HDMI Matrix 4 x 4 User manual Thank you for purchasing this

HDMI Matrix 4 x 4 User manual Thank you for purchasing this
HDMI Matrix 4 x 4
User
manual
Thank you
for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep
this manual for future reference.
I. Introduction
HDM-944 is a 4-by-4 DVI/HDMI matrix supporting output resolution up to 4Kx2K. It allows any source (Blue-Ray
player, HD DVD player, satellite receiver, game system, etc.) to be shown on any of four displays simultaneously, no
matter the source is HDCP encryption or not. Extra infrared receiver port is supplied for remote control. HDM-944
offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory,
data center control, information distribution, conference room presentation, school and corporate training
environments, etc.
II. Features
1. Supports display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
2. 3D HDMI 1.4a video format support.
3. 3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock.
4. Supports deep color up to 48-bit per pixel.
5. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
6. Supports reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to
192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.
7. Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.
8. Operates for TMDS clock frequencies up to 300MHz.
III. Package
HDMI Matrix --------------------------------------------------------- 1PCS
Adaptor ---------------------------------------------------------------- 1PCS
Operation Manual ---------------------------------------------------- 1PCS
Remote Controller------------------------------------------------------1PCS
IV. Specifications
1. Frequency Bandwidth
2. Input Ports
3. Output Ports
4. Power Supply
5. ESD Protection Human Body Model:
BesTrans | We Transfer Data Best
bestranstek.com
Version: V1
2.97Gbps
4 x HDMI Female input ports
4 x HDMI Female output ports
DC 12V, 2.5A
± 8kV (air-gap discharge)
Audio/ Video transmission
sales@bestranstek.com
Page: 1
± 4kV (contact discharge)
6. Dimensions (mm)
7. Weight(g)
8. Operating Temperature
9. Storage Temperature
10. Relative Humidity
11. Power Consumption (Max)
113(W) X 260 (D) X 26 (H)
750
0°C ~ 40°C / 32°F ~ 104°F
-20°C ~ 60°C / -4°F ~ 140°F
20 ~ 90% RH (Non-condensing)
20W
V. Operation Controls and Functions
Front Panel
1. ON/OFF: Power on/off switch.
2. POWER: This red LED illuminates when the device is connected with power supply.
3. IR IN: Remote control signal receive.
4. OUTPUT A: Press this button to select the input source to HDMI OUTPUT A, and these red LED illuminate when
the output select to the corresponding input.
5. OUTPUT B: Press this button to select the input source to HDMI OUTPUT B, and these red LED illuminate when
the output select to the corresponding input.
6. OUTPUT C: Press this button to select the input source to HDMI OUTPUT C, and these red LED illuminate when
the output select to the corresponding input.
7. OUTPUT D: Press this button to select the input source to HDMI OUTPUT D, and these red LED illuminate when
the output select to the corresponding input.
Rear Panel
1. INPUT PORTS:
LED1-4
illuminate
when the HDMI
signal plug in INPUT
1-4 port.
INPUT 1-4 ports are where you connect the HDMI source.
2. OUTPUT PORTS: LED A-D illuminate when the TV plug in OUTPUT A-D ports.
OUTPUT A-D ports are where you connect the HDTV or monitor with HDMI cable
3. RS232: This port can control the matrix via PC.
4. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.
Right Panel
1. EDID Selector: Select HDMI output signal format via EDID Selector.
BesTrans | We Transfer Data Best
bestranstek.com
Version: V1
Audio/ Video transmission
sales@bestranstek.com
Page: 2
Nomber
EDID Selector
Description
1
0000
Auto mode(default)
2
0001
1080I,Stereo Audio 2.0
3
0010
1080I,Dolby/DTS 5.1
4
0011
1080I,HD Audio 7.1
5
0100
1080P,Stereo Audio 2.0
6
0101
1080P,Dolby/DTS 5.1
7
0110
1080P,HD Audio 7.1
8
0111
3D,Stereo Audio 2.0
9
1000
3D,Dolby/DTS 5.1
10
1001
3D,HD Audio 7.1
11
1010
4K2K,Stereo Audio 2.0
12
1011
4K2K,Dolby/DTS 5.1
13
1100
4K2K,HD Audio 7.1
14
1101
1024x768 DVI
15
1110
1920x1080 DVI
16
1111
PC Software control mode
VI. Application Example
VII. Remote control
OUT A: Press 1\2\3\4 button will to select input source to HDMI OUT A, and the LED will
indicate the corresponding input source.
OUT B: Press 1\2\3\4 button to select input source to HDMI OUT B, and the LED will
indicate the corresponding input source.
OUT C: Press 1\2\3\4 button to select input source to HDMI OUT C, and the LED will
indicate the corresponding input source.
OUT D: Press 1\2\3\4 button to select input source to HDMI OUT D, and the LED will
indicate the corresponding input source.
VIII. Matrix controller user guide
Installation
Matrix controller is green software. Just use a cable to connect the PC via RS232 port and
copy “MatrixController.exe” to PC to complete installation.
BesTrans | We Transfer Data Best
bestranstek.com
Version: V1
Audio/ Video transmission
sales@bestranstek.com
Page: 3
Preparation
1. Connect PC and Matrix by RS232 cable (headers of both sides of cable should be FEMALE)
2. Power-up Matrix
3. Double click MatirxController.exe icon to run it
Introduction
“General” Page:
① Select RS232 COM port.
② Click to connect or disconnect PC and Matrix.
③ Click to refresh device status: device information will display in ⑤ area and show Input/Output settings.
④ To enable or disable Input/Output tags displaying when setting button on “Setting” page focused.
⑤ Device information display area.
⑥ Click to select page
⑦ Status bar:
﹥RS232 COM port connection
﹥Communication status
﹥Prompt of operation messages
﹥Time and Date
“Port Tag” page
BesTrans | We Transfer Data Best
bestranstek.com
Version: V1
Audio/ Video transmission
sales@bestranstek.com
Page: 4
① Input port tags.
② Click to edit Input port tags.
③ Output port tags.
④ Click to edit Output port tags.
﹥ Edit Input port tags:
After action of ②, edit form will pop-up as below:
Define tags for respective Input port, then devices connect the Input ports can be easily remembered.
Click buttons with “×” caption to delete tag which is no use any more, if tag is still used by any other Input port,
delete action will be invalid.
﹥ Edit Output port tags:
After action of ④, edit form will pop-up as below:
Define tags for respective Output port, then displays connect the Output ports can be easily remembered. Click
buttons with “×” caption to delete tag which is no use any more, if tag is still used by any other Output port,
delete action will be invalid.
“Setting” page
① LED display indicates number of corresponding Output port .
② Click to select Input port for respective Output port.
③ Click to select previous or next Input port for respective Output port.
④ Display Input to Output with tag information when mouse moves over ② buttons.
BesTrans | We Transfer Data Best
bestranstek.com
Version: V1
Audio/ Video transmission
sales@bestranstek.com
Page: 5
⑤ Pre-Setting items.
⑥ Click to edit selected pre-setting item.
⑦ Set selected pre-setting item to Matrix.
﹥ Edit selected pre-setting item
After action of ⑥, edit form will pop-up as below:
① Pre-Setting name
② Select Input for respective Output
③ Set all Output ports from same Input
“EDID control” page
① Set EDID mode for selected Input port or All Input ports, click “Set” button to complete action. “Auto EDID
mode” can only be set for “All Inputs”.
② Copy EDID from Output port to selected Input port or All Input ports, click “Copy” button to complete action.
③ Read EDID content from Output port and display in grid, click “Read” button to complete action.
④ Save EDID content which displayed in grid to binary file (file extension is “.bin”)
⑤ Open EDID binary file and display in grid
⑥ Download EDID content which displayed in grid to selected Input port or All Input ports, click
“Download” button to complete action.
⑦ EDID content displaying grid
BesTrans | We Transfer Data Best
bestranstek.com
Version: V1
Audio/ Video transmission
sales@bestranstek.com
Page: 6
⑧ Click to clear EDID content displayed in grid
“FW upgrade” page
① Click to load Firmware.
② Click to upgrade matrix firmware.
③ Firmware upgrade messages display area.
④ Click to clear Firmware upgrade messages.
BesTrans | We Transfer Data Best
bestranstek.com
Version: V1
Audio/ Video transmission
sales@bestranstek.com
Page: 7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising