Untitled - Hills Limited

Untitled - Hills Limited
PLAYER MODULE
PLAYER MODULE
Controls and Functions
TABLE OF CONTENTS
No BlueTooth
13
14
Characteristics
0
Controls and Functions
1-5
10
11
12
9
8
COMPACT
DIGITAL VIDEO
LEVEL
MP3
USB
Remote Controller Controls and Functions
5-6
Battery installation of remote controller
7
Playing Audio Disc
8
Rear Panel Wiring Connection
9
REPEAT
EJECT
PLAY/PAUSE
PREV.
NEXT
REPEAT
STOP
F.BWD
F.FWD
3
4
5
6
ALL
POWER
COMPACT D ISC P LAYER
1
1
2
-
+
7
POWER: Press once to power on (lit LCD). Press again to power off (LCD
is off)
!2 LCD DISPLAY: Display CD status including track number and playing
time.
!
MP3 : M3 text appears when playing MP3.
!
CD
:〝
!
Characteristics
!
Slot loading drive.
!
Supports MP3 / WMA / CD / CDR / CDRW formats.
!
Supports USB 1.1 host interface.
!
Anti-shock electronically buffered skip protection.
!
Supports DC 12V power.
!
Reads CD and USB. It plays a later inserted media. For example, USB
tracks will be played once USB is inserted during CD playing.
!
Some models support and read Bluetooth connected (paired) wireless
Bluetooth-enable devices for music playback. PLAY/II、PRVE & NEXT can
1
〞Current track is playing;〝
〞current track is paused.
!
REPEAT 1
: Repeating current track.
!
REPEAT ALL
: Repeating all tracks.
!
REPEAT FOLDER : When showing〝REPEAT FOLDER〞on LCD, it means
replay the current folder. (This function only works
for the MP3 and other formats of CD disc containing
the folders)
!
RANDOM
!
AB
: When executing the RANDOM function, LCD shows
" D " and flashes as well.
: Repeat playing between A and B.
!
: Displaying Folders Numbers.
!
: LCD displays the total number of folders and tracks. LCD
shows the number of folder first and then specific number of
track.
!
: Displays elapse time.
be controlled via on-board buttons or remote control.
0
: CD text appears when playing CD.
PLAYER MODULE
3
PLAYER MODULE
Controls and Functions
REPEAT: Repeatedly play the single track or all of the tracks.
4
STOP: Stop CD disk playing.
5
F.BWD: Speed backward: If pressing
ONCE, it moves backward.
Offering the speed of 2-4-8-20 times, 4 kinds of multiples. When
pressing PLAY/PAUSE mode, it cancels the speed. Backward function
and then returns to the normal playing speed.
6
BlueTooth
13
14
F.FWD: Speed forward: If pressing
ONCE, it moves forward.
Offering the speed of 2-4-8-20 times, 4 kinds of multiples. When
pressing PLAY/PAUSE mode, it cancels the speed forward function
and then returns to the normal playing speed.
12
NEXT: Press NEXT once to forward to next track.
9
PREV: Press PREV once to reverse to previous track.
10
11
8
REPEAT
ALL
POWER
LEVEL: Volume level (rotating clockwise to increase volume ;
counterclockwise to reduce volume).
8
9
LEVEL
MP3
USB
1
PLAY/PAUSE: Play and Pause. Press button to start play. Press
button during play to suspends play. Press button during pause to
start play again.
-
REPEAT
COMPACT D ISC P LAYER
7
10
11
2
3
4
5
6
+
7
1
POWER: Press once to power on (lit LCD). Press again to power off (LCD
is off)
2
LCD DISPLAY: Display CD status including track number and playing
time.
EJECT: Pressing once, CD disc eject from the slot; pressing one more
time, CD disc will be taken into the slot.
!
MP3 : M3 text appears when playing MP3.
!
CD
: CD text appears when playing CD.
:〝
〞Current track is playing;〝
〞current track is paused.
Disk loading slot: Insert the audio disc (label side up) into the CD
loading slot gently. CD will be loaded automatically.
!
REPEAT 1
: Repeating current track.
13
USB Port (type A): Accepts USB mass-storage device.
!
REPEAT ALL
: Repeating all tracks.
14
Remote control port: Aim the remote controller towards this section to
enable remote operation.
!
REPEAT FOLDER : When showing〝REPEAT FOLDER〞on LCD, it means
replay the current folder. (This function only works
for the Mp3 and other formats of CD disc containing
the folders)
!
SHUFFLE
!
AB
12
!
2
3
: When executing the SHUFFLE function, LCD shows
" SHUFFLE " and flashes as well.
: Repeat playing between A and B.
!
: Displaying Folders Numbers.
!
: LCD displays the total number of folders and tracks. LCD
shows the number of folder first and then specific number of
track.
!
: Displays elapse time.
PLAYER MODULE
PLAYER MODULE
3
REPEAT: Repeatedly play the single track or all of the tracks.
11
4
STOP/EJECT: Press once to stop play. Press one more time to reject CD
disc.
SHUFFLE: Press for shuffle (random) track play or using remote control
for PREV (previous) & NEXT (next) track play.
12
PREV.: Previous track. Press & release for previous track. Press & hold to
fast rewind.
Disk loading slot: Insert the audio disc (label side up) into the CD
loading slot gently. CD will be loaded automatically.
13
USB Port (type A): Accepts USB mass-storage device.
14
Remote control port: Aim the remote controller towards this section to
enable remote operation.
5
6
NEXT: Next track. Press & release for next track. Press & hold to fast
forward.
7
LEVEL: Volume level (rotating clockwise to increase volume ;
counterclockwise to reduce volume).
8
CD\USB\BT: CD\USB\BT play options. (If CD & USB has no such function,
BT (Bluetooth) is the only option)
Bluetooth Using Instructions:
(1) Select BT from CD\USB\BT options from the music player. The word
“BLUE” is displaying and flashing intermittently on the LCD screen.
Remote Controller Controls and Functions
(2) Search Bluetooth devices, like a smartphones or tablets or MP3
players, for the music player's ID. The device ID is the word 'BLUE'.
Click on the device ID.
(3) Enter "0000" when you're prompted to enter a PIN number. This will
cause your wireless device to pair with the music player.
k Numeral 0~9
(4) Once paired and connection is made successfully, the word 'BLUE'
stops flashing and becomes still.
(5) The Bluetooth Music Player is now connected and established. Ready to
play music.
3
4
5
6
7
8
9
a ON/OFF
MODE
b Source
c Confirmation
d Stop
l Folder
0
Note: Effective range of up to 5 meters (15 feet) line-of-sight during
typical connection and music playing. If the connection is out of
range and/or signal lost for more than 10 seconds due to something
blocking the Bluetooth signal, connection may need to be
reestablished by following the directions above.
10
2
SOURCE
(6) Bluetooth functions can be controlled by using the remote control by
pressing PLAY/PAUSE, PREV & NEXT buttons.
9
1
e Play/Pause
FOLDER
m Speedy Forward
f Last
n Speedy Backward
g Next
h Random
o Pinpoint Repeat
A-B
RAN
REP
LO
NOR
HI
i Repeat
FOLDER: Press for next folder.
PLAY/PAUSE: Play and Pause. Press button to start play. Press button
during play to suspends play. Press button during pause to start play
again.
PITCH
4
5
j PITCH speed
PLAYER MODULE
PLAYER MODULE
a
ON/OFF: Load and Eject Disk.
Battery installation of remote controller
b
MODE: Mode selection. CD→USB→BT options. CD\USB\BT play options. (If
CD & USB has no such function, BT (Bluetooth) is the only option)
!
Locate the battery compartment on the bottom of the remote control.
!
Press and hold tenon and then slide out the battery tray.
c
Confirmation button: Press for confirmation to any remote command.
!
d
Stop: Stop playing.
Remove the old battery and insert the new battery in, making sure that
the battery's positive (+) side is facing up.
e
Play/Pause: Play and pause playing disk.
!
Slide the battery tray back into the remote control until it clicks.
f
Last: Skip to the former track.
g
Next: To next track.
h
Random: Random play. Press
playing tracks at random.
i
Repeat: Repeated play on each mode.
!
!
RAN
, then using
or
, then choose the
CD formats in this CD player unit: When playing music, pressing
REPEAT once, then LCD displays "REPEAT 1". It refers to replay the
present track. Press REPEAT twice, LCD then shows "REPEAT ALL", it
means to replay the whole available tracks. Pressing REPEAT three
times, LCD displays “CANCEL”, and it refers to cancel the repeat
function.
(1)
Press
and hold
the tenon
MP3 and CD disc which meets the required formats in this CD
player unit: When playing music, pressing REPEAT once, then LCD
displays "REPEAT 1". It refers to replay the present track. Press REPEAT
twice, LCD then shows "REPEAT ". It refers to play all tracks within the
current folder. If pressing REPEAT three times, LCD shows "REPEAT
ALL", it means to replay the whole available tracks. Pressing REPEAT
four times, LCD displays “CANCEL”, and it refers to cancel the repeat
function.
j
PITCH speed: Allow track to increase HI or decrease LO speed. Speed can
be adjusted in 6 different steps. NOR Denotes normal speed.
k
Numeral 0~9: Select numerals.
l
Folder: Repeat folder. When pressing the FOLDER each time, it will be
changed into next folder number.
m
Speed forward: Press
once to activate speed forward.
Press
to resume normal play.
n
Speed backward: Press
once to activate speed backward.
Press
to resume normal play.
o
Pinpoint Repeat: Pinpoint repeat playing between A and B.
6
(2)
Pull out
CR 2025
CR 2025
CR 2025
CR 2025
(3)
Place the
battery
(''+'' faces
upwards)
(4) Push the
compartment
back
* * Note :
The effective transmission range is 3~5 meters. Use only CR2025 3V
lithium battery.
7
PLAYER MODULE
PLAYER MODULE
Playing Audio Disc
Rear Panel Wiring Connection
1. This player can accepts like WMA, CD, CD-R, CD-RW , MP3 disks and USB
reader playing.
(2-Wire)
2
1
2. Insert a disc into disc slot with the playback side down and playback starts
automatically. Track number and playing time will be displayed.
3. Press PREV, NEXT on front display panel or
on the remote
controller, for desired next or previous track number.
4. Press PLAY/PAUSE and
on the remote controller, for users to begin to
play and pause the track.
5. Press STOP on front display panel or
to stop the playing track.
on the remote controller, for users
6. Press EJECT on front display panel or
on the remote controller, for users
to have the CD disc ejected; if pressing one more time, the CD disc will be
taken into the slot.
7. Button
and
backward.
on the remote controller are for users to speed forward or
8. To select the various folders in MP3 format, it can be done by pressing FOLDER
on the remote controller to choose the desired folder. Then combined the
respective number buttons to form the playing track within the desired
folder.
1
Power input
2
Audio Output Connector Balanced
(1-Wire)
9. Two optoins for the order of playing music
!
Copy the desired songs into USB storage unit one by one until copying all the
desired songs. By this way, the play sequency will be based upon the order of
music being programed into USB storage unit.
!
If the desired songs will be divided into different folders, please number the
songs when copying them into folders then copying the said folders into USB
storage unit. Pleae note the songs must be numbered by the same digit like 00,
01, 02 or 000, 001, 002 or 0000, 0001, 0002... and so on.
!
Format USB before playback. Format standard is FAT.
1
* * Note :
When inserts the disk into CD player or takes out the disk, it is necessary
to let CD player insert disk and return automatically. It is prohibited to
push or take out the disk by hand before the disk completely return from
CD player, thus will cause the machine to be broken down and unable to
operate normally.
8
1
9
Power input and Audio output
PLAYER MODULE
PLAYER MODULE
& IC - ID
CAUTION AVIS
THIS DEVICE COMPLIES WITH PART15 OF THE FCC RULES AND RSS-123 ISSUE2 OF
CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOCS ELECTRIQUES
NE PAS OUVRIR
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device. This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
“This product can only be used at the area that the altitude is lower than 2000m for
safety purpose.”
ATTENTION: POUR EVITER LES RISQUES DE CHOCS
ELECTRIQUES, NE PAS ENLEVER LE COUVERCLE. AUCUN
ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER. CONFIER
L'ENTRETIEN AU PERSONNEL QUALIFIE.
AVIS: POUR EVITER LES RISQUES D'INCENDIE OU
D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE
A LA PLUIE OU A L'HUMIDITE
“This product can be used in non-tropical locations only for safety purpose.”
Disposal Dispose of any unusable devices or batteries responsibly and in accordance
with any applicable regulations.
Disposing of used batteries with domestic waste is to be avoided!
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure, that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
2005-08-13
Le symbole eclair avec point de fleche a l'interieur d'un triangle equilateral est
utillise pour alerter l'utilisateur de la presence a l'interieur du coffret de "voltage
dangereux" non isole d'ampleur suffisante pour constituer un risque
d'electrocution.
Batteries / NiCad cells often contain heavy metals such as cadmium(Cd),
mercury(Hg) and lead(Pb) that makes them unsuitable for disposal with
domestic waste. You may return spent batteries/ accumulators free of
charge to recycling centres or anywhere else batteries/accumulators are
sold.
By doing so, you contribute to the conservation of our environment!
The exclamation point within an equilateral triangle is intended to alert the user
of the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Le point d'exclamation a l'interieur d'un triangle equilateral est employe pour
alerter les utillsateurs de la presence d'instructions importantes pour le
fonctionnement ett l'entretien (service) dans le livret d'instruction accompagnant
l'appareil.
* * Note :
Specifications and design subject to modification without notice due to
improvements in technology.
10
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising