MR 16 RGB LED LAMP

MR 16 RGB LED LAMP
MR 16 RGB LED LAMP
Datasheet
User’s manual
V.1.00
ENG
MR16 RGB Spot lenses (Code 0505L004)
MR16 RGB Medium flood lenses (Code 0505L005)
MR16 RGB Wide flood lenses (Code 0505L006)
2
MR 16 RGB LED LAMP
IMPORTANT SAFETY INFORMATION
Fire prevention:
Never locate the fixture on any flammable surface.
Minimum distance from flammable materials: 10 cm
Prevention from electric shock:
The unit should never be located in position exposed to rain or in areas of extreme humidity.
Safety:
The external surface of the unit may exceed 50°C, never handle the unit until at least 5 minutes
have elapsed since the unit was turned off.
Never install the unit in an enclosed area lacking sufficient air flow.
The ambient temperature should not exceed 40°C and should not be lower than -10°C.
Never touch the LEDs with hands, perfomance loss can occour.
DESCRIPTION
The MR16 RGB features three 1W LEDs (1 red, 1 green, 1 blue) and can be utilized
as a RGB colour changer, using the D.T.S. power supply / DMX-512 LED driver;
1 single power supply / DMX-512 LED driver can manage up to 12 MR16 RGB lamps.
Connecting the LED lamps to the driver is fast and easy, thanks to the dedicated
T-BOX RJ12 connection system.
The MR16 RGB connected to the D.T.S. power supply / DMX-512 LED driver can be
controlled either via an optional infra-red remote control, a recessed wall controller,
or any DMX lighting console.
APPLICATIONS
Cinemas - Restaurants and pubs - Discoteques - Architectural - Interiors and Exteriors.
3
MR 16 RGB LED LAMP
ASSEMBLING PROCEDURE
Place a drop of silicone or other synthetic glue in the 3 holes to fix the LED module to the
dedicated D.T.S. lenses.
Never touch the LEDs with hands
Silicone or synthetic glue
WIRING DIAGRAM
MR 16 RGB LED lamp is provided with a RJ12 connector
Pin 1
6 1
Pin 1 = RED +
Pin 2 = RED Pin 3 = GREEN +
Pin 4 = GREEN Pin 5 = BLUE +
Pin 6 = BLUE -
6-pin Female (RJ12)
RJ12 : 6P6C
6-pin Male (RJ12)
Modular Plug
6P6C indicates 6 positions 6 cables
1 2 34 5 6
MR16 RGB LED cabling connection can be done with a standard UTP TIA/EIA 568-A category 3
cable.
The maximum distance between power supply and the last MR16 lamp in the line should not
exceed 100 meters.
For short distance connections (less than 20 meters), you can also use a standard 6 conductors
telephone flat cable
MR 16 RGB LED LAMP
4
WIRING CONNECTIONS
D.T.S. MR 16 RGB LED Power supply
Code 03.LA002
D.T.S. T-BOX
6 1
CODE 03.LA001
B
R
1
T BOX
INPUT OUT 2
OUT 1
G
6-pin Female (RJ12)
INPUT
OUT 2
OUT 1
B
R
2
T BOX
INPUT OUT 2
OUT 1
G
IMPORTANT:
The minimum number of MR16 RGB 3W LED lamps
connectable to the D.T.S. Power supply is 3 pcs.
The maximum number of MR16 RGB 3W LED lamps
connectable to the D.T.S. Power supply is 12 pcs.
B
R
Pin 1
T BOX
3
INPUT OUT 2
OUT 1
G
Never plug the cable coming from the Power supply
into OUT 1 or OUT 2 of the T-BOX when other MR16
lamps are connected, because a wrong connection
can seriously damage the lamps.
Never plug in a new MR16 lamp when the power
supply is turned on.
B
R
12
G
MR 16 RGB LED LAMP
5
WIRING CONNECTIONS
D.T.S. MR 16 RGB LED Power supply
IMPORTANT:
circuit board
The minimum number of MR16 RGB 3W LED lamps
connectable to the D.T.S. Power supply is 3 pcs.
The maximum number of MR16 RGB 3W LED lamps
connectable to the D.T.S. Power supply is 12 pcs.
Never plug the cable coming from the Power supply
into OUT 1 or OUT 2 of the T-BOX when other MR16
lamps are connected, because a wrong connection
can seriously damage the lamps.
Never plug in a new MR16 lamp when the power
supply is turned on.
LEDS OUTPUT
R+ R- G+ G- B+ B-
Pin 1 = RED +
Pin 2 = RED Pin 3 = GREEN +
Pin 4 = GREEN Pin 5 = BLUE +
Pin 6 = BLUE -
6 1
BLUE +
BLUE BLUE +
BLUE BLUE +
BLUE -
RED +
GREEN +
GREEN -
RED -
RED +
GREEN +
GREEN -
B
RED -
RED +
GREEN +
G
B
R
RED -
G
GREEN -
R
4
B
G
R
G
RED +
B
B
R
R
G
R
B
RED -
BLUE +
GREEN +
5
RED +
BLUE -
GREEN -
RED -
BLUE +
GREEN +
12
RED +
BLUE -
GREEN -
RED -
BLUE +
3
GREEN +
2
BLUE -
1
6-pin Female (RJ12)
GREEN -
G
Pin 1
6
Note
MR 16 RGB LED LAMP
7
Note
MR 16 RGB LED LAMP
The information contained in this publication has been carefully prepared and checked.
However, no responsibility will be taken for any errors. All rights are reserved and this document
cannot be copied, photocopied or reproduced, in part or completely, without prior written consent
from D.T.S.
D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its
products without prior notice. D.T.S. assumes no responsibility for the use or application of the
products or circuits described herein.
MADE IN ITALY
D.T.S. Illuminazione s.r.l - Via Fagnano Selve 10-12-14 47843 - Misano Adriatico (RN) Italy
Tel. +39 0541 611131 Fax +39 0541 611111
info@dts-lighting.it www.dts-lighting.it
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising