Produktkatalog
Optical transceiving systems
FIBER LINE optical receivers
FIBER LINE optical transmitters
FIBER LINE plus
Optical nodes - COMPACT LINE
Accessories optical nodes COMPACT LINE
Accessories Optical nodes ASC/ALSC module
Optical nodes - MINI NODE
Accessories optical nodes - MINI NODE
... a link to the future
FIBER LINE optical receivers
LR 52
Optical Dual Return path receiver
- Dual optical return path receiver
for WISI TOPLINE HEADEND
- Optical input level -12 dBm ... +2 dBm
- 2 input channels with 50 dB crosstalk isolation
- NMS via Headend controller OV 51S or
remote interface OV 52
- Input frequency range 5-100 MHz
- Input wavelength from 1290 to 1600 nm
- LASER CLASS 1
RF characteristics
Frequcency range
5 - 100 MHz
Impedance
75 Ω
Amplitude response
< ± 0,75 dB
Output level
ALC on
90 dBµV ± 2 dB
Attenuation
ALC on
0 - 20 dB
ALC off
0 - 50 dB
Dual mode
> 50 dB
Combining
mode
> 20 dB
Isolation betweer output 1-2
Redundancy > 20 dB
mode
Output return loss
18 dB
Testpoint
- 20 dB
Optical characteristics
Wavelength
1290-1600 nm
Input level
-12 dBm...+2 dBm
Fiber
single mode 9 /
125 µmn
Connector
E 2000 APC
F-type
NMS-Functions
Monitoring
Selection of
in and
output Mode
Test Piont
Optical Input
level
Optical Input
ALC
Redundancy
threshold
Selection
Mode
Dual, redundancy,
combining
ALC
Optical power
Redundancy
threshold
Alarms
Redundancy < -20 dB
Optical power
Generals
PAGE 166
Housing
Zinc die-cast
Operating temperature
0C°...+50°C
Storage temperature
-25C°...+75°C
Max. humidity, non condensing
95%
EMC
CE, Class A
FIBER LINE optical transmitters
LT 53
LT 53 0400
DFB laser module
- Optical transmitter for WISI TOPLINE HEADEND
- Input frequency range 5-862 MHz
- Wavelength 1310 nm
- NMS via Headend controller OV 51S or
remote interface OV 52
- LASER CLASS 1
RF parameters
Input frequency range
5-862 MHz
Input level (42 channels)
88 dBµV ± 4 dB
Level adjustment
10 dB
C/N for 42 channels, opt., link=4 dB
> 50 dB
CSO for 42 channels CENELEC
> 60 dB
CTB for 42 channels CENELEC
> 63 dB
Test socket
- 20 dB
Optical parameters
Laser type
uncooled isolated
DFB laser
Wavelength
1310 nm ± 20 nm
Optical output power
LT 53
2.5 mW (4 dBm)
LT 53 0400
4mW (6 dBm)
NMS functions
Monitoring
Laser bias
Laser temperature
Laser output
power
Level adjustment
RF power at laser
Generals
Housing
Connectors
Zinc die-cast
RF
F-type
optical
E 2000 APC
Dimensions
30x260x200 mm
Operating temperature
-10°C...+50°C
Storage temperature
-25°C...+75°C
Max. humidity, non condensing
95%
Packing unit
1 piece,
4.6 dm³, 2.2 kg
EMC
CE, Class A
PAGE 167
FIBER LINE optical transmitters
LT 54 1000
DFB laser module
- Optical transmitter for WISI TOPLINE HEADEND
- Input frequency range 5-862 MHz
- Wavelength 1310 nm
- NMS via Headend controller OV 51S or
remote interface OV 52
- LASER CLASS 1 M
RF parameters
Input frequency range
5-862 MHz
Input level (42 channels)
88 dBµV ± 4 dB
C/N for 42 channels, opt., link=10 dB
> 53 dB
CSO for 42 channels CENELEC
> 64 dB
CTB for 42 channels CENELEC
> 67 dB
Test socket
- 20 dB
Optical parameters
Laser type
cooled isolated
DFB laser
Wavelength
1310 nm ± 20 nm
Optical output power
10 mW (10 dBm)
NMS functions
Monitoring
Laser bias
Laser temperature
Laser output
power
Level adjustment
Tec-Strom
RF power at laser
Generals
Housing
Connectors
PAGE 168
Zinc die-cast
RF
F-type
optical
E 2000 APC
Dimensions
30x260x200 mm
Operating temperature
-10°C...+50°C
Storage temperature
-25°C...+75°C
Max. humidity, non condensing
95%
Packing unit
1 piece,
4.6 dm³, 2.2 kg
EMC
CE, Class A
FIBER LINE optical transmitters
LT 54 1600
DFB laser module
- Optical transmitter for WISI TOPLINE HEADEND
- Input frequency range 5-862 MHz
- Wavelength 1310 nm
- NMS via Headend controller OV 51S or
remote interface OV 52
- LASER CLASS 1 M
RF parameters
Input frequency range
5-862 MHz
Input level (42 channels)
88 dBµV ± 4 dB
Level adjustment
10 dB
C/N for 42 channels, opt. attenuation=12 dB
> 53 dB
CSO for 42 channels CENELEC
> 64 dB
CTB for 42 channels CENELEC
> 67 dB
Test socket
- 20 dB
Optical parameters
Laser type
cooled isolated
DFB laser
Wavelength
1310 nm ± 20 nm
Optical output power
16 mW (12 dBm)
NMS functions
Monitoring
Laser bias
Laser temperature
Laser output
power
Level adjustable
Tec-Strom
RF power at laser
Generals
Housing
Connector
Zinc die-cast
RF
F-type
optical
E 2000 APC
Dimensions
30x260x200 mm
Operating temperature
-10°C...+50°C
Storage temperature
-25°C...+75°C
Max. humidity, non condensing
95%
Packing unit
1 piece, 4.6 dm³,
2.2 kg
EMC
CE, Class A
PAGE 169
FIBER LINE optical transmitters
LT 61
Optical transmitter
- 4 dBm DFB-Lasermodule for TOPLINE HEADEND
- Frequency range CATV 45-862 MHz, SAT 950-2200 MHz
- Wavelength 1290-1310 nm
- SAT-ZF and CATV via one Fiber
- Dual band (CATV and SAT-IF) or
Single band (CATV or SAT-IF)
- NMS via Headend controller OV 51S or
remote interface OV 52
- Laser Class 1
Laser type
DFB Laser
uncooled
Input frequency 1
CATV
45-862 MHz
Input frequency 2
SAT
950-2200 MHz
Input level 42 ch.
CATV
88 dBµV ±4 dB
Input level 40 ch.
SAT
79 dBµV ±4 dB
Dual band
CATV and SAT-IF
Single band
CATV or SAT-IF
Test socket
-20 dB
Single band CATV
C/N for 42 ch. opt. link 4 dB
>50 dB
CSO/CTB 42 ch. CENELEC
>60 dB
Single band SAT IF
C/N for 40 SAT ch. opt. link 4 dB
>37 dB
Dual band
C/N for CATV 42 ch. opt. link 4 dB
>49 dB
C/N for SAT 40 ch. opt. link 4 dB
>27 dB
EMC
CE
FIBER LINE plus
FIBER LINE plus
FIBER LINE plus - Catalogue
Please ask for our catalogue "FIBER LINE plus"!
Professional fiber optical equipment for
large scale networks.
PAGE 170
Optical nodes - COMPACT LINE
LR 43
Redundant optical node, local feeding
- Redundant Node with three active outputs
- Integrated splice box
- Plug in RX and TX modules
- All settings via OK41A handset
or via NMS system
- NMS interface VT 51
- Electronic upstream configuration (redundancy / clustering)
- ICS for every coax line
- AGC based on optical input level
or via pilot carrier with VX58
Downstream
incl. one receiver module
Wavelength
LR 40
1290-1600 nm
Fiber
single mode 9/125 µm
Optical connector
E 2000 / APC
Frequency range
47-862 MHz
Optical input power
for controlled -5...+3 dBm
opt. output
level
Controlled output level
87-102 dBµV
IMR CTB, CSO
64 dB
Out 1
102 dBµV, 6 dB
slope
IMR CTB, CSO
60 dB
Out 1 + 2
114 dBµV, 6 dB
slope
Equalizer
0-15 dB
RF test points
-20 dB
Upstream
Wavelength
Optical upst­
ream trans­
mitter
FP Laser
LT 40
1310 ± 40 nm
DFB Laser
LT 41
1310 ± 20 nm
LT 45 1510
1510 ± 3 nm
LT 45 1530
1530 ± 3 nm
LT 45 1550
1550 ± 3 nm
LT 45 1570
1570 ± 3 nm
Optical output power
3 dBm
Frequency range
10-(30)65 MHz
Broadband RF-input
106 dBµV = 5% OMI
Nominal input level
OMI control range
10-300 MHz
75 dBµV
@ 75 dBµV input
Test point
3-10%
-20 dB
Pilot frequencies
LT 40 / LT 41 6.5 MHz
1310
LT 45 1510
6.6 MHz
LT 45 1530
6.8 MHz
LT 45 1550
7.0 MHz
LT 45 1570
7.2 MHz
General
RF connectors
PG 11
Operating voltage
180-265 VAC
Operating temperature
-20°C...+55°C
Power consumption
typ.
incl. 1xLR 40, < 45 W
1xLT 41
max.
incl. 2xLR 40, 53 W
2xLT 41, VT
51
PAGE 171
Optical nodes - COMPACT LINE
LR 43
Redundant optical node, local feeding
Protection class
IP 66
Dimensions
288x125x302 mm
EMC
CE, Class A
Downstream
Monitoring
Optical input power
Attenuator setting
Equalizer out 1,2,3 setting
Redundancy switch position
Receiver configuration
Pilot level
Configuration
Attenuation out 1, 2, 3
0-15 dB
Equalizer out 1, 2, 3
0-15 dB
Redundancy mode
auto / manual
Redundancy switch
position
Rec. 1 / Rec. 2
AGC control
on / off
Alarm / warning thresholds
Upstream
Monitoring
Optical output power
Temperature
Transmitter configuration
Redundancy / clustering switch position
ICS position
Reference pilot frequency
Configuration
Laser
on / off
OMI
3-8%
ICS1, ICS2, ICS3
0 / 8 / >45 dB
Redundancy / clustering switch position
Alarm / warning thresholds
Alarms / Warnings
Optical input power too high / too low
Optical transmitting power too high / too
low
Temperature too high / too low
AGC range limit
Pilot level too high / too low
PAGE 172
Optical nodes - COMPACT LINE
LR 63
Redundant optical Node, remote feeding
- Redundand Node with three active outputs
- Integrated splice box
- Plug in RX and TX modules
- All settings via OK41A handset
or via NMSystem
- NMS interface VT 51
- Electronic upstream configuration (redundancy / clustering)
- ICS for every coax line
- AGC based on optical input level or
via pilot carrier with VX58
Downstream
incl. one receiver module
Wavelength
1290-1600 nm
Fiber
single mode 9/125 µm
Optical connector
E 2000 / APC
Frequency range
47-862 MHz
Optical input power
for controlled optical
output level
-5...+3 dBm
IMR CTB/CSO
64 dB
Out 1
102 dBµV, 6 dB
slope
IMR CTB/CSO
60 dB
Out 2 + 3
114 dBµV, 6 dB
slope
Controlled output level
Equalizer
0-15 dB
RF test points
-20 dB
Upstream
Wavelength
Optical upst­
ream trans­
mitter
FP Laser
LT 40
1310 ± 40 nm
DFB Laser
LT 41
1310 ± 20 nm
LT 45 1510
1510 ± 3 nm
LT 45 1530
1530 ± 3 nm
LT 45 1550
1550 ± 3 nm
LT 45 1570
1570 ± 3 nm
Optical output power
3 dBm
Frequency range
10-(30)65 MHz
Broadband RF-Input
106 dBµV = 5% OMI
Nominal input level
10-300 MHz
75 dBµV
OMI control range
@ 75 dBµV
input
ICS 1, 2, 3
3-10%
0 / 8 / >45 dB
Pilot frequencies
LT 40 / LT 41 6.5 MHz
1310
LT 45 1510
6.6 MHz
LT 45 1530
6.8 MHz
LT 45 1550
7.0 MHz
LT 45 1570
7.2 MHz
Generals
RF connectors
PG 11
Operating voltage
27-65 VAC
Operating temperature
-20°C...+55°C
Power consumption
incl.
max.
1xLR 40,
LT 41
< 45 W
53 W
PAGE 173
Optical nodes - COMPACT LINE
LR 63
Redundant optical Node, remote feeding
Protection class
IP 66
Dimensions
288x125x302 mm
EMC
CE, Class A
NMS, Handset-functions
Downstream
Optical input power
Attenuator setting
Equalizer out 1,2,3 setting
Redundancy switch position
Receiver configuration
Pilot level
Configuration
Attenuation 0-15 dB
out 1, 2, 3
Equalizer out 0-15 dB
1, 2, 3
Redundancy auto/manual
mode
Redundancy Rec. 1 / Rec.
switch position 2
AGC control
on/off
Alarm / warning thresholds
Upstream
Monitoring
Optical output power
Temperature
Transmitter configuration
Redundancy / Clustering switch position
ICS position
Reference pilot frequency
Configuration
Laser
on/off
OMI
3-8 %0/8/>45
dB
ICS1, ICS2,
ICS3
0/8/>45 dB
Redundancy / clustering switch position
Alarm / warning thresholds
Alarme / warning
Optical input power too high / too low
Optical transmitting power too high / too
low
Temperature too high / too low
AGC range limit
Pilot level too high / too low
PAGE 174
Accessories optical nodes COMPACT LINE
LR 40
Optical Receiver module
Wavelength
1290-1600 nm
Optical return loss
> 40 dB
Frequency range
10-862 MHz
Optical input power
-5dbm...+3dBm
Nominal output level
80 dBµV ±2 dB
Attenuator
LT 40
0 / 4/ 8 / 12 dB
Power consumption
<2W
Optical connector
E 2000 / APC
Optical Transceiver module, 1310 nm FP-Laser
Wavelength
1310 ±40nm
Broadband RF-input
10-300 MHz
Frequency range
LT 41
Step size
depending on 10-(30) 65 MHz
diplexfilter
Nominal input level
75dBµV
Setting range OMI
3-10% @75 dBµV
input
Step size
1 dB
Optical output power
3 dBm
Pilot frequency
6.5 MHz
Optical Transceiver module, 1310 nm DFB-Laser
Wavelength
1310 ± 20 nm
Broadband RF-input
10-300 MHz
Frequency range
depending on 10-(30) 65 MHz
diplexfilter
Nominal input level
75 dBµV
Setting range OMI
3-10% @75 dBµV
input
Step size
1 dB
Optical output power
3 dBm
Pilot-frequency
6.5 MHz
PAGE 175
Accessories optical nodes COMPACT LINE
LT 45 1510
LT 45 1530
Optical Transceiver module, 1510 nm CWDM
Wavelength
1510 ± 3 nm
Broadband RF- input
10-300 MHz
Frequency range
10-(30) 65 MHz
Nominal input level
75 dBµV
Setting range OMI
3-10% @ 75 dBµ
V
output
Step size
1 dB
Optical output power
3 dBm
Pilot frequency
6.6 MHz
Optical Transceiver module, 1530 nm CWDM
Wavelength
1530 ± 3 nm
Broadband RF-input
10-300 MHz
Frequency range
LT 45 1550
10 -(30) 65 MHz
Nominal input level
75 dBµV
Setting range OMI
3-10% @
75 dBµV input
Step size
1 dB
Optical output power
3 dBm
Pilot-frequency
6.8 MHz
Optical Transceiver module, 1550 nm CWDM
Wavelength
1550 ± 3 nm
Broadband RF-input
10-300 MHz
Frequency range
PAGE 176
depending on diplexfilter
depending on diplexfilter
10 -(30) 65 MHz
Nominal input level
75 dBµV
Setting range OMI
3-10% @
75 dBµV input
Step size
1 dB
Optical output power
3 dBm
Pilot-Frequency
7.0 MHz
Accessories optical nodes COMPACT LINE
LT 45 1570
Optical Transceiver module, 1570 nm CWDM
Wavelength
1570 ± 3 nm
Broadband RF-input
10-300 MHz
Frequency range
OK 41 A
depending on diplexfilter
10 -(30) 65 MHz
Nominal input level
75 dBµV
Setting range OMI
3-10% @
75 dBµV input
Step size
1 dB
Optical output power
3 dBm
Pilot-Frequency
7.2 MHz
Handset
Programming device with illuminated display, data memory and LED torch
VT 51
Packing unit
1 piece
1.25 dm³
Shipping unit
10 pieces
15 dm³, ca. 1
kg
HMS Transponder module
- For use in VX 5... Compact Line amplifier
and Fiber Nodes LR43/LR63
- Hardware compliant with SCTE HMS PHY. layer HMS-005R9
- Sortware compliant with SCTE HMS-MAX layer HMS-004R13
- Update capability over HMS RF layer
- Advanced and customizeable automatic channel
discovery
XC 40
Configuration-Module for installation in LR 43 / 63
necessary together with LT 40-45
XE 50 F 0300
Diplexfilter 30 MHz
Downstream-frequency
47 - 862 MHz
PAGE 177
Accessories optical nodes COMPACT LINE
XE 50 F 0650
Diplexfilter 65 MHz
Downstream-frequency
XS 40
85 - 862 MHz
Redundancy switch for installation in LR 43/63
Accessories Optical nodes ASC/ALSC module
VX 58
ASC / ALSC module 1-2 pilot signals
- ASC / ALSC module 1-2 pilot ton signals
- AGC only for LR 4x and LR 6x
- 1. Pilot frequency 287-862 MHz*
- 2. Pilot frequency 110-140 MHz*
*Specify pilot frequencies when ordering
Control range
47 MHz ± 0.9 dB
470 MHz ± 2.9 dB
ASC
606 MHz ± 3.4 dB
862 MHz ± 4 dB
Notes
PAGE 178
ALSC / AGC
47 - 862 MHz ± 4 dB
ASC / AGC
287-862 MHz 1. Pilot
frequency
range
ALSC
110-140 MHz 2. Pilot
frequency
range
Optical nodes - MINI NODE
LR 20
Mininode, local feeding
- Modular concept
- Cost efficient optical node for distribution networks
- Optical return transmitter modules LT20 / 21
- Integrated splicebox
- All functions controlled via microprocessor
- All settings via OK40 /41A
Downstream
Wavelength
1290-1600 nm
Transmission bandwidth
47-862 MHz
Controlled output level
slope 4 dB@ 862 MHz
95 dBµV
flat
80 dBµV
Optical input power
for constant electrical
output level
-5 dBm...+3 dBm
output level (42 TV channels)
slope 4 dB
95 dBµV
CSO 65 dB
CTB 68 dB
RF test socket
-20 dB
Generals
Operating voltage
230 VAC
Operating temperature
-20°C...+50°C
Dimensions
244x134x84 mm
Packing unit
1 piece
8.1 dm³, 2.1 kg
Notes
PAGE 179
Optical nodes - MINI NODE
LR 21
Mininode, remote feeding
- Modular concept
- Cost efficient optical node for distribution networks
- Optical upstream transmitter modules LT20 / 21
- Integrated splice box
- All functions controlled via microprocessor
- All settings via OK40 /41A
- LASER CLASS 1
Downstream
Wavelength
1290-1600 nm
Transmission bandwidth
47-862 MHz
Controlled output level
slope 4 dB@ 862 MHz
95 dBµV
flat
80 dBµV
Optical input power
for constant electrical
output level
-5...+3 dBm
Output level (42 TV channels)
slope 4 dB
95 dBµV
CSO 65 dB
CTB 68 dB
RF test socket
-20 dB
Generals
Operating voltage
27-65 VAC
Operating temperature
-20°C...+50°C
Dimensions
244x134x84 mm
Packing unit
Notes
PAGE 180
1 piece
8.1 dm³, 2.1 kg
Optical nodes - MINI NODE
LR 60
Mininode, CATV und SAT IF
- Compact splitband fibernode for CATV and SAT IF
on one fiber
- All settings with WISI handset OK 41 / OK 41A.
- Integrated splice box
- Separate outputs for CATV and SAT IF
- ALC for constant output level
- LASER CLASS 1
Wavelength
1290-1600 nm
CATV-Parameter
Frequency range
45-862 MHz
Controlled output level ALC
OMI=5% @ 862 MHz
4 dB slope
85 dBµV
CNR for 42 channels CENELEC
opt. Link=6 dB
≥48 dB
Optical input power
-5 dBm...+3 dBm
SAT IF-parameters
Frequency range
950-2200 MHz
NMS functions
Monitoring
Optical input level
roll-off
Configuration
Alarms
ALC mode CATV
auto/manual
ALC mode SAT-IF
auto/manual
roll-off CATV
0-20 dB
roll-off SAT IF
0-20 dB
Input level
Adjustable
too high/low alarm tresholds
Generals
Operating voltage
Packing unit
230 VAC
1 piece
8.1 dm³, 2.1 kg
Notes
PAGE 181
Accessories optical nodes - MINI NODE
LT 19
LT 20
LT 21 1510
LT 21 1530
LT 21 1550
LT 21 1570
OK 41 A
Optical upstream transmitter, FP laser
Wavelength
1270-1350 nm
Transmission bandwidth
10-65 MHz
RF -input 10-300 MHz
95 dBµV (OMI=5%)
Output power
3 dBm
Optical upstream transmitter, DFB laser
Wavelength
1290-1330 nm
Transmission bandwith
10-65 MHz
RF-input 10-300 MHz
95 dBµV (OMI=5%)
Output power
3 dBm
Optical returnpath transmitter, CWDM Laser
Wavelength
1510 nm ± 3 nm
Transmission bandwidth
10-65 MHz
RF-input 10-300 MHz
95 dBµV (OMI=5%)
Output power
3 dBm
Optical returnpath transmitter, CWDM Laser
Wavelength
1530 nm ± 3 nm
Transmittion bandwidth
10-65 MHz
RF-input 10-300 MHz
95 dBµV (OMI=5%)
Output power
3 dBm
Optical returnpath transmitter, DFB laser
Wavelength
1550 nm ± 3 nm
Transmission bandwidth
10-65 MHz
RF-input 10-300 MHz
95 dBµV (OMI=5%)
Output power
3 dBm
Optical returnpath transmitter, CWDM Laser
Wavelength
1570 nm ± 3 nm
Transmission bandwidth
10-65 MHz
RF- input 10-300 MHz
95 dBµV (OMI=5%)
Output power
3 dBm
Handset for all programmable
amplifiers and nodes
with memory, lightning display and LED torch
VT 21
Packing unit
1 piece, 1.25 dm³
Shipping unit
10 pieces, 15 dm³, ca. 1 kg
HMS Transponder
NMS settings and monitoring of temperature, optical Rx level, RF output level,
OMI, alarm. Operable only with LT 20/21.
PAGE 182
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising