pulse pattern generators/error detectors mp1632c

pulse pattern generators/error detectors mp1632c
PULSE PATTERN GENERATORS/ERROR DETECTORS
DIGITAL DATA ANALYZER
GPIB
OPTION
MP1632C
50 MHz to 3.2 GHz
2
For Development, Manufacturing and Inspection of Transmission Systems, Optical Modules and Logic Devices
Core networks and computer networks are increasing rapidly as the
volume of data transmitted in this multimedia data is growing. In addition to the STM-16/OC-48 (2.488 Gbit/s), Fibre channel, Giga-bit
Ethernet, etc. are being commercialized. Compact and high performance digital data analyzer are required for inspecting products like
digital transmission systems, optical modules, and logic devices.
The MP1632C realizes a compact solution that incorporates former
measuring equipment (MP1652A Pulse Pattern Generator and
MP1653A Error Detector) into a case.
MX163201A TEXT to MP1632A/C Pattern Conversion Software,
MX163202A MP165X to MP1632A/C Pattern Conversion Software,
MX163205A Q and Eye Analysis Software, and MX163206A SDH/
SONET Pattern Editor are available as application software.
Features
• 3.2 Gb/s PPG and ED in a case
• Eye diagram measurement and burst signal measurement supported
Performance and functions
• Easy operation
The MP1632C has a large, color LCD with touch screen. Microsoft
Windows ® operating system version 3.1 displays measurement results graphically. Customized screens enable one-key and one-parameter operation.
• High-quality pulse pattern generator
Programmable patterns of 8 Mbit max, PRBS patterns [(27 – 1) to
(231 – 1) with variable mark ratio], and zero substitution patterns can
be generated. Variable cross-point of data output waveform is also
supported.
DATA
Clock
H: 100 ps/div, V: 1 V/div
MU163220C output waveform (3.2 GHz)
• Error detector with many functions
High input sensitivity (25 mVp-p∗) and wide phase margin (250 ps∗)
performance is provided. The autosearch function enables PRBS
pattern search with usual phase and threshold search. Insertion error and omission error can be measured simultaneously.
∗Typical values at 3 Gb/s, PRBS 223 – 1
• Internal synthesizer with high signal purity (Option)
Highly pure signals, SSB phase noise characteristics of –85 dBc/Hz
or less (10 kHz offset), is generated.
• Support of various applications
The MP1632C supports testing of SDH/SONET (STM-0, 1, 4, 16/
OC-1, 3, 12, 48) devices and modules, research and development on
WDM components, Fibre channels, Giga-bit Ethernet, evaluation of
E/O and O/E module, GaAs IC, and high-speed ASIC/FPGAs
http://www.anritsu.com
123
PULSE PATTERN GENERATORS/ERROR DETECTORS
Specifications
• MU163220C 3.2G Pulse Pattern Generator
Operating frequency
10 MHz to 3.2 GHz (50 MHz to 3.2 GHz when using MP1632C-03 3.2G Internal Synthesizer)
External clock input
0.5 to 2 Vp-p (<0.5 GHz: square wave, ≥0.5 GHz: square wave or sine wave, 50% duty cycle)
Generation pattern
Pseudo random pattern (PRBS)
Pattern length: 2 n – 1 (n: 7, 9, 11, 15, 20, 23, 31)
Mark ratio: 1/2, 1/4, 1/8, 0/8, 1/2, 3/4, 7/8, 8/8
AND bit shift upon mark ratio setting: 1, 3 bits
Data pattern
Data length: 2 to 8,338,608 bits
Zero substitution pattern
Continuous 0 bit length: 1 to (pattern length – 1) bits
Pattern length: 2 n (n: 7, 9, 11, 15)
Error insertion
Error ratio: 10–n (n: 3, 4, 5, 6, 7, 8, 9), single error
External error input: Provided
Data output
Number of outputs: 2 (DATA/DATA, independent)
Amplitude: 0.5 to 2 Vp-p (10 mV steps, setting error: ±15% or ±0.1 V, whichever is greater)
Offset voltage
VOH: –2 to +2 V (at 2 Vp-p amplitude), –3.5 to +2 V (at 0.5 Vp-p amplitude)
(5 mV steps, setting error: ±15% of offset voltage, ±0.1 V or ±15% of amplitude, whichever is the greatest)
Display: VOH, VTH, and VOL selectable
Rise/fall time: ≤80 ps (10% to 90% of amplitude)
Pattern jitter: ≤30 psp-p
Waveform distortion: 10% or 0.1 V of amplitude, whichever is greater
Load impedance: 50 Ω (with back termination)
Connector: SMA
DATA/DATA tracking: DATA amplitude and offset voltage can be set to same value as DATA.
Crosspoint adjustment function: Provided
Clock output
Number of output: 2 (CLOCK/CLOCK, independent)
Amplitude: 0.5 to 2 Vp-p (10 mV steps, setting error: ±15% or ±0.1 V, whichever is greater)
Offset voltage
VOH : –2 to +2 V (at 2 Vp-p amplitude), –3.5 to +2 V (at 0.5 Vp-p amplitude)
(5 mV steps, setting error: ±15% of offset voltage, ±0.1 V or ±15% of amplitude, whichever is the greatest)
Display: VOH, VTH, and VOL selectable
Rise/fall time: ≤80 ps (10% to 90% of amplitude)
Load impedance: 50 Ω (with back termination)
Connector: SMA
Clock delay: –1 to +1 ns (2 ps steps)
External burst trigger input
Input level: 0/–1 V, connector: SMA
Internal burst signal
Burst cycle: 2 µs to 50 ms (1 µs steps), Enable length: 1 µs to 49.999 ms (1 µs steps)
Burst trigger output
Output level: 0/–1 V, connector: SMA
Sync signal output
Number of outputs: 1 (1/8 clock, variable pattern synchronization output selectable), Output level: 0/–1 V, Connector: SMA
Operating temperature
+5 to +45˚C
Power
≤200 VA
Dimensions and mass
232 (W) x 49 (H) x 449 (D) mm, ≤4.5 kg
• MU163240C 3.2G Error Detector
Operating frequency
10 MHz to 3.2 GHz (50 MHz to 3.2 GHz when using MP1632C-03 3.2G Internal Synthesizer)
Data input
Input waveform: NRZ
Input voltage: 0.5 to 4 Vp-p
Variable threshold voltage: –4 to +4 V (1 mV steps)
Termination: Connected to GND, –2 V or +3 V via 50 Ω
Connector: SMA
Clock input
Input waveform: Square wave (<0.5 GHz), square wave or sine wave (≥0.5 GHz), duty: 50%
Input amplitude: 0.5 to 4 Vp-p
Variable input delay: –1 to +1 ns (2 ps steps)
Polarity inversion: POS/NEG inversion selectable
Termination: Connected to GND, –2 V or +3 V via 50 Ω
Connector: SMA
Auto search function
Phase, threshold, phase & threshold, PRBS pattern (allowed if the mark ratio is between 1/8 and 7/8)
Receive pattern
Pseudo random pattern (PRBS)
Pattern length: 2 n – 1 (n: 7, 9, 11, 15, 20, 23, 31)
Marker ratio: 1/2, 1/4, 1/8, 0/8, 1/2, 3/4, 7/8, 8/8
AND bit shift upon mark ratio setting: 1, 3 bits
Data pattern
Data length: 2 to 8,338,608 bits
Zero substitution pattern
Continuous 0 bit length: 1 to (pattern length – 1) bits
Pattern length: 2 n (n: 7, 9, 11, 15)
Sync mode
Normal, frame
Sync threshold
AUTO or 10–n (n: 2, 3, 4, 5, 6, 7, 8)
Error detection mode
Omission, insertion, total
Continued on next page
124
For product ordering information, see pages 3 – 6
PULSE PATTERN GENERATORS/ERROR DETECTORS
Measurement items
Error rate: 0.0000 x 10–16 to 1.0000 x 100
Number of errors: 0 to 9.9999 x 1016
Error interval (async): 0 to 9999999 (Interval: 100 ms, 1 s)
Error free interval (EFI): 0.0000 to 100.0000%
Clock frequency: 0.01 to 3.2 GHz (resolution: 1 Hz, accuracy: 10 ppm ±1 kHz)
Eye margin measurement
function
Provided
Error performance
calculation function
Provided
Measurement channel mask
1 to 8 channels, each channel settable independently
Error output
Number of output: 1 (1/32 bit rate OR error), Output level: 0/–1, Connector: SMA
Sync signal output
Number of outputs: 1 (switchable among 1/8 clock, fixed pattern sync, sync gain output)
Output level: 0/–1 V, Connector: SMA
Burst trigger input
Input level: 0/–1 V, connector: SMA
Operating temperature
+5˚ to +45˚C
Power
≤250 VA
Dimensions and mass
232 (W) x 54 (H) x 449 (D) mm, ≤5 kg
2
• MP1632C (Main frame)
System environment
OS: Microsoft Windows ® operating system Version 3.1
Display: 10.4 inch, color LCD (touch screen), 640 x 480 dots, 256 colors
Printer: Parallel port for external printer (D-sub, 25-pins)
Keyboard: 101 type (English), PS/2 (mini DIN 6-pin connector)
Mouse: Serial, PS/2 (mini DIN, 6-pin connector)
FDD: 2 modes (1.44 MB, 740 KB)
HDD
C drive: ≥474 MB (used for system: measurement data, pattern), D drive: ≥30 MB (not accessible to users, interface: IDE)
Remote control
RS-232C (standard), GPIB (option): IEEE488.2, Ethernet (option): 10 Base-T
EMC
EN61326: 1997/A1: 1998 (Class A)
EN61000-3-2: 1995/A2: 1998 (Class A)
EN61326: 1997/A1: 1998 (Annex A)
LVD
EN61010-1: 1993/A2: 1995 (Installation Category II, Pollution degree 2)
Power supply
100 to 120 Vac/200 to 240 Vac, 47.5 to 63 Hz, ≤150 VA
Operating temperature
+5˚ to +45˚C
Dimensions and mass
426 (W) x 221.5 (H) x 451(D) mm, ≤20 kg
• 3.2G internal synthesizer (Option 03)
Frequency range
50 MHz to 3.2 GHz (1 kHz steps)
Frequency accuracy
±2 ppm
SSB phase noise
≤–85 dBc/Hz (10 kHz offset, 1 kHz bandwidth)
Non-harmonic spurious
≤–60 dBc (limited to spurious 10 kHz or more distant from carrier frequency)
Reference lock range
10 MHz ±10 ppm
Power
≤50 VA
Mass
≤5 kg
• MX163201A TEXT to MP1632A/C Pattern Conversion Software
Required system
Computer: IBM-PC/AT or full compatible, OS: Windows 3.1/95/98, CPU: Pentium 133 MHz or higher, Memory: 32 MB or more,
Hard disk space: 25 MB or more
Display
Resolution: 640 x 480 or more, Display colors: 256 or more
FDD: 3.5-inch (1.44 MB)
Text file
A text file describing the program pattern in hex format (maximum number of characters in a line: 32696 bits including spaces
and return characters)
MP1632A/C pattern data
file (PTN)
All the MP1632A/C set data and patterns (file format for reading/writing on the MP1632A/C main screen)
MP1632A/C pattern clip
file (PCP)
Only patterns (a file format that can be read or written in the MP1632A/C Pattern Editor)
• MX163202A MP165X to MP1632A/C Pattern Conversion Software
Required system
Computer: IBM-PC/AT or full compatible, OS: Windows 3.1/95/98, CPU: Pentium 133 MHz or higher, Memory: 32 MB or more,
Hard disk space: 25 MB or more
Display
Resolution: 640 x 480 or more, Display colors: 256 or more
FDD: 3.5-inch (1.2/1.44 MB)
Input file
MP165X program pattern files: MP165X’s reading/writing and edit
File name: T∗∗.PTN (for pulse pattern generator ), R∗∗.PTN (for error detector)
Output file
MP1632A/C pattern data file (PTN):
All the MP1632A/C set data and patterns (file format for reading/writing on the MP1632A/C main screen)
MP1632A/C pattern clip file (PCP): Only patterns (File format that can be read or written in the MP1632A/C’s pattern editor.)
Note: Since the FD format of MP165X is 1.2 MB, the PC must read 1.2 MB format FD.
http://www.anritsu.com
125
PULSE PATTERN GENERATORS/ERROR DETECTORS
• MX163205A Q and Eye Analysis Software
Required system
Computer: IBM-PC/AT or full compatible, OS: Windows 95/98/NT, CPU: Pentium 166 MHz or higher,
Memory: 64 MB or more, Hard disk space: 100 MB or more,
GPIB: National Instruments made GPIB interface (PCMCIA-GPIB or AT- GPIB/TNT series boards are recommended.)
Display
Resolution: 800 x 600 or more, Display colors: 256 or more
∗If two or more applications are running simultaneously, operation cannot be guaranteed.
Function
Measurement frequency: 1 to 3.2 GHz
Measurement patterns: PRGM, PRBS 7, 9, 11, 15, 20, 23, 31
Pattern format: Continuous/burst (To be synchronized within 1 s)
Eye margin measurement
Measurement resolution (threshold): 1 to 10 mV (1 mV steps), Measurement resolution (phase): 2 to 10 ps (2 ps steps),
Measurement rate: E-2 to E-15
Eye diagram measurement
Measurement resolution (phase): 2 to 10 ps (2 ps steps)
Measurement rate: E-2 to E-15 (actual measurement), E-3 to E-12 (estimate measurement)
Display rate: E-2 to E-15 (actual measurement), E-2 to E-4915 (estimate measurement)
Mask test judgment rate: E-2 to E-15
Q factor measurement
Measurement style: Multiple measurements at fixed phase/phase vs. Q factor measurements
Bit error rate range: Upper limit at E-3 to E-5, lower limit at E-7 to E-12
Minimum error count (measurement accuracy): 1, 10, 100, 1000
Vth shift width: Automatic, fixed (1 to 10 mV/1 mV steps)
• MX163206A SDH/SONET Pattern Editor
Required system
Computer: IBM-PC/AT or full compatible, CPU: Pentium 200 MHz or higher, OS: Windows 95/98/NT, Memory: 64 MB or more
Display
Resolution: 800 x 600 or more; Display colors: 256 or more
FDD: 3.5-inch (1.44 MB), Hard disk space: 100 MB or more,
GPIB: National Instruments made GPIB interface (PCMCIA-GPIB or AT-GPIB/TNT series boards are recommended.)
SDH/SONET pattern editor
Mapping: STM-N (N = 1, 4c, 12c, 16c), STS-N SPE (N = 1, 3c, 12c, 48c)
Pattern edit: Arbitrary editing of program patterns (PRBS pattern can be inserted in the payload.), time indication, table indication/edit
Payload:
Free format, ALL 0, ALL 1, PRBS 2n – 1 (n = 7, 9, 11, 15, 20, 20z, 23, 31) ∗Pattern repetition up to the length of all frames
CID pattern: Available
Frame repetition : Maximum 26 frames
Alarm addition:
Alarm addition conforming to SDH/SONET Standard
∗items: OOF/LOF, MS-AIS (L-AIS), MS-RDI (L-RDI), MS-REI (L-REI), HP-AIS (P-AIS), HP-REI (P-REI), HP-RDI (P-RDI)
BIP error addition: Generates parity errors of B1, B2, and B3
B1, B2, and B3 calculation: Available
Scramble: Available
BIP correction: Available
OH editor: Available
Functions
Windows is a registered trademark of Microsoft Corporation of the U.S. in the United States and other countries. IBM and AT are registered trademarks of
International Business Machines. Pentium is a registered trademark of Intel Corporation. PCMCIA-GPIB and AT-GPIB/TNT are registered trademarks of National
Instruments.
Ordering information
Please specify model/order number, name, and quantity when ordering.
Model/Order No.
Name
Model/Order No.
MP1632C
Main frame
Digital Data Analyzer
F0090
Z0319A
Z0320
Z0527
Z0528
Z0529
Z0396A
W1859AE
W1860AE
B0447B
B0329D
Standard accessories
Power cord (shielded):
Fuse, 8 A:
PS/2 mouse:
Input pen:
Recovery disk∗1:
Application disk∗1:
Remote sample disk∗1:
Pen holder:
MP1632C operation manual:
MP1632C remote control operation manual:
Dummy unit for EXTENSION:
Front cover:
MP1632C-01
MP1632C-02
MP1632C-03
Options
GPIB
Ethernet
3.2G internal synthesizer
MX163201A
MX163202A
MX163205A
MX163206A
Application software
TEXT to MP1632A/C Pattern Conversion Software
MP165X to MP1632A/C Pattern Conversion Software
Q and Eye Analysis Software
SDH/SONET Pattern Editor
1
2
1
1
1
1
1
1
1
1
1
1
pc
pcs
pc
pc
set
set
set
pc
copy
copy
pc
pc
∗1: Only for MP1632C customer
∗2: Units are factory options (not user replaceable)
∗3: Not supplied when 3.2G pulse pattern generator purchased as same time
126
For product ordering information, see pages 3 – 6
Z0321A
J0008
B0447A
B0447C
B0447D
Z0416
MB24B
B0348
B0329D
B0333D
J0905A
Z0398
W1529AE
Name
Peripherals
Keyboard (PS/2)
GPIB cable, 2 m
Dummy unit for CG
Dummy unit for PPG
Dummy unit for ED
3.5 inch head cleaning disk
Portable Test Rack (specified current: 20 A)
Soft case
Front cover
Rack mount kit
Semi-rigid cable (for Option 03)
Ethernet installation disk (for Option 02)
Ethernet operation manual (for Option 02)
MU163220C
3.2G Pulse Pattern Generator∗2
J0693A
J0696A
W1857AE
Z0306A
Standard accessories
Coaxial cord (HRM202B · 3D2W · HRM202B), 1 m:
Coaxial cord (AA-165-500), 0.5 m:
MU163220C/163240C operation manual:
Wrist strap:
MU163240C
3.2G Error Detector∗2
J0693A
J0696A
W1857AE
Standard accessories
Coaxial cord (HRM202B · 3D2W · HRM202B), 1 m: 1 pc
Coaxial cord (AA-165-500), 0.5 m:
2 pcs
MU163220C/163240C operation manual∗3:
1 copy
1
2
1
1
pc
pcs
copy
pc
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising