Fujitsu | VFY:T2004SF040DE | Datasheet | Fujitsu PRIMERGY TX200S4

Fujitsu PRIMERGY TX200S4
Issue
PRIMERGY TX200 S4
Dual Socket Quad-Core Intel® Xeon® Server Cost-efficient expansion options and failsafe
operation
Pages
May 07, 2008
2
PRIMERGY TX Tower Servers ensure energy efficient, carefree and continuous operation with proven data center
technology. Their design for maximum ease of use and ease of management has been honored with industry design
awards. The latest processor generation combined with innovative air flow cooling technology (“Cool-safe™”) assures
a long life and the highest possible performance at work. And as your business grows, so do our PRIMERGY TX
servers, providing plenty of headroom for expansion so that you benefit longer from your investments in PRIMERGY
tower servers.
For corporate workgroups and remote sites, PRIMERGY TX servers ensure less troubleshooting and lower costs with
their complete PRIMERGY ServerView Suite remote management functions – flexible management from anywhere at
any time.
The flexible custom supply model and our build-to-order process mean that only fully built and pre-tested solutions are
shipped to customers, who can select from a broad family of tower models to meet their individual needs.
PRIMERGY TX200 S4
Flexible expansion options are the key to placing new or
larger workloads on your server. This applies not only to
physical capacity, such as the number of disk drives,
advanced data protection schemes, or I/O connectivity; in
particular consideration of the transition to 64-bit computing
and virtualization is a must in today’s technology purchase
decisions.
The PRIMERGY TX200 S4 uses a completely new housing
and is a perfect match for these requirements, providing you
with a previously unreached cost-efficient standard. TX200 is
a failsafe operation platform for your application stacks, with
standards such as disk mirroring for SAS and SATA, hot-plug
disks, SDDC and hot-spare memory and the “Cool-safe™”
innovative air flow system design. Expandability is covering
for heavy workload: up to 24 GB FBD667 memory, up to 8
(16) 2.5-inch SAS hard disk drives, and 7 (6) free PCI slots for
heavy I/O requirements. Your business can rely on this
solution!
In addition, further options – such as extended RAID
functions, clustering options and redundancy for power
supplies and fans – tailor these standards to your individual
safety needs.
Benefits
Key Features
„ High security against physical loss of data
„ ECC, built-in RAID 1 functionality and optional ibutton RAID
5 for SATA or modular RAID for SAS configurations
„ Hot-plug HDD infrastructure (standard)
Hot-plug redundant PSU (optional)
Redundant fans (optional)
ServerView Local Service Panel (LSP) (optional)
„ Energy efficient Intel Quad-Core processor (5400 series),
provides four execution cores (2x 6 MB Cache) in one
physical processor with less power consumption
„ Up to 4x SATA or 4 (6)x SATA/SAS 3.5-inch, up to 8 (16)x
2.5-inch SAS hard disks, 7 PCI/PCIe slots, (6 with SAS),
1x Gbit LAN plus extra Service LAN for iRMC S2
„ Tailor made availability, offers the security level which is
recommended by your individual application demands
„ Allowing the platform to do more in less time, IT departments can consolidate applications and more effectively
employ the server with less power consumption
„ Expandability options for further growth
Datasheet ⏐ Issue: May 07, 2008⏐ PRIMERGY TX200 S4
Type
System board
Chip set
Processors
Frequencies
(GHz)
Dual Socket Tower Server
D 2509
Intel® 5000Z
Dual- or Quad-Core Intel® Xeon® (1 - 2)
E5205 (1.86) 65W DC / L5310 (1.60), L5410 (2.33),
L5420 (2.50) 50W QC / E5405 (2,00), E5420 (2.50)
E5430 (2.66 GHz) 80W QC
Front-Side-Bus 1066 (E5205, L5310), 1333 MHz
SLC
2x4 MB (53xx), 6 MB (E52xx), 2x 6 MB (54xx) ECC
Memory
1 GByte up to max. 24 GByte
2-way interleaved, registered ECC PC2--5300F FullyBuffered DIMM
RAM; 3 banks with 2 slots each for modules 512 MB, 1, 2 and 4 GB;
SDDC (Chipkill) and hot-spare memory opt.
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via LAN with
Global Flash and service partition
Interfaces
Serial 1
1x RS-232-C (9-pin) (usable for iRMC or
system or shared)
Serial 2
1x RS-232-C (9-pol)
Parallel (option)
Centronics, 25-pin, EPP/ECP comp.
Keyboard, Mouse
2x PS/2
USB 2.0
1x front, 2x back (UHCI, 480 Mbit/s)
2x internal for backup drive
Graphics
1x VGA (15-pin)
LAN
1x RJ45, 1x Service-LAN 10/100 (can be
switched on Gbit port)
Front Panel
On/off switch; NMI-, reset button; LEDs for global error (amber/ yellow
for Health and CSS), identification (blue), hard disks access (green),
power (amber/green); (back: global error, identification, LAN activity,
LAN mode)
Onboard controller**
IDE (ATA100)
1-channel Fast-IDE controller for 1 device
SATA configuration
4-port SATA for internal HDD`s with RAID 0,
(6311ESB)
1, 10 for Windows and Linux, RAID 5 iButton
key optional) plus 2x for accessible drives
SAS configuration
8 port SAS for internal HDD´s and internal
in PCIe slot either
backup devices with
LSI 1068
RAID 0, 1 (Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows and
Linux)
or LSI 1078
with RAID 0, 1, 10 5, 50, 6, 60 (256 or 512
MB RAID Cache and opt. BBU)
LAN (BCom 5708)
1x 10/100/1000 Mbit/s Ethernet
(TCP/IP acceleration)(PXE-Boot via LAN from
PXE server), iSCSI Boot (also diskless) via
onboard LAN
Server management
Integrated Remote Management Controller
(iRMC S2, 32 MB attached memory) incl.
graphics controller, IPMI 2.0
Hard disk drives
73, 146, 300 Gbyte 3.5-inch SAS or 36, 73,
146 Gbyte 2.5-inch SAS or 160, 250, 500,
750 Gbyte 3.5-inch SATA
3.5-inch SAS / SATA mix only in separate
HD-cages and in separate RAID sets, no later
conversion from 3,5 to 2,5-inch possible
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible capacity
may vary.
I/O Slots (Standard)
4x PCIe x8 (x4 wired), 2x long, (1x for modular SAS RAID controller),
(2 slots x8 with performance adapter)
2x PCI-X 64-bit/ 100 MHz, long, 3,3V; (1x with max. 133 MHz
(IOOP™), if only 1 Slot is occupied)
1x PCI 32-bit / 33 MHz, 5V
Drive bays
for hard disks
4x 3.5-inch, for Hot-plug SAS/SATA or
4 or 8x 2.5-inch for Hot-plug SAS
for optional hard 2x 3.5/1-inch HDD box only in SAS configuration
disks
or
8x 2.5-inch for SAS (occupy 2x 5.25/1.6-inch bay)
All rights reserved, including intellectual property rights. Technical data subject to modifications and
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which
by third parties for their own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu-siemens.com/terms_of_use.html
Copyright © Fujitsu Siemens Computers 05/2008
Page 2 / 2
for accessible
drives
3x 5.25/1.6-inch, (all possible options described in
relevant system configurator)
1x 3,5/1-inch, for FDD (optional)
System fans
Standard 3 fans, redundant (option): 3 + 1 fans
Electrical values ***
1x standard or 2x optional redundant hot-plug power supplies
Output power
700 W / 1 + 1 x 700 W each
Rated voltage range
100 – 127 V / 200 - 240 V
Rated frequency
50 - 60 Hz
Max. rated current
100 – 127 V / 200 - 240 V 9.0 A / 4.5 A
Rated current in basic
100 – 127 V / 200 - 240 V 2.0 A / 0.86 A
configuration
Active power
512 W
Apparent power
531 VA
Heat emission
1843 kJ/h (1746 btu/h)
Temperature/Noise/Dimensions/Weight
Ambient temperature
10°C - 35°C (DIN IEC 721-3-3) class 3K2
ETSI 300 019-2-3 Class 3.1
Declared noise emission
idle*
operating* *(ISO 7779)
according to ISO 9296
ETSI 300 753 Class 3.1
LWAd (1 B = 10 dB) :
5.3 B***
5.4 B***
LpAm (bystander position):
35 dB***
37 dB***
Floor-stand (HxWxD)mm 447 x 215 (372 with tilt protection) x 699
Rack (HxWxD)
215 x 486 x 777 mm;
Rack mounting depth 742 mm; 5U
Weight
35 kg (configuration dependent)
Compliance with Norms and Standards
Product safety
Global
IEC 60950-1
Europe
EN 60950-1
USA
UL 60950-1
Canada
CAN/CSA C22.2 No. 60950-1-03
Electromagnetic compatibility
This product and the released accessories, are in compliance with
emission class A. In certain cases measures have to be taken to
reduce the electro magnetic influence to other equipment.
Europe
EN 55022 class A, EN 55024,
EN 61000-3-2 / 3-3, ETSI EN300386
Taiwan / Japan
CNS 13438 class A; VCCI class A
Australia / New Zealand AS / NZS CISPR 22 class A
USA / Canada
FCC class A
Declaration of conformity
Europe (CE)
2004/108/EC(EMC);2006/95 EC(LVD)
North America
FCC class A
Approvals
Product safety
Global
CB
Europe
CE
USA / Canada
CSAUS / CSAC
There is general compliance with the safety requirements of all
European countries and North America. National approvals required
in order to satisfy statutory regulations or for other reasons, can be
applied for on request.
Supported server operating systems
See actual release status operating systems: e.g. Windows Server
2003; Windows Server 2008, Novell SUSE Linux Enterprise Server ,
Red Hat Enterprise Linux; VMware ESX (Support of Debian, Ubuntu,
Mandriva Linux and other Linux derivatives on demand)
** For supported controllers (onboard and PCI cards for SAS, SATA,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
*** only with standard fans and standard PSU
Server Management (see separate data sheets)
Standard:
PRIMERGY ServerView Suite; PDA, ASR&R
Optional: (excerpt) iRMC S2 Advanced Pack, ServerView Local
Service Panel (LSP)
Published by
Fujitsu Siemens Computers
http://www.fujitsu-siemens.com/
Company stamp
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising