Tri-View Mirrored Cabinet Installation Instructions

Tri-View Mirrored Cabinet Installation Instructions
GLASSCRAFTERS, INC
193 Veterans Blvd., Carlstadt, NJ 07072
1+(800) 233-7362 (F) 1+(888) 233-7362
sales@glasscraftersinc.com
Tri-View Mirrored Cabinet
Installation Instructions
Congratulations on your purchase of Americas finest Mirrored Cabinet by GlassCrafters, Inc.
World class engineering and state of the art design will enable you to enjoy your cabinet for many years to come.
We realize that the marketplace offers many choices and we thank you for selecting
GlassCrafters for your Mirrored Cabinet needs.
The following instruction sheets include Models GC3630-Tri, GC4830-Tri, GC3636-Tri and GC4836-Tri
in the 4” deep series.
To insure proper installation we recommend installation by a professional installer.
GC3630-Tri
GC3636-Tri
GC4830-Tri
GC4836-Tri
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
To view a video showing helpful tips on how to -- adjust our Cabinet HInges or to install our Mirrored Side Kits, please go to:
GlassCraftersMirroredCabinets.com and navigate to the cabinet product that you are installing. Simply click on the installation tab
(located below the product images) to view our installation videos.
Please use extreme care while unpacking and handling your GlassCrafters’ Mirrored Cabinet. Report any damage immediately to our
GlassCrafters’ customer service team at 800-233-7362, Monday thru Friday from 8:00 am to 5:00 pm (EST)
Revised 05/2016
1
Tri-View Mirrored Cabinet Installation -- Unpack all parts carefully
and protect Glass and Mirror parts during installation.
Index
Parts List for All Models ....................................2
Determining the Rough Opening......................3
Recessing the Cabinet .....................................4 & 5
Surface Mount Cabinet.....................................6 & 7
Surface Mount Side Kit Installation...................8
Glass Shelves...................................................9
Cleaning Recommendation ..............................9 & 12
Door Installation and Adjustment......................10
Limit Clips.........................................................11
Parts Inventory by Model Number ....................12
Warranty ...........................................................12
Parts List
Carefully review all parts and read the installation
instruction before you start.
Please refer to page 12 for the exact parts list and item
counts for each model number.
1
Section
15
1. Cabinet
2. Door
3. Plastic Wall Anchors
4. Wall Anchor Screws
5. Bottom Surface Mount Wall Bracket
6. Top Surface Mount Bracket
7. Screw Caps
8. Shelf Clips
2
9. Hole Plugs
10. Glass Shelves
11. Cabinet Connector Mounting Screws
12. Hinge Cover Name Plates
13. 130 Degree Limit clips
14. Soft Close Cushion
15. 3X Magnification Mirror
To insure proper installation
in complete compliance with
your warranty,
we recommend installation
by a professional installer.
Tools Required for Installation
GlassCrafters recommends the following tools to
properly and safely install your Mirrored Cabinets.
A. Safety Glasses -- should be worn at all times
B. Tape Measure
C. Level
D. #2 Phillips Head Screw Driver
E. Power Screw Driver
F. Electric Drill
G. 8mm 3/16” Masonry Drill Bit
H. 7/32” Drill Bit
I. Non Ammonia Household Glass Cleaner
J. Soft Paper Towels
Determining the Rough Opening
“RO” Dimension
Framing in new construction should follow these dimension. Standard 2x4 studs and 1/2” sheetrock are shown
in the illustrations.
Model Number
Rough Opening
Tri-View Cabinet
Width
Height
GC3630-Tri
35 3/8”
29 3/8”
GC4830-Tri
47 3/8”
29 3/8”
GC3636-Tri
35 3/8”
35 3/8”
GC4836-Tri
47 3/8”
35 3/8”
Height: overall cabinet height less 5/8” = R.O. Height.
Rough Opening:
Note: Cabinet installs over finished wall with sheetrock
and/or tile finishes completed. 3/4” Flange on all sides of
the cabinet will cover the remaining space in the R.O.
Important: Make sure you allow for a
minimum of 1” clearance above any
obstruction such as faucets, etc.
3
Installing a Tri-View
Recessed
Mirrored Cabinet
A. Determine the rough opening for the cabinet. Refer to
“R.O.” formula chart on page 3. Opening must be plumb
and level.
B. Cabinet can be hinged on left or right. Simply flip the
cabinet to change hinge location. REMINDER- The doors
are shipped installed on the cabinet. Remove the doors
before working with the cabinet for any type of installation. Simply lift the snap plate in the inside edge of the
hinge and lift out of the Hinge toe. ( See page 9 for hinge
diagrams.) PLACE THE DOORS IN A SAFE AREA ON A
PIECE OF CARPET WITH CARDBOARD IN BETWEEN
EACH DOOR TO AVOID DAMAGE AND SCRATCHES.
C. Insert cabinet in R.O. and center, Cabinet Flange covers any space in the R.O. around the cabinet and should
cover the finished surfaces--Sheetrock and/or tile.
Install the cabinet with four (4) #10 x 1 1/2” wood screws
(supplied). Use the pre-punched holes above and below
the hinge plates (as shown). Do not overtighten. Cover
screws with four screw caps (part #434).
A
4
B
Hinge Plates shown for right hinged doors
C
Shown here -- Left, Right and Right
hinge side door swings
5
Installing a
Surface Mount Mirrored Cabinet
Determine the desired height and use a level to mark a
horizontal line. Be sure to allow a minimum clearance of 1”
above any obstruction and plumbing fixtures. Remember
the base of the cabinet box is 3/4” smaller than the face
and the door.
1) Keep Minimum of 1” Clear
Above faucet
6
4 -- Lower onto
wall bracket.
4 -- Tip up flush to the wall.
Mark postions for top
brackets and drill for stud
or for wall anchor.
5 - Use a hand screw driver to
fix the top brackets to the wall.
7
Side Kit Mirror Installation
For surface mounted 4” & 6” Mirrored Cabinets and
6” semi-recessed Mirrored Cabinets.
1) Attach the side mirror kit brackets thru the pre-punched
holes in your cabinet.
2) Try to use the first row from the top and bottom of your cabinet. Using the eight 10-32 x 1/2” screws fasten the
brackets and finish with screw caps.
3) Attach the 2” x 2” foam pads to the outside cabinet wall
above, below and in between the position of the brackets.
4) Clean the backside of the side mirror kit panel with the Alcohol pads. Check alignment before you attach the mirror to be
sure it will align even with the top of the cabinet.
5) Peel off paper covering of the adhesive tape on the side kit
brackets pads. (This holds the mirror in place). Carefully align
the mirror to the cabinet evenly on all four sides. Press firmly
into place and attach to the side kit mirror to the cabinet body.
Side Mirror Kit parts list:
2 Mirror side panels to match
the model height ordered
4 Side kit brackets with adhesive tape
6 2”x2” Black Foam Pads with
peel off adhesive tape on both
sides
8 Screws, 10-32 x 1/2”
8 Screw Caps ( part # 434-00)
2 Alcohol Pads
To view a video showing helpful
tips on how to install side mirror
kits, please go to GlassCraftersMirroredCabinets.com
and navigate to the cabinet
product that you are installing.
Simply click on the
installation tab (located below
the product images) to view our
installation videos.
(Note: Once installed, do not try to remove the mirror as it will break.)
Side Mirror Bracket
10-32 1/2” Screws
2” x2” Foam Pads
Side Mirror
Align mirror to level
with Top Edge
2”x 2” Black
Foam Pads
with peel off
ahesive side
affix pads
to the
cabinet
Side Mirror Kit
Side Mirror Bracket
Peel off paper
covering adhesive
Side Mirror Bracket
Install Side Mirror Kit:
Side Mirror Bracket
Peel off paper
covering adhesive
8
• Install brackets
• Install foam pads
on the cabinet
above, below and
in between
the brackets
• Clean back side of
mirror with
alcohol pads
• Align mirror
top and bottom
• Press firmly in place
• Peel-off paper
covering the
adhesive tape
on the brackets(this holds the
mirror in place)
(Do not try to remove
mirror as it will break)
Glass Shelves Installation
After the Mirrored Cabinet box has been properly installed, determine the appropriate height and location for
the glass shelves.
Note: make sure the back wall mirror has been
completely cleaned after installation. If cleaning the back
wall mirror is necessary, use a household non-ammonia
glass cleaner.
Cleaning Recommendations:
Never use abrasive cleaners or cleaners containing
ammonia. This may cause chemical damage to the
mirror and void the warranty.
For cleaning the mirror, we recommend using
“ammonia free” Sprayway brand glass cleaner,
which is available at a variety of retail outlets.
www.spraywayinc.com/content/glass-cleaner
Each glass shelf will require four (4) shelf
clips. Use care when handling the non-tempered glass shelves. On a level plane insert
the shelf clips into the pre-punched holes. The
clips are designed for a tight tension fit to hold
the shelf. Place each glass shelf on the top of
the left clip first, then slowly lower onto the right clip with
a snap fit.
After glass shelves are installed insert hole plugs in all
open holes to complete installation.
Hole Plugs
GC3630-Tri
GC4830-Tri
GC3636-Tri
GC4836-Tri
9 Shelves + 36 Shelf Clips
9 Shelves + 36 Shelf Clips
12 Shelves + 48 Shelf Clips
12 Shelves + 48 Shelf Clips
9
Door Installation
The doors are shipped installed on the cabinet.
Before installing any cabinet you should have 2) Lift and snap
into place
carefully removed the doors from the cabinet
and place in a safe location on a piece of carpet with protective cardboard in beween each
door to prevent damage and scratches.
Hinge Plate
To reinstall the doors: *Hold the door in the upright position. Snap open the factory installed
hinges. Place the hinge onto the factory-installed mounting plate in the cabinet -- Toe first
-- and snap into position. Be careful not to chip
the door mirror.
Door with Hinge
1) Insert into
Hinge Toe
first
*Do not remove corner protectors until the door
#1
is installed
Screws adjust
for Fit alignment
left and right
to cabinet face
#2
Screws adjust
for Fit to
Top and Bottom
to cabinet face
#3
Screws adjust
for Flush Fit
to cabinet face
Corner Protectors
Hinge Toe Plate
Blum Hinge Adjustment
After adjustments are complete place cover caps on hinges.
Hinge Cover Name Plate
Hinge Plate* Factory Installed.
*If the door binds and does not fully close, adjust
the Hinge Plate on the cabinet up and down, to
relieve the tension
To view a video showing helpful tips on how to install side
mirror kits, please go to GlassCraftersMirroredCabinets.com
and navigate to the cabinet product that you are installing.
Simply click on the
installation tab (located below the product images) to view
our installation videos.
10
#3 Screw Adjust
Front to Back
#2 Screw -
#1 Screw -
Adjust
Top to Bottom
Adjust Left to Right
Limit Clips
Limit Clips are provided should you need to reduce the
opening swing of the cabinet door from 170 degrees to
130 degrees (see top view) This will eliminate the possibility of the door hitting a wall sconce or other decorative
items.
Finished surface
Cabinet
170º swing
Finished surface
Cabinet
130º swing
Rececess Cabinet Door Swing Diagrams
11
Master Parts List for Tri-View Mirrored Cabinets
Model: GC3636-Tri-4"
Model: GC3630-Tri-4"
Qty.
Part Number
Cabinet 4" Cabinet
1
GC3630-4”-Cab
Door - Ships installed on cabinet
3
GC1230-D
Note : Remove doors before recessed or wall mount installation.
Plastic Wall Anchor
8
# 10 PWA
Wall Anchor Screws
8
# 10 x 1 1/2 Phillips
Bottom Surface Wall
Mount Bracket
1
414-03
Top Surface Mount Brackets
4
425-00
Screw Caps
6
434-00
Shelf Clips
36
439-01
Hole Plugs
72
433-00
Glass Shelves 4" Cabinet
9
417-11-A 3 7/16” x
10 1/4" x 5/16"
Hinge Cover Name Plates
6
904-00
130 Degree Limit Clips
6
901-00
Soft Close Cushion
6
900-00
3X Magnification Mirror
1
950-01
Model: GC4830-Tri-4"
Qty.
Part Number
Cabinet 4" Cabinet
1
GC4830-4”-Cab
Door - Ships installed on cabinet
3
GC1630-D
Note : Remove doors before recessed or wall mount installation.
Plastic Wall Anchor
8
# 10 PWA
Wall Anchor Screws
8
# 10 x 1 1/2 Phillips
Bottom Surface Wall
Mount Bracket
1
414-03
Top Surface Mount Brackets
4
425-00
Screw Caps
6
434-00
Shelf Clips
36
439-01
Hole Plugs
72
433-00
Glass Shelves 4" Cabinet
9
417-12-A 3 7/16” x
14 1/4" x 5/16"
Hinge Cover Name Plates
6
904-00
130 Degree Limit Clips
6
901-00
Soft Close Cushion
6
900-00
3X Magnification Mirror
1
950-01
This installation manual serves the complete line of GlassCrafters, Inc Mirrored Cabinets including the 4” deep Tri-View models. The general parts list
pictured on page 2 shows the single images of a part. To completely inventory the material delivered for your particular model please check the quantities indicated in the part list above.
WARRANTY
GlassCrafters, Inc. offers a Limited 3 Year Warranty on all mirrored cabinet products.
GlassCrafters’ warranty provides the original purchaser a guarantee that it will replace or
at its own discretion repair products shown to have substantial defects in workmanship
or materials. These claims must be filed with your dealer or professional installer and forwarded in writing to GlassCrafters within three years of the delivery date to the end user
of the product. GlassCrafters shall not be responsible for any installation or removal
costs. This warranty does not apply to the following, chemical or natural corrosion of the
mirror. The use of abrasive cleaners or cleaners containing ammonia will cause chemical damage to the mirror, voiding this warranty.
The GlassCrafters warranty does not cover product that is damaged in shipping, accidents in handling during installation or if the reported defects are a result of faulty installation, abuse, misuse, abnormal wear, poor maintenance, accident or repairs by service
personnel other than the original professional installer as authorized by GlassCrafters.
After the three year period GlassCrafters shall not have any further obligation, expressed
or implied including merchantability under the Limited Warranty.
Qty.
Part Number
Cabinet 4" Cabinet
1
GC3636-4”-Cab
Door - Ships installed on cabinet
3
GC1236-D
Note : Remove doors before recessed or wall mount installation.
Plastic Wall Anchor
8
# 10 PWA
Wall Anchor Screws
8
# 10 x 1 1/2 Phillips
Bottom Surface Wall
Mount Bracket
1
414-03
Top Surface Mount Brackets
4
425-00
Screw Caps
6
434-00
Shelf Clips
48
439-01
Hole Plugs
80
433-00
Glass Shelves 4" Cabinet
12
417-11-A 3 7/16” x
10 1/4" x 5/16"
Hinge Cover Name Plates
9
904-00
130 Degree Limit Clips
9
901-00
Soft Close Cushion
6
900-00
3X Magnification Mirror
1
950-01
Model: GC4836-Tri-4"
Qty.
Part Number
Cabinet 4" Cabinet
1
GC4836-4”-Cab
Door - Ships installed on cabinet
3
GC1636-D
Note : Remove doors before recessed or wall mount installation.
Plastic Wall Anchor
8
# 10 PWA
Wall Anchor Screws
8
# 10 x 1 1/2 Phillips
Bottom Surface Wall
Mount Bracket
1
414-03
Top Surface Mount Brackets
4
425-00
Screw Caps
6
434-00
Shelf Clips
48
439-01
Hole Plugs
80
433-00
Glass Shelves 4" Cabinet
12
417-12-A 3 7/16” x
14 1/4" x 5/16"
Hinge Cover Name Plates
9
904-00
130 Degree Limit Clips
9
901-00
Soft Close Cushion
6
900-00
3X Magnification Mirror
1
950-01
Cleaning Recommendations:
Never use abrasive cleaners or cleaners containing ammonia. This may cause chemical damage to the mirror
and void the warranty.
For cleaning the mirror, we recommend using ammonia free
Sprayway brand glass cleaner, which is available at a variety
of retail outlets. www.spraywayinc.com/content/glass-cleaner
Blum hinges and soft closing cushions have a separate lifetime warranty from
Blum, Inc. This warranty is against defects in materials and workmanship as long as
the original consumer owns the product. This is a warranty of replacement. After verification of defect, Blum, Inc. will send replacement hardware without charge.
GlassCrafters shall not have any liability for any consequential damages stemming
from or in connection with the use per performance of this product. Prevailing state
law on the limits of the implied warranty will apply.
The liability of GlassCrafters under any implied or expressed warranty, including merchantability, is expressly limited to the terms of this warranty. Any claim under this
warranty must be made directly to the dealer of record.
Permission to return any merchandise under this warranty must be authorized in writing by GlassCrafters and must include prepaid shipping by the purchaser.
GLASSCRAFTERS, INC
193 Veterans Blvd., Carlstadt, NJ 07072
1+(800) 233-7362 (F) 1+(888) 233-7362
sales@glasscraftersinc.com
12
Revised 05/2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising