial devices over Ethernet. IP Device Server
can function as a UDP or a server or client for TCP connection. The application scenarios are direct IP mode, virtual COM
mode, and paired mode.
Feature
▪▪ Supports Web Management
▪▪ Supports IETF RFC4553 Structure-Agnostic TDM over Packet
(SAToP), Metro Ethernet Forum MEF8
▪▪ 8 /16 x E1 NRZ Serial Interface with LOS/AIS detection
▪▪ Use Raw Encapsulation method for PDH payload over IP packet
▪▪ Supports Circuit Emulation Service over IPE
▪▪ Comply with IETF draft standard for CESoPSN and SAToP; Metro
Ethernet Forum MEF8 IA
▪▪ Supports both Point-to-Point and Point-to-Multipoint operation
▪▪ Configurable IEEE 802.3 DA/SA assignment
▪▪ Supports 8/16 independent Adaptive Clock recovery block for
Ingress PDH (PSN->TDM) clock generation. Recovered clock jitter
is compliant with ITU-T G.823 (E1 Jitter Control)
▪▪ Independent configurable jitter buffer depth to compensate up
to 250ms of Packet Delay Variation
▪▪ Lost packets processing / compensation via PW (Pseudo Wire)
control field Sequence Number
▪▪ PDH LOS detection triggered PW L field or payload AIS generation
at Egress direction (TDM->PSN)
▪▪ LED alarm display for E1 Power failure status
Specifications
General
LED
OS supported
Serial Interface
Serial Connector
Baudrate
Data bits
Stop bits
Parity
Flow Control
Data Packing
Delimiter
Ready, TP Link/Act, Data TX/RX
Windows XP / 2000 / 2003 / 2008 /
VISTA / WIN7 / WIN8
STE100A-Seria l : RS-232/422/485
STE100A-232 : RS-232
DB9 Male
110 to 230.4Kbps
5, 6, 7, 8
1, 1,5 for Data bits 5 mode; 1, 2 for data bits 6, 7, 8
mode
None, Even, Odd
None or RTS / CTS for RS-232
Full Duplex(4-Wire) or Half Duplex(2-Wire) for
RS-422/485
1,2
LAN Interface
Communication
Modes
Protocols
Management
Security
Power
Operating
Temperature
Storage
Temperature
Humidity
DIN rail mount
Panel mount
Dimensions
Certifications
Application
Device
TCP Server, TCP Client, Virtual COM mode, UDP
TCP, UDP, IP, ARP, ICMP, HTTP, DHCP
Web pages, Firmware upgrade
Password Access
12VDC
0 ~ 60°C
-10 ~ 70°C
0 – 90% non-condensing
Yes
Yes
85.8 x 84.2 x 22mm (D x W x H)
with DIN-Rail Mounting Kit
CE, FCC
STE100A-Serial
STE100A-Serial
RS-232/422/485
RJ-45 connector, IEEE802.3 10/100Base-TX
10/100Base-T Ethernet
UDP, TCP Server
RS-232/422/485
UDP, TCP Client
Remote Host
Device
Local Host
IP Network
Ethernet
STE100A-Serial
RS-485 2 Wire
PLC 1…………....…………………
10-1
ww w.ct cu.com sales@ ct cu.com
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
32
Ethernet Serial Server
Appearance
STE100A-232
STE100A-Serial
Power input 12 to 48VDC
Power input 12 to 48VDC
Load Default/Reset Button
Load Default/Reset Button
Ethernet RJ45 10/100Mbps
Ethernet RJ45 10/100Mbps
10
Ethernet Serial Server
RS-232
RS-232/422/485
Dimensions
STE100A-232
STE100A-Serial
Unit: mm (inch)
RS-232
RS-232/422/485
RS-232/422/485
Ordering Information
Model Name
Description
STE100A-232
1-port RS232 device server with AC power adapter
STE100A-Serial
1-port RS232/422/485 device server with AC power adapter
Optional accessories
STE100A-Serial-WT
STE100A-Serial DB9 wiring terminal
STE100A/DRK01
STE100A/RS232,STE100A/Serial DIN-Rail Mounting Kit
Din-Rail Mounting Kit
STE100A/DRK01
DB9 Wiring Terminal
STE100A-Serial-WT
(only for STE100A-Serial)
Optional Power
DC-APT/12V
-48VDC to 12VDC Adapter - 0.83 Amp, 10 Watts , Output 12 VDC, Input -48VDC
ww w.ct cu.com sales@ ct cu.com
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
10-2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising