Installation and Operation Guide

Installation and Operation Guide
™
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2008 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
Installation and
Operation Guide
What’s in the box
Setting up the subwoofer
Subwoofer (1) connects wirelessly to any railtones transmitter for the audio signal. The
transmitter is included in the railtones 2-speaker kit (sold separately).
The default setting for the subwoofer is Zone 1. To change the zone setting, first turn off
power to the subwoofer by unplugging the power adapter. The status light should be off.
Toggle the 3-position switch to select the zone that the transmitter is broadcasting on.
The subwoofer will automatically try to connect to the transmitter after it is plugged in.
Power Adapter (1) provides power to the subwoofer.
How the wireless system works
Multi-Zone Capability
The audio signal is transmitted wirelessly on any one of three zones available on the
transmitter. Refer to the instructions included with the railtones kit to set up the system.
After setting up the transmitter, the subwoofer must then be “tuned” to the signal zone
selected on the transmitter. A blue light will indicate if the subwoofer is receiving a signal
from the transmitter.
SUBWOOFER STATUS LIGHT
Connected to Transmitter
No Connection
Solid Blue
Solid Red
STATUS
LIGHT
REMOTE
SENSOR
Troubleshooting
Some speakers connect to the transmitter, but the subwoofer does not.
1. Make sure the subwoofer is set to the same zone as the transmitter.
2. Unplug the subwoofer and plug it back in.
3. Move the subwoofer closer to the transmitter.
The subwoofer will not play music, but it is connected to the transmitter.
Make sure the subwoofer is on, the volume is turned up, and it is not muted.
VOLUME
CONTROL
The remote control does not work.
1. Move closer to the subwoofer and aim the remote control directly at the remote sensor.
2. Replace the remote control’s battery.
ZONE
SWITCH
Refer to the instructions provided with the railtones system for more
troubleshooting options.
Important Notes
Location
Do not use the wireless transmitter near a microwave.
Do not install this system in a damp or wet location.
Interference
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Changes or modifications to the system not expressly approved by LBL Lighting
could void the user’s authority under FCC guidelines to operate the equipment.
POWER
ADAPTER
PLUG
front
Product Specifications
Speaker size: 4 inches
Amplifier output: 30 Watts maximum
Audio input: 2.4 GHz digital wireless signal
Signal Zones: 3
Range: up to 100 feet
Power input: 24 Volt DC
Cabinet size: 8.66 x 8.66 x 4.33 inches
back
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising