iFRAME Network Enclosures
Recessed Uprights Optimize
Airflow, Cable Management and
Administration.
Defined cable pathways,
storage locations, entry and
egress points.
Mates cleanly to standard
12" ladder rack.
Dedicated Cable Paths, Entry
Points for the Industry's Best
Cable Management Solution.
Clean Look Enhances the
Appearance of the Equipment
Room.
Armored Packaging Provides
Industry's Highest Level of
Protection.
• IN-FRAME design optimizes
•
•
airflow by creating designated
cable pathways away from
center of cabinet.
Can be used in front to rear,
side to side, and bottom
to top airflow configurations.
Optional top keeps cable clear
of fan tray exhaust.
Snap in spools can be used
top, front, sides and rear to
route and manage cable.
• 3-Point door locking system.
• Optional locks for side covers.
• Cable pathways are open
•
•
•
facilitating movement and
additions of servers.
Rack positions are identified on
all four uprights aiding the
installation of new gear.
Cable management spools snap
into place.
Optional split rails kit maximizes
cabinet utilization by
accommodating servers and
switchgear in one cabinet.
• Enhanced cable management
features allow cable
storage within the cabinet.
• Much easier to identify and trace
ports and cables.
• Cable management spools with
•
The Hubbell iFRAME® Family of Network Enclosures brings strength, cable
management, good looks and rugged packaging to the network environment.
iFRAME® cabinets are available in preconfigured server and network versions
as well as user-configurable components.
The unique IN-FRAME design optimizes airflow by creating designated cable
pathways away from center of cabinet. As a result, the IN-FRAME design optimizes cooling, extending life of active equipment and simplifies adding and
moving servers. Superb cable management reduces administration time and
operating expense.
And with our unique vertical patch panel, data and KVM ports are located at
each rack unit eliminating 1000' of cable in each fully loaded cabinet and substantially reducing the time to prepare for new servers.
label fields to identify bundles of
cable.
Unobscured cable pathways
simplify tracing cables.
• Stylized look enhances
appearance of any computer room.
• IN-FRAME design manages and
conceals cable bundle.
www.hubbell-premise.com
ENCLOSURES
Network Enclosures
ENCLOSURES
IN-FRAME Design
• Moves uprights out of the way of cable and
patch cords.
• Optimizes airflow, cable management and
administration.
Integrated Waterfalls
• Maintain bend radius of cable entering cabinet.
Clean Appearance
• Enhances the appearance of the equipment room.
Custom Configurations
• Build a cabinet tailored specifically for your
application.
Labeling
• Rack labels identify rack unit positions on all four
rack uprights.
Three Door Styles
• Window.
• Perforated.
• Solid.
In either:
• Full width, or
• Split.
Shipping Protection
• Industry's best shipping protection available
(see below).
Three Layers of Protection for iFRAME® Enclosures
iFRAME® Enclosures
Nothing is more frustrating on the job site than receiving a cabinet and discovering it has been damaged in shipment. iFRAME® Enclosures offer the
industry's best level of protection against shipping damage. No other off-the-shelf cabinet comes with three levels protection to protect against abrasion,
impact, and puncture.
Cabinet bolted to heavy duty skid
and wrapped in heavy gauge plastic to protect against abrasion.
2
Cabinet enclosed in wooden frame
to protect against all but the most
severe impact.
Double-wall corrugated wrap protects cabinet against puncture.
Instructions for unpacking cabinet
clearly visible on every iFRAME®
cabinet purchased.
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
ENCLOSURES
IN-FRAME Design Creates Dedicated
Cable Paths
• Unimpeded cable flow into the cabinet vertically
along the four corners where the cable is most
likely to be routed.
• Front to rear - along the sides.
Optimized Airflow
• Can be used with front to rear or side to side
airflow.
• Frame construction prevents airflow "slippage"
around front to rear cooled rack mount servers.
Cable Management
• Snap in cable management spools route and
guide cable.
• Spools snap at every rack unit along the vertical
uprights, and on the top and sides.
Optional Top
• Facilitates cable entry and routing.
• Keeps cable clear of fan tray exhaust.
• Provisions for two ladder rack tiers above cabinet.
Security
• 3-point locking system for doors, keyed CH-751.
iFRAME® Streamlines Cable Management
Cable management is the single biggest issue installers and users of
network gear have with any cabinet. iFRAME® solutions provide a
comprehensive solution for routing, organizing and updating cable.
By defining cable pathways and entry points, by moving the frame
components out of the way of the cable and by providing vastly more
vertical cable management options than any other manufacturer,
Hubbell iFRAME® solutions eliminate cable management headaches.
Vertical Cable Management Options:
iFRAME® Enclosures
Snap in Spools (ICKSS), see page 7.
Vertical Cable Management Rings (HC26VR2).
Vertical Patch Panel (VPH).
Concealed by 3" Wide Side Cover (Network Cabinet), see page 5.
NEXTFRAME® Vertical Channels (i.e., VS76H, VS76, VS73)
Internal Vertical Organizer (H1KV80, H1KV84), see page 7.
www.hubbell-premise.com
Call 1-800-626-0005
3
ENCLOSURES
Server Cabinet
Designed for Hot Aisle/Cold Aisle
Cooling
Two layer top cable pathways
Integrated Waterfalls and cable
routing spools
Vertical Patch Panel
• Places two or three data ports at each rack
positions.
• Reduces up to 1000 feet of cable in fully
loaded cabinet.
• Drastically improves airflow.
• Double door opens to reveal large cable
channel.
• See Vertical Patch Panel datasheet for more
information.
Traditional Server Cabling
• Snap in spools may be located at every rack
position.
• Facilitate routing cords to traditional patch
panel.
3-phase Power Distribution
• Improves airflow by reducing wire count
below the raised floor.
• Optimizes use of site PDU breaker panel.
Server Cabinets
Delivery:
1 Frame
4 19" Mounting rails (square holes
with M6 cage nuts)
2 Perforated doors, center opening
2 Side panels, flush
1 Kit of 20 M6 cage nuts, screws
and washers
Server Cabinets
Finish: Durable powder coat, black.
Description
Rack Units Height
4
Width
Depth
Server Cabinet, 80"H
43
80"
24"
42"
Server Cabinet, 80"H, without sides
43
80"
24"
42"
Server Cabinet, 80"H
43
80"
24"
36"
Server Cabinet, 80"H, without sides
43
80"
24"
36"
Server Cabinet, 80"H
43
80"
24"
44"
Server Cabinet, 80"H, without sides
43
80"
24"
44"
Catalog No.
H1E80E
H1E80EX
H1E80ED
H1E80EDX
H1E8044E
H1E8044EX
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
ENCLOSURES
Premise Networking Cabinet
Unimpeded Cable Flow
• Into the cabinet - top and bottom.
• Vertically along the four corners where the
cable is most likely to go.
• Front to rear - along the sides.
• Doors open to reveal large cable
channel.
Can be used with front-rear or
side-side airflow
Integrated Waterfalls
Snap in cable routing spools
• Route and guide cable on the top, and
along the sides.
• Snaps at every U along the vertical uprights.
Optional Top
• Facilitates cable entry and routing.
• Keeps cable clear of fan tray exhaust.
• Provides two layer top cable pathways.
Optional Locks for Side Covers
iFRAME® Premise Networking Cabinets
Delivery:
Frame
19" Mounting rails (#12-24)
Kit of 20 screws, #12-24 x 5/8
powder coat, black.
2 Perforated single doors
2 Side panels, 3" wide
Rack Units Height Width Depth
Premise Networking Cabinet, 84"H
45
84"
30"
32"
Premise Networking Cabinet, 84"H, without sides
45
84"
23.94"
32"
Premise Networking Cabinet, 80"H
43
80"
30"
32"
Premise Networking Cabinet, 80"H, without sides
43
80"
23.94"
32"
Premise Networking Cabinet, 84"H
45
84"
30"
36"
Premise Networking Cabinet, 84"H, without sides
45
84"
23.94"
36"
Premise Networking Cabinet, 80"H
43
80"
30"
36"
Premise Networking Cabinet, 80"H, without sides
43
80"
23.94"
36"
www.hubbell-premise.com
Premise Networking Cabinets
1
4
1
Finish: Durable
Description
Catalog No.
H1N84E
H1N84X
H1N80E
H1N80X
H1N84ED
H1N84XD
H1N80ED
H1N80XD
Call 1-800-626-0005
5
ENCLOSURES
Customer Configured Cabinet
Choose from 3 Depths by the Extension
Kit You Select:
• 32": For most networking applications.
• 36": To match legacy server cabinets or
for deep network equipment.
• 42": For server applications.
Choose from 2 Widths by the Side
Cover You Select:
• 24": For most server applications.
• 32": Provides best cable management.
Choose the Best Door for You:
• Perforated: 58% open area provides
excellent ventilation and visibility of network
gear.
• Solid: Doors have removable plates
allowing mounting of fan trays.
• Window: Large viewing area reveals entire
front surface of equipment.
• Split/Center Opening: Great for tight aisles.
• Side Hinged: Simple, unobstructed view/
ventilation.
Other Options Include:
• 19" mounting rails.
• Rack unit identification labels.
• Cable management accessories.
• Cooling accessories.
• Shelves.
Customer Configured Cabinets
iFRAME® Cabinet Frame
Description
iFRAME® Cabinet Frame, 84"H
iFRAME® Cabinet Frame, 80"H
Height
84" (2134)
80" (2032)
Width
24" (610)
24" (610)
Depth
24" (610)
24" (610)
Catalog No.
H1F84
H1F80
19" Equipment Mounting Rails
Choose between #12-24 tapped rails or square holes for M6 cage nuts. Use split rails to
optimize use of rack space. Lower set (80" = 26U / 84" = 28U) has square holes and can
be set for deep servers. Upper set (17U) has tapped #12-24 holes and can be set for patch
panels and horizontal organizers.
Delivery: 1 set of 2 rails. Order equipment mounting hardware and rack labels separately.
Catalog No.
Catalog No.
Description
For 80"H Cabinet
For 84"H Cabinet
43 Rack Units
45 Rack Units
H1KT80
H1KT84
Mounting Rails tapped #12-24
Mounting Rails with square holes for M6 cage nuts
H1KR80
H1KR84
Split Mounting Rails
H1KSR80
H1KSR84
• Top Rails: 17U H, tapped #12-24;
• Bottom Rails: 26U/80"H or 28U/84"H, holes for M6 cage nuts.
H1F84
Shown with rails and extensions not
included, order separately.
6
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
ENCLOSURES
Accessories for Customer Configured Cabinets
Doors and Side Covers
Doors
Door Style
Perforated
Hinge Type
Single Side Hinged
80" Cabinet
Catalog No.
84" Cabinet
Catalog No.
H1D801P
H1D841P
Split/Center Opening
H1D802P
H1D842P
Window
Single Side Hinged
H1D801W
H1D841W
Split/Center Opening
H1D802W
H1D842W
Single Side Hinged
H1D801X
H1D841X
Split/Center Opening
H1D802X
H1D842X
Solid
H1D801X
Side Covers
Style
Flush
3"
Resulting Cabinet
Width
24" (610)
Cabinet Depth
32"
80" Cabinet
Catalog No.
84" Cabinet
Catalog No.
24" (610)
36"
H1S8032F
H1S8432F
H1S8036F
H1S8436F
24" (610)
42"
H1S8042F
H1S8442F
24" (610)
44"
H1S8044F
H1S8444F
30" (762)
32"
H1S8032W
H1S8432W
30" (762)
36"
H1S8036W
H1S8436W
30" (762)
42"
H1S8042W
H1S8442W
30" (762)
44"
H1S8044W
H1S8444W
H1D801P
H1S8036W
H1D802W
H1S8036F
Cable Management Accessories
Service Loop Storage
Includes 1 Mounting Plate, 4
snap in spools, 1 kit mounting
hardware.
NOTE: Cannot be used with flush
side covers.
Catalog No.
H1KSL
Top Plate
Includes 1 Mounting Plate, 4 snap
in spools, 1 kit mounting hardware. Accepts 12" wide ladder.
Catalog No.
H1KT
Snap In Spools
Includes 50 snap in spools
Catalog No.
ICKSS
Vertical Pathway
Clips into frame to provide a
vertical path for routing cable.
Description
Catalog No.
For 80" Cabinet H1KV80
For 84" Cabinet H1KV84
Waterfall/Extension Kit
Includes 2 top extensions, 2
bottom extensions, 1 kit of
mounting hardware.
Description
Catalog No.
4" Extension Kit
H1KX4
(32" resulting cabinet depth)
6" Extension Kit
H1KX6
(36" resulting cabinet depth)
9" Extension Kit
H1KX9
(42" resulting cabinet depth)
H1KX4
www.hubbell-premise.com
Call 1-800-626-0005
7
ENCLOSURES
DIMENSIONS
Premise Cabinet
Catalog No.
H1N84E
H1N84X
H1N80E
H1N80X
H1N84ED
H1N84XD
H1N80ED
H1N80XD
Height
84.20
84.20
80.70
80.70
84.20
84.20
80.70
80.70
Depth
32.04
32.04
32.04
32.04
36.04
36.04
36.04
36.04
"M"
3.95
3.95
3.95
3.95
5.95
5.95
5.95
5.95
SPECIFICATIONS
Construction:
• Frame: 14 ga. welded Steel.
• Mounting rails:
Server: M6 cage nut, 14 ga.
Network: #12-24 tapped, 12 ga.
• Side covers:
Server: 16 ga. C.R.S. (0.063")
Network: 14 ga. Al (0.063")
Finish: durable, black powder coat.
EIA-310-D compliant.
UL 1863 Certified.
Static load capacity:
Server: 1,400 lbs.
Network: 2,000 lbs.
Indicates cable entry area.
23.95
Server Cabinet
without side covers
42.04
18.33
17.71
80.70
Rack labels on all four rack uprights
identify rack unit positions.
Multi-layered shipping protection:
• Cabinet bolted to heavy duty skid.
• Wrapped in heavy gauge plastic.
• Enclosed in a wooden frame.
• Double-wall corrugated wrap.
75.46
Front View
Side View
Hubbell Premise Wiring
HUBBELL INCORPORATED (Delaware)
14 Lord’s Hill Road • Stonington, CT 06378-0901 • (860) 535-8326 • 800-626-0005
Fax: (860) 535-8328 • Internet site: http://www.hubbell-premise.com
DS-M11
Worldwide Locations
Hubbell
Hubbell
Hubbell
Hubbell
Hubbell
Hubbell
Hubbell
Premise Wiring, Asia Pacific
Canada Inc.
Premise Wiring, Central America
Premise Wiring, China
Premise Wiring, Europe
Wiring Systems, India
Int’l. Inc., Korea Branch
852-2836-7131
905-839-1138
506-8328-4283
8621-6374 2659
44-01283 500500
91-80-4091-5044
(82 2) 2607 1363
Fax:
Fax:
Fax:
Fax:
Fax:
Fax:
Fax:
852-2836-7132
905-839-9108
506-2260-1616
8621-6374 2799
44-01283 500400
91-80-4091-5041
(82 2) 2603 7386
Hubbell Premise Wiring, Latin America
Hubbell de Mexico, S.A. de C.V.
Hubbell Premise Wiring, Middle East
Hubbell Premise Wiring, Puerto Rico
Hubbell-Taian Co., Ltd., Taiwan
Hubbell Premise Wiring, Venezuela
Hubbell Premise Wiring, Columbia
305-408-4501
52-55-9151-9999
971-4-393-4192
787-855-1075
886-2-2522-1862
58 41 6680 7453
57-316-341 2017
Fax:
Fax:
Fax:
Fax:
Fax:
Fax:
Fax:
12/08
305-408-8201
52-55-9151-9989
971-4-393-4194
787-855-3265
886-2-2522-1872
58 21 2662 7258
51-1-601 0841
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising