Sioux Chief 633-CG18FP Metal Head™ 18 x 3/4 in. Water Heater Connector Specification

Water Heater

Connectors

1

FuLL-sLip

2

Slide over.

Slide down and tighten.

• Faster

Pre-fabricated water heater connectors are perfect for new construction and repair/replacement installations

• easier

Buy water heater connectors in bulk or in kits. Sioux Chief offers cold, hot and expansion tank connection options

• superior

Build your own custom kit to fit your exact project requirements

Kits available for tankless water heaters and heating coil loop

Sioux Chief Water Heater Connectors

Sioux Chief Water Heater Connectors allow for fast and easy water heater installations for copper, PEX or CPVC piping systems. Contractors no longer need to pre-fab water heater connectors in the shop or field. Be sure to follow all local plumbing codes for water heater installation.

Copper System

Full-slip female sweat, full-slip compression

PEX System

PEX F1807, PEX F1960,

Viega PEX Press, PEX F2080

CPVC System

CPVC socket

2 Sioux Chief Manufacturing tel: 1-800-821-3944

Features

• Adjustable to different heights New heaters are never the same height as the old ones. Full-slip copper allows you to slide the connector onto the remaining copper supply, and then back down to the new height.

• No need for exact measurements Several inches of full-slip copper allows you to cut the copper to the approximate length. Even if you are too long on your cut, the full-slip allows you to slide the joint wherever it needs to be.

• Valve is already installed in connector

Soldering copper to copper is hard enough, but soldering to a valve is the toughest. It takes more heat than a normal solder joint, but too much heat will melt the seats and ruin the valve. Having the valve already soldered into the connector is more than just a time saver; it’s a valve saver.

• Holds everything in place for soldering

Connect the swivel nut to the heater nipple and fully tighten for a proper seal, prior to soldering to the copper tube. Everything will be in place for proper soldering. No more trying to hold loose copper elbows and tees together while soldering. The connector acts like a built-in soldering jig to hold everything.

• Professional Look Sioux Chief has THE

ONLY preformed connector on the market that is solid copper. When finished, the plumber has a professional, straight, sturdy installation.

FIP & MIP

Sioux Chief water heater connectors are available with

¾" and 1" MIP or FIP swivel connection. Each FIP swivel connection contains a thick rubber gasket for a tight seal and serves as a dielectric union.

Full-Slip Sweat & Compression

For copper systems, ½" or

¾" full-slip sweat or ⅞" O.D. compression connections are available.

Flex, Hard & Elbow

Sioux Chief offers flexible corrugated connectors and ¾" type-L in both straight and elbow water heater connectors for easy water heater installations.

Lengths

All connectors are available in a variety of lengths to meet

CPVC and PEX manufacturer installation instructions, IPC and

UPC model codes guidelines for electric and gas water heater installations.

600 WOG

Cold side connectors have 600

WOG full port ball valve.

Expansion Tank

Water heater connectors with a

¾" FIP branch for a two gallon expansion tank are available. in a top mount or side mount application.

fax: 1-800-758-5950 www.siouxchief.com

3

Tankless

Tankless water heater connectors available with ¾" sweat and FIP connections.

Kits or Bulk

Water heater connectors can be packaged in both bundled kits or in bulk.

Kits

• Convenient kits are great for new construction and repair/remodel job sites.

• Build your own pre-packaged water heater connector kit with the number system below.

• Kits are individually bagged and shipped 10 to a box.

C

B

A Cold Side Connector

B Hot Side Connector

C Dielectric Nipple Option

D Expansion Tank Option

D

C

A

Item No.

694-211123

694-211120

694X32012091

694X32012391

694X322123

694C33012091

694C331220

694C33012093

694C361520

694C36012092

694C36012094

694C33012391

Most Popular Kits

Components

SWEAT

¾" FIP swivel × ¾" full-slip FSWT

¾" FIP swivel × ¾" full-slip FSWT, ball valve

Two ¾" MIP × ¾" MIP dielectric nipples

¾" FIP swivel × ¾" full-slip FSWT

¾" FIP swivel × ¾" full-slip FSWT, ball valve

PEX

¾" FIP swivel × ¾" PEX barb

¾" FIP swivel × ¾" PEX barb elbow, with ball valve

¾" × ¾" FIP swivel with ¾" MIP branch


¾" FIP swivel × ¾" PEX barb elbow, with ball valve




¾" FIP swivel × ¾" PEX barb, with ball valve


CPVC

¾" FIP swivel × ¾" CPVC socket

¾" FIP swivel × ¾" CPVC socket elbow, ball valve



¾" FIP swivel × ¾" CPVC socket, ball valve




1" FIP swivel × ¾" CPVC socket

1" FIP swivel × ¾" CPVC socket, ball valve



1" × ¾" FIP swivel with ¾" MIP branch



1" × ¾" FIP swivel with ¾" MIP branch





Case

Qty

B

B

10 10

10 10

B 10 10

B 10 10

B 10 10

B

B

B

B

10 10

10 10

10 10

10 10

B 10 10

B 10 10

B 10 10

Component

Kit Code

Supply

System

694-

Description copper

Build Kit Item Numbers

A

Hot Side

Connector

21 straight

¾" MIP swivel

× ¾" full-slip

FSWT

B

Cold Side

Connector

01 elbow

¾" FIP swivel

× ¾" FSWT, ball valve

C

Nipple

Option

23 two ¾" MIP

× ¾" MIP

D

Expansion

Tank Option

91

¾" FIP swivel

× ¾" FIP swivel with ¾"

MIP branch

Packaging

Fee

$1.50

Water Heater

Connector Kit

694-A B C D

694-21 01 23 91

Completed Kit

Item Number

4

Packaging Codes || B: bulk

Sioux Chief Manufacturing tel: 1-800-821-3944

Copper

694- + A + B + C + D

Item No.

633-312

633-4312

633-312C

631-33F

633-212

A Hot Side Connector

Kit

Code

Description

21 ¾" FIP swivel × ¾" full-slip FSWT

22 1" FIP swivel × ¾" full-slip FSWT

23 ¾" FIP swivel × ⅞" compression

41 ¾" FIP swivel × ¾" FSWT elbow

81 ¾" FIP swivel × ½" full-slip FSWT

Length

12"

12"

12"

3" × 3"

12"

DO NOT use pipe dope or Teflon tape on FIP threads.

FIP connector nuts swivel

Kit Code 21

633-312

Kit Code 23

633-312C

Kit Code 41

631-33F

Kit Code 81

633-212

Item No.

631-305FP

633-312FP

633-4312FP

633-312CFP

633-212FP

633-318FPT

B Cold Side Connector

Kit

Code

Description

01 ¾" FIP swivel × ¾" FSWT elbow, ball valve

11 ¾" FIP swivel × ¾" full-slip FSWT, ball valve

12 1" FIP swivel × ¾" full-slip FSWT, ball valve

13 ¾" FIP swivel × ⅞" compression, ball valve

82 ¾" FIP swivel × ½" full-slip FSWT, ball valve

Length

3" × 5"

12"

12"

12"

12"

18"

Kit Code 11

633-312FP

Kit Code 13

633-312CFP

Kit Code 01

631-305FP

Kit Code 82

633-212FP

Kit Code 31

633-318FPT

Item No.

—

635-33

635-43

C Nipple Option

Kit

Code

20 No nipples

Description

23 Two ¾" MIP × ¾" MIP

24 Two 1" MIP × 1"MIP

Length

—

3"

3"


Item No.

—

633-3TM15

633-4TM15

633-3TM11

633-4TM11

Kit

Code

Description

— No expansion tank

91 ¾" × ¾" FIP swivel with ¾" MIP branch

92 1" × ¾" FIP swivel with ¾" MIP branch


94 1" × ¾" FIP swivel with ¾" MIP branch fax: 1-800-758-5950 www.siouxchief.com

Length

—

15"

15"

11"

11"

5

Kit Code 91

633-3TM15

Kit Code 93

633-3TM11



Kit Code 06

631X02

Kit Code 07

631X06

Kit Code 09

631XS

Kit Code 47

634W418

Kit Code 32

633X18

Kit Code 72

631WM0914E

Kit Code 01

631X02FP

Kit Code 25

633X18FPT

Kit Code 22

633X18FRV

Kit Code 21

633X18FP

Kit Code 41

634X418FP

Kit Code 81

631XM0914FPE

Kit Code 91

633-3TM15

Kit Code 93

633-3TM11

PEX

694X + A + B + C + D

A Hot Side Connection

Item No.

631X02

631X06

631XM

631XS

633X02

633X18

633X418

634X418

646X3

646X318

634V418

634W418

631WM0914E

631XM0914E

Kit

Code

Connection

06 ¾" PEX × ¾" FIP swivel elbow

07 ¾" PEX × ¾" FIP swivel elbow

08 ¾" PEX × ¾" MIP, elbow

09 ¾" PEX × ¾" FIP swivel s-bend

31 ¾" PEX × ¾" FIP swivel

32 ¾" PEX × ¾" FIP swivel

36 ¾" PEX × 1" FIP swivel

46 ¾" PEX × ¾" FIP swivel flexible

61 ¾" PEX × ¾" MIP

62 ¾" PEX × ¾" MIP

48 ¾" FIP × Viega PEX Press flexible

47 ¾" FIP × F1960 flexible

72 ¾" F1960 × ¾" MIP elbow with Square O

71 ¾" PEX × ¾" MIP elbow with Square O

Length

2½" × 4½"

6" × 6"

4" × 6"

6" × 4½"

2"

18"

18"

18"

—

18"

18"

18"

14" × 9"

14" × 9"

B Cold Side Connection

Item No.

631X02FP

633X18FP

633X18FPT

634X418FP

646X318FP

633X418FP

633X18FRV

Kit

Code

Connection

01 ¾" PEX × ¾" FIP swivel elbow, ball valve 2½" × 6"

21 ¾" PEX × ¾" FIP swivel, ball valve 18"

41 ¾" PEX × ¾" FIP swivel flexible, ball valve

51 ¾" PEX × ¾" MIP, ball valve

71 ¾" PEX × 1" FIP swivel, ball valve

634V418FP

634W418FP 42 ¾" FIP × F1960 flexible, ball valve

631WM0914FPE 84 ¾" F1960 × ¾" MIP elbow with Square O

631WM0914RFE 83 ¾" F1960 × ¾" MIP elbow with Square O

631XM0914FPE 81 ¾" PEX × ¾" MIP elbow with Square O

Length

18"

18"

18"

18"

18"

18"

18"

14" × 9"

14" × 9"

14" × 9"

Item No.

—

635-33

635-43

C Nipple Option

Kit

Code

Description

20 No nipples



Length

—

3"

3"

Item No.

—

633-3TM15

633-4TM15

633-3TM11

633-4TM11

6


Kit

Code

Description






Length

—

15"

15"

11"

11"

Sioux Chief Manufacturing tel: 1-800-821-3944

CPVC

694C + A + B + C + D

A Hot Side Connector

Item No.

631-C307

633-C02

633-C09

633-C18

633-C18M3

633-C24

633-C418

633-C424

634-C118

646-C3

646-C318

646-C324

646-C3418

646-C3424

Kit

Code

Connection

06 ¾" FIP swivel × ¾" CPVC socket elbow

31 ¾" FIP swivel × ¾" CPVC socket




36 1" FIP swivel × ¾" CPVC socket

37 1" FIP swivel × ¾" CPVC socket

56 ¾" FIP swivel × ¾" CPVC socket flexible

71 ¾" MIP × ¾" CPVC socket



74 1" MIP × ¾" CPVC socket

75 1" MIP × ¾" CPVC socket

B Cold Side Connector

Length

3" × 7"

3"

9"

18"

18"

24"

18"

24"

18"

3 ¼"

18"

24"

18"

24"

Item No.

Kit

Code

Connection

631-C307FP

633-C09FP

633-C18FP

633-C18FPM3 13 ¾" FIP swivel × ¾" CPVC socket, ball valve,

633-C24FP

633-C418FP

633-C424FP

14 ¾" FIP swivel × ¾" CPVC socket, ball valve

15 1" FIP swivel × ¾" CPVC socket, ball valve

16 1" FIP swivel × ¾" CPVC socket, ball valve

633-C18FRV



633-C18FPT

633-C418FRV

634-C118FP

646-C318FP

646-C324FP

646-C3418FP

646-C3424FP

646-C318FPT

61 ¾" MIP × ¾" CPVC socket, ball valve

63 ¾" MIP × ¾" CPVC socket, ball valve

64 1" MIP × ¾" CPVC socket, ball valve

65 1" MIP × ¾" CPVC socket, ball valve

Length

3" × 7"

9"

18"

18"

24"

18"

24"

18"

18"

18"

18"

18"

24"

18"

24"

18"

Item No.

—

635-33

635-43

C Nipple Option

Kit

Code

Description

20 No nipples




Item No.

—

633-3TM15

633-4TM15

633-3TM11

633-4TM11

Kit

Code

Description





94 1" × ¾" FIP swivel with ¾" MIP branch fax: 1-800-758-5950 www.siouxchief.com

Length

—

3"

3"

Length

—

15"

15"

11"

11"

7



Kit Code 06

631-C307

Kit Code 56

634-C118

Kit Code 34

633-C18M3

Kit Code 33

633-C18

Kit Code 32

633-C09

Kit Code 01

631-C307FP

Kit Code 12

633-C18FP

Kit Code 13

633-C18FPM3

Kit Code 51

634-C118FP

Kit Code 11

633-C09FP

Kit Code 17

633-C18FRV

Kit Code 21

633-C18FPT

Kit Code 91

633-3TM15

Kit Code 93

633-3TM11


Tankless Water Heater Connector Kit

Sweat & FIP Connections

• Fits most tankless water heaters.

• ¾" full port ball valves.

• Integrated all brass tee for pressure valve.

• ¼-turn drain valves for drainage/flushing.

• Pressure valve and installation instructions included.

• Max heater input: 500,000 BTU/HR per ASME

• Max pressure: 150 PSI

Item No.

Connection

690-0101 ¾" FIP swivel × ¾" sweat

690-2020 ¾" FIP swivel × ¾" FIP

B* 1

B* 1

Case

Qty

1

1

DO NOT use pipe dope on FIP threads

636-31308FK

636-C1307F2

DISTrIBuTED By

Heating Coil Loop Kit

Supply and Return Loop Connectors

• For use with high recovery hydronic systems. Preformed supply and return loop connectors provide easy installation

Component

Standard Kit

Check Valve

Kit

Sweat System

Supply Loop Elbow

¾" FIP swivel ×

¾" FSWT, full port ball valve

¾" FIP swivel ×

¾" FSWT, full port ball valve, with spring-loaded check valve

Return Loop Elbow

¾" FIP swivel ×


¾" FIP swivel ×


Dielectric Connector

Two

¾" MIP × ¾" MIP,

3" long

Two

¾" MIP × ¾" MIP,

3" long

Component

Standard Kit

Check Valve

Kit

CPVC System

Supply Loop

Elbow

¾" FIP swivel ×

¾" CPVC, full port ball valve

¾" FIP swivel ×

¾" CPVC, full port ball valve, with spring-loaded check valve

Return Loop

Elbow

¾" FIP swivel ×


Dielectric

Connector Boiler Drain

Two ¾" MIP

× ¾" MIP,

3" long

¾" FIP swivel ×


Two ¾" MIP

× ¾" MIP,

3" long

½" CPVC boiler drain

½" CPVC boiler drain

MIP

Adapter

½" CPVC

× ½" MIP adapter

½" CPVC

× ½" MIP adapter

Item No.

Description

Case

Qty

636-31305F

SWEAT

Standard heating coil loop kit

636-31308FK Check valve heating coil loop kit

CVPC

636-C1307F2 Standard heating coil loop kit

636-C1310FK2 Check valve heating coil loop kit

B

B

B

B

10 10

10 10

10 10

10 10

Packaging Codes || B: bulk *: individually bar-coded

24110 South Peculiar Drive

Peculiar, Missouri 64078 tel: 1-800-821-3944 fax: 1-800-758-5950 www.siouxchief.com

WATEr HEATEr CONNECTOr BrOCHurE – 3/09 ©2009 SIOUX CHIEF MANUFACTURING

Sioux Chief 633-CG18FP Metal Head™ 18 x 3/4 in. Water Heater Connector Specification

Water Heater

Connectors

Sioux Chief Water Heater Connectors

Copper System

PEX System

CPVC System

Features

Kits

Copper

PEX

CPVC

Tankless Water Heater Connector Kit

Heating Coil Loop Kit

Related manuals

Jones Stephens

G71001

Jones Stephens

G71045

Jones Stephens

G71176

Jones Stephens

G71113

Jones Stephens

G72326

Jones Stephens

G70039

Jones Stephens

G70022

Jones Stephens

G72128

Jones Stephens

G70145

Jones Stephens

G72126

Sioux Chief

CPVC MetalHead™ Water Heater Connectors FIP-Swivel Straight

Jones Stephens

G74105