p8m proofer/holding cabinet

p8m proofer/holding cabinet
P8M
TECHNICAL DATA SHEET FOR
P8M PROOFER/HOLDING CABINET
Full Size Manual / Electric
STANDARD FEATURES
• Dual function Proofer and Holding Cabinet
• Designed for individual use or system installed with
Turbofan 32D Convection Ovens
• 8 full size sheet pan capacity
• 16 half size sheet pan capacity
• 3”/ 76mm tray spacing
• Compact 287/8” / 735mm width
•
•
•
•
•
•
•
•
•
•
•
•
•
•
110-120V plug-in
15A NEMA 5-15P cordset fitted
Full double skin construction
Auto water fill system with optional integrated water filter kit Continuous door seal
Side hinged door (standard LH hinge). Optional RH
hinge (field convertible)
Off / Proof / Hold mode selection
Low velocity circulation fan system
Mechanical thermostat
Humidity level control Dual halogen cabinet interior lamps
Cabinet temperature display thermometer
4 dia. 3” / 76mm castors with 2 front castors dual wheel
and swivel lock, 2 rigid rear castors
100% recyclable packaging
ACCESSORIES
• Optional 3M Cuno water filter kit complete with cartridge
and connection fittings
• Installs in pre-fitted rear housing of cabinet for flush
rear installation
P8M
Unit shall be a Moffat electrically heated Turbofan Proofer and Holding Cabinet ETL Listed and NSF-4 listed. The proofer and holding cabinet shall have double skin
construction with stainless steel interior and exterior sides, front and top. Door shall be side hinged and field reversible. Unit shall have capacity for up to 16 half size
sheet pans or 8 full size sheet pans. A single speed fan shall gently and evenly circulate air around the cabinet. Cabinet shall be controlled by a mechanical thermostat
and humidity via a control of the water tank. A thermometer shall indicate the cabinet temperature. Proofer and holding cabinet shall be mounted on castors, with
two rigid castors at rear and two swivel castors dual swivel and wheel lock and front. Proofer and Holding cabinet shall operate independently or in combination with
Moffat Turbofan model E32D5 or G32D5 Convection Ovens. Proofer and Holding Cabinets shall be fitted with NEMA 5-15P cordsets. Unit shall be supplied in 100%
recyclable shipping packaging.
A City Discount
P8M
P8M Full Size Manual / Electric
Proofer/Holding Cabinet
CONSTRUCTION
304 stainless steel interior cabinet
Stainless steel front, sides and top exterior
Stainless steel interior side racks
Stainless steel frame side hinged door
0.2” / 5mm thick door glass
Stainless steel control panel
Aluminized coated steel base and rear panels
CONTROLS
Off / Proof / Holding mode selector switch.
Mechanical thermostat 65-185°F / 20-85°C
Air heating ON control panel indicator
Humidity level control
Humidity tank ON control panel indicator
Cabinet temperature thermometer
Auto-fill water system standard
CLEANING
Stainless steel top and side exterior panels
Stainless steel interior chamber
Easy access to all interior surfaces
Fully removable stainless steel rack support
Removable humidity water tank (no tools)
SPECIFICATIONS
Electrical Requirements
110-120V, 50/60Hz, 1-phase, 1.45kW, 11.6A
NEMA 5-15P cordset fitted
Water Requirements (optional)
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
External Dimensions
Width 287/8” / 735mm
Height 36” / 914mm including dia. 3” / 76mm castors
Depth
317/8” / 810mm
Proofer Internal Dimensions
Width
18¼”/ 465mm
Height
28¾” / 730mm
Depth
27½” / 700mm
Volume 8.5ft³ / 0.24m3
www.moffat.com
U.S.A.
Moffat Inc
3765 Champion Boulevard
Winston-Salem
North Carolina 27105
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax 336-661 9546
Email [email protected]
www.moffat.com
Nett Weight (P8M)
171lbs / 77.5kg
Packing Data (P8M)
201lbs / 95.3kg
26.8 ft³ / 0.76m3
Width 30” / 760mm
Height
42½” / 1080mm
Depth
363/8” / 925mm
INSTALLATION CLEARANCES
Rear
0“ / 0mm
LH Side
0“ / 0mm
RH Side
1” / 25mm
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance sides is required
Manufactured by:
Moffat Limited
16 Osborne Street PO Box 10-001
Christchurch 8081 New Zealand
ISO9001
Quality
Management
Standard
Designed and manufactured by
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
© Copyright Moffat Ltd
Moffat 1270 / 3.12
A City Discount
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement