advertisement
2006/06/30
Service Documents
Confidential, for authorized service technicians only!
Do not disclose this information to or share these documents with third parties.
Vertraulich! Nur für autorisierte Servicetechniker!
Nicht zur Weitergabe an Dritte freigegeben!
L.U.C.A.S.
PERFORMER
SUB
Achtung!
Note!
The components used in this product - particularly parts affecting safety as well as speakers and transformers - were developed and manufactured to certain specifications. Please use original spare parts only to ensure the product remains fully functional and safe.
Die in diesem Produkt verwendeten Komponenten, insbesondere sicherheitsrelevante Teile, Lautsprecher und Transformatoren wurden nach spezifischen Vorgaben entwickelt und gefertigt.
Bitte benutzen Sie ausschließlich Original-Ersatzteile – nur so ist die volle Funktionalität und Sicherheit gewährleistet.
TECHNICAL SERVICE:
Stamer Musikanlagen GmbH • Magdeburger Str. 8 • 66606 St.Wendel • Germany
Music & Sales P.E. GmbH • Leipziger Str. 3 • 66606 St.Wendel • Germany
Directory features drawing-numbers-example standard for single wire confection
page: page:
8
9
HK2005-LUCAS Performer Subwoofer exploded drawings:
page: 10 complete front grille chassis
Rev.: B
Rev.: A
Rev.: A page: 11-12 page: 13 page: 14-16 cabling preamp assembly
Rev.: C
Rev.: A page: 17-18 page: 19 preamp Rev.: 20-21 amp module page: 22
spare parts list circuit diagrams
preamp input-board
Rev.: A
Rev.: B
Rev.: B page: page:
3-7
23-24 page: 25-28 page: 29
layout diagrams
preamp Rev.: B page: 30
L.U.C.A.S PERFORMER Manual 1.0
1 L.U.C.A.S PERFORMER System
Components
Subwoofer
The L.U.C.A.S PERFORMER subwoofer’s housing is split into two chambers. The front chamber serves as the speaker cabinet for the 15" direct-loaded loudspeaker, which has a power-handling capacity of 500
W RMS and a nominal impedance of 8 ohms. The active electronic circuitry, the power unit, controller and Class D power amps are housed in a separate compartment at the rear of the cabinet.
Satellites
Satellites are loaded with a 8" HK Audio Custom speaker and a 1" compression driver with a 60° x 40°
CD horn. They are rated for 200 W RMS powerhandling capacity and a nominal impedance of
8 ohms.
The newly developed, integrated MonoTilt ™ pole mount allows sound energy to be utilized with great efficiency. Troublesome ceiling reflections are minimized; the sound is clearer, tighter, and more focused.
Beyond that, the cabinet is stabilized at its center of gravity - no wobbling, tilting, or unintentional turning.
2 Transport
To transport the system, simply set the subwoofer on its casters and place the satellites onto the subwoofer with the foam-rubber grille side facing down.
Secure the satellites, for example, using a locking strap. Use original HK Audio L.U.C.A.S PERFORMER protective covers to gear up your personal system for the rigors of the road. Amply padded and protected against moisture, your L.U.C.A.S
PERFORMER is sure to deliver satisfying performance for a long time to come.
More about Limiter LEDs
Dedicated LEDs, one each for the left and right signal path as well as for the subwoofer, display the limiter status for each of those paths.
What is this display telling me?
The green LED indicates that the input is receiving a signal. As long as the LED lights up green, the system is operating at low-to-medium levels, with plenty of headroom available for the power amps.
The yellow LED may flash off and on, but it may not illuminate continuously.
If it does this, back off the volume on your mixer.
Red indicates Protect status, that is, a malfunction or overload has occurred and the power amps have been muted as a precaution.
1 1 1 2
4
5
3 3
3 Connections and Control
Features
L.U.C.A.S PERFORMER Subwoofer
1 Limiter LEDs
Much like rev counters, these LEDs indicate the active system’s operating status. For more info, read the sidebar “More about Limiter LEDs.”
2 Power On LED
This LED lights up when the power switch (see rear panel) is set to On and the system is connected to a mains power supply.
3 Gain Left/ Right
Operation: Turn the Gain knob all the way down
(counterclockwise) before switching the system on.
Ensure the system is connected to the satellites and all other connected components are on before powering it up. Be sure to switch on the connected mixer as well as all signal sources connected to it, for example, keyboards, amps, effects, and so forth.
After you power the system up, set the Gain knob to the 0 dBV or 12 o’clock setting. This is the preferred level if you have connected a mixer. (Note: If you connect a CD player or a keyboard directly to the system, you may not be able to achieve peak volume at this setting. If this is the case, twist the Gain knob to the far right.)
If you hear distortion or a saturated signal, first check the signal sources and, if possible, reduce the output signal level there. If you are unable to turn down the level of the signal sent to L.U.C.A.S
PERFORMER at the signal source, adjust the input sensitivity using the Gain knobs. (see also Tips and
Tricks—section 4).
4 Subwoofer Level
Handling: When this knob is set to the 12 o’clock position, the subwoofer’s and the satellite’s respective volumes are matched, ensuring the proper balance between the subwoofer’s bass output and the stallites’ mid/high-range output. If desired, you can twist the Subwoofer Level knob to the left, i.e. counterclockwise, to cut the subwoofer’s level by as much as -12 dB and to the right to boost it by as much as 6 dB.
5 Ground
Ground lift button for separating the signal and chassis ground in the event of hum. To rid the system of low-frequency hum, press the Ground switch in. If this doesn’t solve the problem, check all power and audio cables connected to L.U.C.A.S
PERFORMER for damage, as well as all cables routing signals to the mixing console (see also Tips and Tricks in Section 4).
6 Input Left bzw. Input Right (Combination XLR/1/4" jacks)
L.U.C.A.S PERFORMER is equipped with separate left and right channel inputs for connecting to a mixer. Connections: Connect the audio cables that route the signal coming from your mixer (master left/right, line out, or a similar circuit) to these balanced inputs using microphone cables equipped with XLR connectors. The XLR connectors’ pin assignments must be as follows: 1= ground, 2= +,
3= -. You can also use a 1/4" Tip-Ring-Sleeve plug to route signals via balanced circuits. Unbalanced signals can be patched in via a mono plug.
L.U.C.A.S PERFORMER -- user panel
7 Through Left, Trough Right
Connections: Parallel outputs for routing the line signal (left or right) to other systems, outboard components, monitor power amps, etc., via XLR cables.
8 To Satellite Left and Right
Connections: Connect these Speakon ® outputs to the left and right L.U.C.A.S PERFORMER satellites using speaker cables equipped with Speakon ® connectors.
Note: Be sure to rotate the Speakon ® connectors clockwise until they lock in place!
9 Power Switch
Operation: On/off switch for the active system. The red Power On LED in the upper control panel lights up when the system is switched on. The active
L.U.C.A.S PERFORMER system should always be switched on last after you power up all equipment connected to it, and should be switched off first before you switch off all the other equipment connected to it.
6 7 6 7
8 8
L.U.C.A.S PERFORMER - user panel rear
9
7
L.U.C.A.S PERFORMER Manual 1.0
12
10
11
L.U.C.A.S PERFORMER - user panel rear
12
10 Mains Input
Connections: Use the factory-included mains cable
(power cord) to connect from this socket to a wall receptacle.
11 Mains Cable Tab
Clamp the power cable into the tab to prevent it from being pulled out inadvertently.
12 Fans
These fans (on the side and back of the housing) keep the power amp modules cool. Always keep the fan and ventilation vents free of dirt and debris, and ensure they remain unobstructed so air can circulate freely.
L.U.C.A.S PERFORMER Satellite
Input
Connections: Connect the Speakon ® inputs to the left and right L.U.C.A.S PERFORMER satellite outputs using speaker cables equipped with Speakon ® connectors. Note: Be sure to twist the Speakon ® connectors clockwise until they lock in place! You must first disengage the safety catch before you can unplug the connector. To do this, pull the bayonet catch towards the cord.
• Ensure that the vents on the subwoofer’s side panels are free of dirt and that the fan blades can rotate freely. Otherwise, electronic components may overheat and suffer damage.
• L.U.C.A.S PERFORMER takes care of delivering optimum sound—so provide it with optimum input signals! Noise such as hum is generally caused by defective cables, the wrong type of cables, or unbalanced signals being fed to the mixing console. Check all audio cables and mains cables.
• Avoid distortion! Not only is it unpleasant to your audience’s ears, it also endangers your equipment.
Make sure all components that are connected directly and indirectly to L.U.C.A.S PERFORMER have sufficient power ratings, and that they are not distorting from being driven at their respective limits. Provide a clean, undistorted signal to the system that won’t require backing off the Gain knob to clean it up.
• Avoid ground loops! If, for example, you connect the mixer to one mains circuit/wall outlet, and
L.U.C.A.S PERFORMER to another, you may encounter a ground loop. To prevent this problem, always connect the L.U.C.A.S PERFORMER system and the mixing console to the same electrical circuit (same phase!). If your equipment hums despite this precaution, the Ground Lift switch can be a great help.
4 Tips and Tricks
• Do not expose electronic circuitry to moisture!
When you set the system up outdoors, be sure to protect it against rain. Keep soft drinks, beer or any other liquids well away from the cabinets to protect their electronic components from short circuits.
• To ensure proper ventilation, make sure the subwoofer is placed a sufficient distance away from walls and isn’t covered by curtains and the like.
This is vital to keep the power amps cool.
CAUTION: Never tape over the plug’s ground terminal – this endangers lives!
5 L.U.C.A.S PERFORMER
Accessories
HK AUDIO Speaker Add On Package
This is the complete L.U.C.A.S PERFORMER accessory kit consisting of two aluminum cabinet tripods, one gig bag, and two speaker cables.
HK AUDIO Protective Covers for L.U.C.A.S
PERFORMER
This set comprises one cover for the subwoofer and two covers for the satellites. Tear-resistant and water-repellant, these rugged covers are thickly padded to afford lasting protection for the L.U.C.A.S
PERFORMER system during transport.
To learn more about Original HK AUDIO
Accessories, talk to your HK AUDIO ® dealer or visit www.hkaudio.com.
Sound seems distorted.
1 Check the LED displays on your mixer. They should not be constantly in the red. If necessary, reduce the volume at the mixer.
2 If the LED displays on your mixer are in the green, turn back L.U.C.A.S PERFORMER’s Gain knob.
3 Watch the LEDs of the Limit Left, Limit Right and Limit Subwoofer displays on L.U.C.A.S
PERFORMER’s control panel. These may light up yellow, but only intermittently. Under no circumstances may they continuously illuminate yellow. If this is the case, turn the Gain down
(knob counterclockwise).
6 Troubleshooting
The Power On LED dos not light up red after you switch the system on.
1 Check if the power cable is plugged into the Mains
Input.
2 Check if the mains power supply is providing current.
The Power On LED lights up, but there is no sound coming from the cabinets.
1 Check the cables connected to the Left and Right inputs.
2 Check if the signal sources (mixer, keyboard, CD player) are on.
3 Is the Gain knob turned up?
4 Check the speaker cables for damage.
5 Check if the Speakon“ connectors are fully engaged in their sockets (rotated to the right). They must be locked in place to establish an electrical connection.
The subwoofer’s low frequency output is too soft.
1 Check the setting of the Subwoofer Level knob.
2 Adjust this knob to set the volume of the subwoofer to the desired level.
Annoying hum
1 Check the cables connecting the source of the audio signal to L.U.C.A.S PERFORMER. Replace any damaged cords.
2 If you cannot pinpoint the cause of the humming, press the Ground switch in. This should remedy the problem in most cases.
9
7 Technical Specifications
L.U.C.A.S PERFORMER Subwoofer
Inputs/outputs:
Line In:
Input:
Input impedance:
Sensitivity:
Max. input level:
Parallel out:
Speaker outputs:
XLR female, 1/4" combination jack
(pin 1= ground; 2= +, 3= -)
Electronically balanced & floating
47 k ohms
0 dBV (=1V)
+ 20 dBu
XLR male (pin 1= ground; 2=+, 3= -)
Speakon ® NL 4 (pin 1+= +, 1-= -)
Amplifiers:
Subwoofer output:
Satellites output:
Protective circuits:
Speakers:
Woofer:
Subwoofer frequency response:
1x 500 W RMS / Class D power amp
2x 200 W RMS / Class D power amp
MultiBand limiter
1x 15"
47 Hz -130 Hz, ± 3 dB
38 Hz -130 Hz, - 10 dB
101 dB (half space)
126 dB @ 10% THD (half space)
SPL 1W / 1m:
Max. SPL / 1m:
Weights and measures:
Weight:
Dimensions (WxHxD): without casters
29,5 kg/ 64,9 lbs
47.5 cm x 47 cm x 58.5 cm
18-3/4" x 18-1/2" x 23"
L.U.C.A.S PERFORMER Satellite
Inputs:
Speaker input:
Speakers:
Woofer:
Driver:
Directivity:
Overall nominal impedance:
Nominal power handling:
SPL 1W / 1m:
Max. SPL / 1m:
Frequency response:
(via Controller)
Crossover frequency (passive):
Driver protection:
Pole mount:
Weights and measures:
Weight:
Dimensions (WxHxD):
Speakon ® NL 4 (pin 1+= +, 1-= -)
1x 8"
1x 1"
60° x 40° CD horn
8 ohms
200 W RMS
102 dB (half space)
124 dB @ 10% THD (half space)
130 Hz - 19 kHz, +/- 3 dB
2.4 kHz/ 12 dB / octave
Dynamic protective circuit
HK Audio MonoTilt™ 36 mm, -10°
7,2 kg/ 15,8 lbs.
26 cm x 38,5 cm x 28,5 cm
10-1/8" x 15-1/8" x 11-1/4"
General electrical data:
Protection class 1 (protectively earthed)
Max. current consumption:
Max. power consumption:
Mains voltage range
Ambient temperature range during operation:
4.4 A (220 – 240 V) • 8 A (110 – 120 V)
1000 Watts
+/- 10%
-10° C to +35° C
11
DRAWING-NUMBERS
EXAMPLE
HK0106-EX-R01-1A
DEPARTMENT:
R = R&D
SERIAL NUMBER
VERSION
REVISION
CHARACTER:
BL = SHEET METAL / BLECH
EX = EXPLODED DRAWING / EXPLOSIONSZEICHNUNG
HZ = CABINET / HOLZGEHÄUSE
KU = PLASTIC / KUNSTSTOFF
LP = PCB / LEITERPLATTEN
SO = MISCELLANEOUS / SONSTIGES
SP = SCHEMATIC / SCHALTPLÄNE
TR = TRANSFORMER / TRANSFORMATOR
GK = WIRING DIAGRAM / GERÄTEVERKABELUNG
PROJECT-NR.:
HK = HK AUDIO
HU = HUGHES&KETTNER
MP = MINDPRINT
Stand
17. Jun 04
Standard for single wire confection.
16 B 150 638 I
-
485 W Z I 1015 style 1015 according UL specifications
I = completely insulated with black shrinktube or appropriate sleeve
IT = partly insulated; only crimp connection insulated.
no marking = without insulation
Z = with additional junction no marking = without additional junction
W = angled faston no marking = straight faston
Faston connector brass tin-plated DIN 46245
638 = 6,3 * 0,8 [mm]
488 = 4,8 * 0,8 [mm]
485 = 4,8 * 0,5 [mm] if fully insulated (
I) insulation with blue shrinktube if partly insulated (
IT) use IF 602 485 .
288 = 2,8 * 0,8 [mm]
285 = 2,8 * 0,5 [mm] if fully insulated (I) insulation with blue shrinktube if partly insulated (IT) use IF 602 485
abiso = 5mm bared and tin-plated (teilabzug)
text for special constructions, (for example. 4mm ringshaped faston) the larger faston connector always mentioned at first. (Nathan drawing number controlling) lenght in mm within a 50 mm raster
colour
B = black (phase conductor)
R = red
BR = brown
BL = blue (neutral conductor)
W = white
YG = yellow-green (ground bonding/ earthing connection)
cross section
16 = AWG 16 (prefered usage)
Q1.5 = H07VK 1,5mm² (prefered usage) wire designation:
P + lfd Nr. = AWG single wire black, red, blue, brown or white
E + lfd Nr. = AWG single wire green- yellow
L + lfd Nr. = twisted AWG double wire, lenght specification always in twisted condition
FQL + lfd Nr. = crossover wiring H07VK
Regarding special wirings like wiring harness or similar, drawings will be prepared and appropriate drawing numbers will be stored in the article archive.
Service Documents
HK2005
L.U.C.A.S.
PERFORMER
SUBWOOFER
Confidential, for authorized service technicians only! Do not disclose this information to or share these documents with third parties.
TECHNICAL SERVICE:
Stamer Musikanlagen GmbH • Magdeburger Str. 8 • 66606 St.Wendel • Germany
Music & Sales P.E. GmbH • Leipziger Str. 3 • 66606 St.Wendel • Germany
#$
( ) ' (
% #$ $
# #$
#$ # %
$
#$ %
#$
#$
#
#$ %
##
#$
#$
$
#$
#$ #
#$
$ #$
#$ $
#$ $
&
#$
$ #$ #
#$
$%
% #$ #
%
# $%
& %%
(
! "
% '
!"
'
( ) ' (
'( )*+,-. )
$%
#$
#$
#$ %
#$ $
$ #$
% #$ $
# #$ %
#$
#$
#$
#$
#$ $
#$ #
#$
$ #$ #
% #$ #
# #$
B #% $
B #%
B #%%
##
)*+,-. ) )*+,-. ) /-(0)+1*+'
-)3')4-) 3)' * 2)+.. "((-45.6
-)3')4-)8 "(( 9''/- 0"5+ -*
-)3')4-) -.-0*)' +0( 0;"((+(
3)' * 2)+.. )--+ 3')0-4- * 1)'3+.- =
/"41+ 2 9''.
3'"4 *75-
;-A"2' ('0,-* ;-"/ 0"1 (0)-98 A 8 5."0,
;-A"2' ('0,-* 0'7 *-)(7 , ;-"/ (0)-98 A 8 5."0,
+*-.
)' *2+**-) 70"( -)3')4-) "((
'.:2-; 70"( -)3')4 "((
;"(( 70 -)3')4-) <
.-0; <-)(*)-57 2(9+ ,-. =
>449'..- '0;5"7(0;?.+-(
0;"74(*'33 @;)0;-
57((0;)"75B (9
57((- ,(0;)"75A (9
1."(*+0 (1"0-)8 A A 8 '.6"4+/ 5."0,
1"A (0)-9( 3') 5"0,9"..8 A 8 5."0,
0)'(( )-0-((-/ 1" ;-"/ *"11+ 2 (0)-9 9+*; 0'..")8 #A 8 5."0, .-0;(0;)
1."(*+0 (1"0-)8 A A 8 '.6"4+/ 5."0, +(* C.(-
1"A 0;+15'")/ (0)-98 1" ;-"/ 8 A 8 5."0,
+(* C.(8 B B D44E
C0,9" /(0;)"75-8 B (9
" -"/
'13 8#B
8 B B D44E
1"A (9 B
(9
;-A"2' ('0,-* ;-"/ 0"1 (0)-98 A 8 5."0,
;-A"2' ('0,-* .'9 ;-"/ 0"1 (0)-98 A 8 5."0,
)755-) 3''* (F7")-8 (-.3 "/;-(+?-8 5."0,
)755-) 3''* %B D44E
1."(*+0 /+(; G G
57((0;)"75-
744+37(( %B
)+33(0;".-
B (9
57((0;) ."0;,'13
744+37(( F7"/) (-.5(*,.-5 (9
D44E
G
B (9
G
0' -0*') 1."*-
(-".+ 2 *"1- A 44
(-".+ 2 *"1- A 44
, 1'.67)-*;" - 2.7-8 4.*)( *75-
# $ !
H % ;4(
-3-(*+27 2(1."**-
(' -.. " / 3"/- ?-)( B 44
(' -.. " / 3"/- ?-)( B 44
'.67)-*;" .-5-)8 4. ")*7(0;-
# $ !
H % ;4(
- 2-
%
8 .3/4
8 .3/4
AAA
%
# $%
& %%
(
! "
% '
!"
'
" %#2 !
./ --
./ 1
./0 1
0< .1
< .1* *
%#2 !
%#2 !
-
$% & #!! "% %45 3 %'!
'4 6"%#4 & #!!
' 7 8!'42
3 "4 # %# $
"$' $ %'#$#$& #$& : ! & ;
! & = 63# =
' &!6 7 ! ' ) 0 /
% 42&#%%
26"%#2"45'6 $%5 '9#%
45$ !!8 "%#& &
& = 63# =
! 8"% ! ' ) 0 /
#% !
( $&
./0 1
./ --
( ) ' (
.1
0
./ 1
! "
! "# $ $%&#%% '""
%
# $%
& %%
(
( )
+++++++++++++++++++
% '
$,'
*
*
'
!!!
"#$% &' #$(")$
*)'"+%,+* -,)$
( ) ' (
%
# $%
& %%
(
! "
% '
'
( ) ' (
'# )&,.$/ ) )&,.$/ )
D
)&,.$/ ) %$#(),0&,'+
"(2# $)3')4$) )$240 ##$45/6
+0"&5'2)% "(2# 2!
2,+# ,/&$) "(2# 402(& 7
%"#& 0)'&$(&,'+9 2('"#&,( 3'249 5/2(.9
9 44
:, ,+)"#:9 42,+# )'(.$) #-,&(:9 7
0'-$) ,+/$&9 &60$ 9 (:")&$)
#0$2.'+ (:2##,# ('++$(&')9
<"2% 9 (: = "+,&9
"#: '&&'4 1),'
#'3&&'"(: 0'&, .+'59 9 3/$!,3,&9
"(2# 2! (2#&') #&25,/,8$)
"5-''3$) :$$& $&2/ :2##,#9 "(2# $)3')4$)
&''&:$% /'(. -2#:$)9 ? 9 @9 8,+( 0/2&$%
#$/3 /'(.,+* :$!2*'+ +"& -,&: 0/2#&,( ,+#$)&9 9 8,+( 0/2&$%
:$!2*'+ #02($)9 &60$ 9 ! 9 8,+( 0/2&$%
()'## )$($##$% )2,#$% ('"+&$)#"+. #()$-9 ! 9 #&2,+/$## #&$$/9
5/2(.
()'## )$($##$% )2,#$% ('"+&$)#"+. #()$-9 ! 9 5/2(.
#$/3 /'(.,+* :$!2*'+ +"& -,&: 0/2#&,( ,+#$)&9 9 8,+( 0/2&$%
5/,+% ),B$& #&$$/ #&2+%2)%9 ! 9 5/2(.
:$!2*'+ #'(.$& 'B2/ :$2% #()$-9 ! 9 5/2(.
()'## )$( )2,#$% ('"+&$)# &20 #()$- - ("&&,+* #/'&9 ! 9
5/2(.
42,+# (25/$ #&)2,+ )$/,$39 "%,' ("#&'4 42%$
)"55$)5"33$) !
-,B$/ (2#&') 1
#,/,('+ */"$9 4/&)# &"5$
9 5/2(.
1,&$/
"(2# $)3')4$) 7')#&"3$
+0"&5'2)% "(2# 2!
$&83,/& "(2# 40
&2"5#(:"&8 "(2# 2! ; ;
$&8#(:2/&$) *)'## 7
$&85"(:#$ 160
7
0$2.'+5"(:#$ 0'/ $(.,*9
<"2% 9 (: = '%"/9
+'03 -&,(: 1
+'03 '&, 44 #- #- -#
/$(: "(2# 2! &>&8-,+.$/
/$(: "(2# $)3') 2## :2##
A(:$) (:$,5$ 289 9 B8
&'04"&&$) B8
,#& '/ ++$+ "C$+*$D B8
,+#$+#$+.#(:)2"5$ D #-
,+#$+#$+.#(:)2"5$
&'04"&&$) B8
/,+%+,$&$ &2:/ #(:- D
,+#$+#(:) 4 ++$+#
D #-
D #-
$+.#(:) 3 "+#&#&'33 9 D 9 9 #-
25$/:2/&$) "%,'
E"44,0"33$) E "33$) !
$+.)'//$ 44 #(:-2)8
,/,('+ &)2+#02)$+&9 4/ 2)&"#(:$
$+*$
%
# $%
& %%
(
! "
!!!
% '
'
( ) ' (
%
# $%
& %%
(
! "
% '
'
!"#$%$ &'!%( 0!%%# 1%--2&
) ( (
3 + +
*
!"#$%$ &'!%( 0!%%# 1%--2&
) ( (
3 + %1%-%
* "'# .",-%
( ) ' (
* * ' ;% + 7<! 64"$ %!0=#; ( ,-"4 4#$ .>&"!; 2>-%#$%!
": % ;7'- %! 0% "4 .> ( %!-%04#0 % ;/",%-
=#0% ' ;% + "47 /2!!'0'%! ? " >"#@ 2>-%#$%!
!"#$%$ &'!%( ,-"./
) ( (
*++ *+
!"#$%$ &'!%( !%$
) ( (
*++ *+
.2##%. '2# 9!%":9 2 '#94
5 7-" !',,2# .",-%
83
+
!"#$%$ &'!%( ,-4%
) ( (
+
+
!"#$%$ &'!%( ,-"./
) ( (
+ +
+
+
!"#$%$ &'!%( ,-"./
) ( (
+ +
!"#$%$ &'!%( ,-4%
) ( (
+ +
+
!"#$%$ &'!%( 0%%# 1%--2&
) ( (
3 + +
+
5 7-" !',,2# .",-%
83
+
5 7-" !',,2# .",-%
83
6
!"#$%$ &'!%( !%$
5 ( (
+ *++
6
!"#$%$ &'!%( ,-"./
5 ( (
+ *++
%
# $%
& %%
(
! "
% '
'
( ) ' (
#*+
.
/
0
:
;
<
7
4
,-
4 / 0
.
4 / 07
4 / 7.
4 //;;
4 // .
4 //40
4 /0.:
4 : ;
4 ; .<
,/ ,0 +1 ,2 ,*
+ !
5 , . 6 / 07 07 8 8
+ !
+ !
5 , . 6 ./
5 , .
..
07 07
07 07
8 8
8 8
+ !
+ !
5 , .
./ 07 07 8 8
5 , .
0 :77 :7; 8 8
+ !
+ !
5 , .
0; :77 :7; 8 8
5 , . 6 / 07 " 8 8
!, +1!= >1!+ 2!1
?! ,==* 1!= / / .; "2 ;8 .8/
,
,9 . 6 / 07 07 8 8
,9 . 6 ./ 07 07 8 8
,9 .
..
07 07 8 8
,9 .
./ 07 07 8 8
,9 .
0 :77 :7; 8 8
,9 .
0; :77 :7; 8 8
,9 . 6 / 07 " 8 8
#*5 -!= >1!+ 2!1
% !1@=!
/ / .; "2 ;8 .8/<
.
0
/
.
/
/
.
/
.
3
%
# $%
& %%
(
! "
% '
'
E E 974163 3
E 974100 2
E 974075 1
INDEX ÄNDERUNG
ZEICHNER
Pos.
1
2
3
Artikel-Nr. 1 description Titel
974075 cross recessed panhead screw, M3x5, zinc plated Linsenschraube M3x5 vz
974100 toothed lock washer, D=3,2, AZ, black zinc plated Fächer-Scheibe az, 3,2 sw vz
974163 PCB holder, 90°, nickel plated Befestigungselement M3x15 NI
Menge
3
3
3
TITEL:
66606 St. Wendel / Germany
ZEICHNUNGS-NR.:
HK2005 -- L.U.C.A.S. PERFORMER
PREAMP ASSEMBLY
VERSION:
HK2005-EX-R06-1A 1
REVISION:
A
AM: BLATT:
ERSTELLT VON:
MICHAEL BOHLENDER 09.03.2006
1
GEPRÜFT/
FREIGEGEBEN VON:
AM:
BLÄTTER
WERKSTOFF:
OBERFLÄCHE:
DATEINAME: HK2005-EX-R06-1A-VORSTUFE
, 1 + , 1 1 + ,
1 1 ) !
!
!
*
( ) ' (
%
# $%
& %%
(
! "
!" # $ $%& '" ((
% '
) *
+ * *
'
" , -( " ./ /( /$0 ' (%
( ) ' (
Spare Parts List for:
Project:
Project Number:
Assembly:
Pos. Article No. Description
1 914033
Poti B10K lin mono RK16
2
3
914049
Poti B10K lin mono CC RK16
938009
Transistor BC 546B NPN TO92
4
5
6
7
938012
Transistor BC 556B PNP TO92
940019
IC TL 074CN 4*FET OP
940021
IC TL 082CN/CP 2*FET OP
940032
IC MC 33078P 2*lo-noice ON
8
9
10
940036
IC MC 33079P 4*lo-noice ON
950001 push button sw itch,2x ON-NONE-ON
952150 shrouded pin header 20pins, double row
HK2005-LP-R01-1B
L.U.C.A.S. Performer
HK2005
Preamp Board
Bezeichnung
Poti B10K lin mono RK16
Poti B10K lin mono CC RK16
Transistor BC 546B NPN TO92
Transistor BC 556B PNP TO92
IC TL 074CN 4*FET OP
IC TL 082CN/CP 2*FET OP
IC MC 33078P 2*lo-noice ON
IC MC 33079P 4*lo-noice ON
Druckschalter Push Button Sw . 2x UM
Wannenstecker 2*10pol Gprint
Reference Designators
P1, P2
P3
Q9, Q8, Q7, Q6, Q5, Q4
Q1, Q2, Q3
U7
U10
U11, U6
U1, U2, U3, U4, U5
SW1
JP1, JP2, JP3
Quantity
2
1
6
1
2
3
1
5
1
3
%
# $%
& %%
(
! "
!" # $ $%& '" ((
% '
) *
+ * *
'
" , -( " ./ /( /$0 ' (%
E 959068
QuadAMP, 4ch PWM unit
To ensure the procedure of our quality assurance
(burn-in-test, quality-test,...) please send the complete module to our technical service for replacement.
For customer inquiry please contact our service-team.
HK2005-EX-R03-1B-SUB-COMPLETE
Article No. 1 (230V) Article No. 2 (117V) Article No. 3 (100V)
E1133
400278
502197
970451
972008
972047
974011
974017
974108
974322
974355
974454
974455
974475
974509
976001
976009
976094
976115
982037
982044
988165
994235
HK2005-EX-R02-1A-SUB-FRONTGRILLE-ASSEMBLY
Article No. 1 (230V) Article No. 2 (117V) Article No. 3 (100V)
970335
972085
974158
980105
986016
HK2005-EX-R01-1B-SUB-CHASSIS
Article No. 1 (230V) Article No. 2 (117V) Article No. 3 (100V)
547057
600088
600089
943239
950060
952260
952305
959068
966075
966076
970769
970791
974103
974110
974197
Description
L.U.C.A.S. Performer front grill assembly
LUCAS Performer, Bass wooden cabinet
L.U.C.A.S. Performer electronics chassis front grill reeinforcement profile 15" damping wool
PE-foam tube hexagon socket head cap screw, M6x25, black hexagon socket countersunk head screw, M6x25, black plastic PCB spacer, 6.2x10x15, Polyamid black
ABC-Spax-S screws for backwall, 4x20, black cross recessed panhead tapping screw with collar, 3.9x30, black plastic PCB spacer, 6.2x10x10, Polyamid black
ABC-Spax-S chipboard screw, panhead Z, 5x16, black hexagon socket head cap screw, M6x50, black hexagon socket low head cap screw, M6x30, black rubber foot square, self-adhesive, black rubber foot D38*H11 [mm] plastic dish 3403 HKBS! DART !
connector plate sealing tape 2x6mm sealing tape 2x15mm
1k polyurethane glue, 310mltrs. tube
SICA LP 390.75/N360 WT 8 Ohms
Description front grille stretched metal acoustic grille foam, black 15mm snapon retaining ring (for logo) logo ´HK Audio´ 55x55 mm foam glue, Alfa D 4572
Description
54 Lucas Performer Preamp Assembly
60 Inputboard Lucas Max
60 Mains Filter Lucas Impact 100-240V dust protection, acoustic foam, black, PPI15, 5mm hi-inrush, mains rocker switch, C13150VB power inlet, type 6100.3300, Schurter speakon chassis connector, NL4MP-3
QuadAMP, 4ch PWM unit, RD0303
Push-Bottom-Trio softtouch poti knob, REAN, flexifit, F313
Lucas Max castor stabilizer
Subwoofer Sheet Metal Chassis, Lucas Performer toothed lock washer, D=4.3, AZ, zinc plated self locking hexagon nut with plastic insert, M3, zinc plated hexagon PCB spacer, type B, M3x8, zinc plated
Bezeichnung
Frontgitter Lucas Performer Bass
40 Holzgeh.Lucas Perform.Bass
50 Chass.Luc. Performer 100-240V
Blech Verstrebungswinkel 15"
Dämmwolle Hochbauschvlies
PE-Schaumstoff-Röhrchen
Inbusschraube M6*25 sw
Inbussenkschraube M6x25 sw
Dist.Hülse PE 6,2*10*15 [mm]
Rückwandschraube, 4*20 sw
Blechschr. KFR-Kopf 3,9* 30 sw
Dist.Hülse PE 6,2*10*10[mm]
Pan Head-Z ABC-Spax sw 5*16
Inbusschraube M6*50 sw
Inbusschr. Flachkopf M6*30 sw
Gummifuss quadr. selbstkleb. sw
Gummifuss D38*H11 [mm]
Griffschale 3403 HKBS! DART !
Befestigungsplatte M20
Iso-Zell-Band fadenvers. 2*6mm
Iso-Zell-Band fadenvers. 2*15mm
Polyurethan 1-K Kleber, 310ml Kartusche
SICA LP 390.75/N360 WT 8 Ohms
Bezeichnung
Streckgitter
Akustikschaum Anthrazit 15mm
Schnellbefestiger f. Logo
Logo ´HK Audio´ 55x55 mm
Klebstoff Alfa D 4572
Bezeichnung
54 Lucas Performer Vorstufe
60 Inputboard Lucas Max
60 Netzfilt.Lucas Imp 100-240V
Staubschutz Lucas Max "07"
Netzschalter gross C1350VB
Netzbuchse Typ 6100.3300
Speakonbuchse 4pol eckig, NL4MP-3
QuadAMP, 4ch PWM Modul, RD0303
Knopf-Swtich TRIO
Knopf-Poti 13mm sw/sw/ws
Blech Lucas Max Stützwinkel
Blech Lucas Perfor.Bass Chass.
Fächer-Scheibe az, 4,3 vz
Stopmutter M3 vz
Dist. Bol Innen/Außengew. M3*8 vz
Quantity
1
1
1
1 xxx
3
3
1
2
3
4
1
1
Quantity
1
1
1
1
1
2
2
2
2
4
2
2
2
14
4
Quantity
1
1
1
8
4
1
2
4
4
2
1
1,10 lfdm
0,30 lfdm xxx
1
974201
974271
974290
974356
974392
974521
976125
976141
976169
988011
HK2005-GK-R01-1C-SUB-CABLING
Article No. 1 (230V) Article No. 2 (117V) Article No. 3 (100V)
962030
962038
962081
962255
962261
962293
962314
964050
965617
HK2005-EX-R06-1A-PREAMP
Article No. 1 (230V) Article No. 2 (117V) Article No. 3 (100V)
974075
974100
974163
HK2005-LP-R01-1B-PREAMP
Article No.
914033
914049
938009
938012
940019
940021
940032
940036
950001
952150
Ref.Destricption
P1, P2
P3 cross recessed raised countersunk screw, M3x5, stainless steel, black cross recessed raised countersunk screw, M3x8, black self locking hexagon nut with plastic insert, M4, zinc plated blind rivet steel standard, 6x10, black hexagon socket oval head screw, M3x8, black cross rec. raised counters. tap. screw w. cutting slot, 2.9x9.5, black mains cable strain relief, HKAudio custom made rubberbuffer 15x15 B
Swivel castor LPA-TPA 75K-FK, black silicon glue, 310mltrs tube
Description stranded wire 16-YG-200-638-638 AWG, UL, CSA stranded wire 16-YG-120-638-638 AWG, UL, CSA stranded wire 16-B-110-638I-638I AWG, UL, CSA stranded wire 16-BL-120-638I-638I AWG, UL, CSA stranded wire 16-B-300-488I-485I AWG, UL, CSA stranded wire 16-R-350-488I-485I AWG, UL, CSA stranded wire 16-YG-200-638-eyelet AWG, UL, CSA
Mainscable Lucas Impact flat ribbon cable 20-2-150 Typ 5, RM1,26
Description cross recessed panhead screw, M3x5, zinc plated toothed lock washer, D=3,2, AZ, black zinc plated
PCB holder, 90°, nickel plated
Description
Poti B10K lin mono RK16
Poti B10K lin mono CC RK16
Q9, Q8, Q7, Q6, Q5, Q4 Transistor BC 546B NPN TO92
Q1, Q2, Q3
U7
U10
U11, U6
U1, U2, U3, U4, U5
SW1
JP1, JP2, JP3
Transistor BC 556B PNP TO92
IC TL 074CN 4*FET OP
IC TL 082CN/CP 2*FET OP
IC MC 33078P 2*lo-noice ON
IC MC 33079P 4*lo-noice ON push button switch,2x ON-NONE-ON shrouded pin header 20pins, double row
Linsensenkschraube A2 M3*5 sw
Linsensenkschraube M3*8 sw
Stopmutter M4 vz
Blindniete Stahl schw. 6*10
Linsenschr.m.Innens. M3*8 sw
Senkschr. f. Kunststoff 2,9*9,5, sw
Kabelhalter HK Audio
Gummipuffer GM-Puffer 15x15 B
Lenkrolle 75mm RAL2005 schwarz
Silicon transparent, 310ml Kartusche
Bezeichnung
Litze 16-YG-200-638-638 AWG, UL, CSA
Litze 16-YG-120-638-638 AWG, UL, CSA
Litze 16-B-110-638I-638I AWG, UL, CSA
Litze 16-BL-120-638I-638I AWG, UL, CSA
Litze 16-B-300-488I-485I AWG, UL, CSA
Litze 16-R-350-488I-485I AWG, UL, CSA
Litze 16-YG-200-638-eyelet AWG, UL, CSA
Powerkabel Lucas Impact
Flachband 20-2-150 Typ 5, RM1,27
Bezeichnung
Linsenschraube M3x5 vz
Fächer-Scheibe az, 3,2 sw vz
Befestigungselement M3x15 NI
Bezeichnung
Poti B10K lin mono RK16
Poti B10K lin mono CC RK16
Transistor BC 546B NPN TO92
Transistor BC 556B PNP TO92
IC TL 074CN 4*FET OP
IC TL 082CN/CP 2*FET OP
IC MC 33078P 2*lo-noice ON
IC MC 33079P 4*lo-noice ON
Druckschalter Push Button Sw. 2x UM
Wannenstecker 2*10pol Gprint
Quantity
1
1
2
2
2
2
1
1
3
Quantity
3
3
3
2
12
1
4
3
2
4
16
4 xxx
Quantity
2
1
1
1
6
3
1
3
2
5
1 2
D
C
Input A
HK2005-SP-R01-1B-02Input_A.sch
LEFT
RIGHT
BASS
LIMIT_LEFT
LIMIT_RIGHT
LIMIT BASS
Display
HK2005-SP-R01-1B-04Diplay.sch
LEFT
RIGHT
BASS
LIMIT_LEFT
LIMIT_RIGHT
LIMIT BASS
3
Date Modification
08-Mar-06 1st draft released
07-Apr-06 filter setups changed for EQ4 and Subsonic
(see revision logfile for details), sensitivity reduced, R114 and C57 set to NA
4
Revision Name
1A M. Bohlender
1B M. Bohlender
D
C
B
Input B
HK2005-SP-R01-1B-03Input_B.sch
RIGHT
A
All rights reserved. No part of this schematic may be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the author.
1 2
B
3
NA = not assembled part ----- EX = exclusive part, no alternative allowed
Title:
HK2005 L.U.C.A.S. Performer
Preamp and Filter
66606 St. Wendel / Germany
Number:
HK2005-SP-R01-1B
Drawn by:
Michael Bohlender
Checked by:
Michael Bohlender
PCB No.:
Filename: HK2005-SP-R01-1B-01Main.sch
Version:
1
Date:
08.03.2006
Revision:
B
Page:
1
Date:
13.04.2006
4
Pages
4
A
1 2 3 4 5 6 7 8
D
C
B
SUBWOOFER
LEVEL
C47
100n/63V
P3
RK16-B10K-CC
R137
1K5
C19
10u/63V
C20
10u/63V
R64
4K7
R63
4K7
R77
7K5
R28
22K
R29
22K
FROM ANALOG INPUT BOARD
HK1005-LP-R04 (latest revision)
JP3
SEK18-20P
RT_NEG
RT_POS
RT_NEG
RT_POS
INPUT 1
INPUT2
R78
0R0
NA
C21
+15V
D5
+15V
D6
-15V -15V
C50
22n/63V
R76
47K
-15V
2
3
-
+
U3A
MC33079P(MOT)
+15V
1
D7
R140
47K
R75
82K
D8
C51
22n/63V
R31
22K
5
6
+
7
-
U5B
MC33079P(MOT)
GAIN LEFT (max 6dB)
BR12
0R0
GAIN_LEFT
C23
220n/63V-K
R32
P2
RK16-B10K
22K
C24
R33
100K
47p/100V-K
R35
18K
10
9
+
8
-
R34
U5C
MC33079P(MOT)
7K5
C25
47p/100V-K
BR15
0R0
6
4
1
3
SW1A
PBN-S2A3.5NIL-A-AG
2
5
R30
47R/1W
C45
47n/250V
JP4
FASTON-6.3-ST
R36
10K
R43
4K7
R44
20K
C31
22n/63V
R45
22K
R141
0R0
NA
C34
22n/63V
6
5
-
7
+
U3B
MC33079P(MOT)
R52
20K
R46
2K2
R51
33K
C32
5n6/63V
R50
33K
9
10
-
8
+
U3C
MC33079P(MOT)
A
R55
11K
C40
470n/63V
R70
56K
10
9
+
8
-
R68
U2C
MC33079P(MOT)
8K2
C46
C38
220n/63V
C37
220n/63V
R56
18K
12
13
+
14
-
U2D
MC33079P(MOT)
R59
18K
R60
3K9
C39
47n/63V
3
2
-
+
+15V
-15V
1
E U2A
MC33079P(MOT)
R69
10K
47p/100V-K
R58
16K
R57
11K
+15V
-15V
+15V
-15V
GND
All rights reserved. No part of this schematic may be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the author.
1 2 3 4 5
R61
3K9
R142
0R0
NA
C35
5n6/63V
R53
33K
R37
7K5
3
2
-
+
R38
+15V
-15V
11K
C26
R138
10K
U5A
MC33079P(MOT)
47p/100V-K
1
R148
10K
12
13
-
+
C27 C28
150n/63V
R39
3K3
150n/63V
14
U5D
MC33079P(MOT)
R40
24K
5
6
-
+
LIMIT_RIGHT
LIMIT BASS
GAIN_RIGHT
U11B
MC33078P(MOT)
7
BR8
0R0
R66
47R
C29 C30
150n/63V
R42
7K5
150n/63V
R41
12K
3
2
-
+
+15V
U11A
MC33078P(MOT)
1
-15V
D
R104
56K
+15V
R84
220K
-15V
R85
150K
R94
4K7
Q4
BC546B
R107
2K7
+15V
R95
4K7
R103
150K
Q5
BC546B
C54
100n/63V
LIMIT_BASS
9
11
13
15
17
19
5
7
1
3
JP2
SEK18-20P
10
12
14
16
6
8
2
4
18
20
LIMIT_LEFT
C
R48
22K
R143
0R0
NA
R47
3K9
C33
3n3/63V
R49
24K
C36
3n3/63V
RIGHT
LEFT
BASS
RIGHT
LEFT
BASS
+15V
-15V
9
11
13
15
17
19
5
7
1
3
JP1
SEK18-20P
10
12
14
16
6
8
2
4
18
20
+15V
-15V
B
13
12
-
14
+
U3D
MC33079P(MOT)
R54
18K
R67
47R
+15V
R108
150K
R109
4K7
-15V
R110
4K7
R112
150K
+15V
R113
220K
R62
22K
C41
100n/63V
RIGHT
BR1
0R0
6
C42
220n/63V
5
6
+
7
-
U2B
MC33079P(MOT)
Q6
BC546B
R111
2K7
R114
Q7
BC546B
56K
NA
C57
100n/63V
NA
NA = not assembled part ----- EX = exclusive part, no alternative allowed
RIGHT
Title:
HK2005 L.U.C.A.S. Performer
Input and Filters - Left Ch.
66606 St. Wendel / Germany
Number:
HK2005-SP-R01-1B
Drawn by:
Michael Bohlender
Checked by:
Michael Bohlender
PCB No.:
Filename: HK2005-SP-R01-1B-02Input_A.sch
7
Version:
1
Date:
08.03.2006
Revision:
B
Page:
2
Date:
13.04.2006
4
Pages
8
A
D
C
B
1 2 3 4
RT_POS
RT_NEG
C1
10u/63V
C2
10u/63V
R1
22K
R2
22K
C3
100p/100V-K
+15V
D1
+15V
D2
D3 D4
-15V -15V
R4
22K
5
6
R5
+
7
-
U1B
MC33079P(MOT)
GAIN RIGHT (max 6dB)
GAIN_RIGHT
P1
RK16-B10K
22K
C5
47p/100V-K
GAIN_RIGHT
BR10
GAIN_RIGHT
0R0
BR16
0R0
GAIN_RIGHT
GAIN_RIGHT
C6
220n/63V
R6
100K
R9
18K
10
9
+
8
R8
-
U1C
MC33079P(MOT)
7K5
C7
47p/100V-K
R7
10K
INPUT 1
INPUT1_INV
R144
47K
R74
0R0
NA
R73
7K5 C48
22n/63V
R72
47K
-15V
2
3
-
+
U4A
MC33079P(MOT)
+15V
1
C49
22n/63V
R71
82K
R17
20K
R145
0R0
NA
R16
4K7
C13
22n/63V
R18
22K
C16
22n/63V
6
5
-
7
+
U4B
MC33079P(MOT)
R25
20K
R24
33K
R146
0R0
NA
R19
2K2
C14
5n6/63V
R23
33K
C17
5n6/63V
9
10
-
8
+
U4C
MC33079P(MOT)
R26
33K
5 6 7 8
R10
7K5
3
2
-
+
+15V
R11
-15V
11K
R139
10K
U1A
MC33079P(MOT)
1
C8
47p/100V-K
R151
10K
12
13
-
+
14
U1D
MC33079P(MOT)
C9
150n/63V
R12
3K3
C10
150n/63V
R13
24K
5
6
-
+
U6B
MC33078P(MOT)
7
BR3
0R0
R65
47R
C11 C12
150n/63V
R15
7K5
150n/63V
R14
12K
+15V
3
2
-
+
1
U6A
MC33078P(MOT)
-15V
R129
56K
+15V
R122
220K
-15V
R123
150K
R126
4K7
Q8
BC546B
R130
2K7
+15V
R127
4K7
R128
150K
Q9
BC546B
C60
100n/63V
D
C
R21
22K
R147
0R0
NA
R20
3K9
C15
3n3/63V
R22
24K
C18
3n3/63V
13
12
-
14
+
U4D
MC33079P(MOT)
R27
18K
+15V
-15V
+
C61
2u2/35V-T
+
C62
2u2/35V-T
+
C43
2u2/35V-T
+
C44
2u2/35V-T
+15V
-15V
GND
B
A
All rights reserved. No part of this schematic may be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the author.
1 2 3 4 5 6
NA = not assembled part ----- EX = exclusive part, no alternative allowed
Title:
HK2005 L.U.C.A.S. Performer
Input and Filters - Right Ch.
66606 St. Wendel / Germany
Number:
HK2005-SP-R01-1B
Drawn by:
Michael Bohlender
Checked by:
Michael Bohlender
PCB No.:
Filename: HK2005-SP-R01-1B-03Input_B.sch
7
Version:
1
Date:
08.03.2006
Revision:
B
Page:
3
Date:
13.04.2006
4
Pages
8
A
1 2 3 4 5 6 7 8
D
C
RIGHT
+15V
R96
10K
3
2
-
+
1
R86
-15V
22K
E U7A
TL074CN
R79
10K
+15V
R80
1MEG
R81
22K
D11
1N4148
R83
R82
47R
10K
C52
680p/100V-K
5
6
-
+
U7B
TL074CN
7
C53
1n/63V
Q1
BC556B
+15V
LIMIT_RIGHT
LIMIT_RIGHT
R88
10K
R91
4K7
R87
1K5/1W
R_GREEN
R97
1K5/1W
R_RED
D13
5MM-RG
BASS
D
3
2
-
+
+15V
1
U10A
TL082CN
-15V
R115
10K
R105
22K
R99
1MEG
R98
10K
+15V
R100
22K
D14
1N4148
R102
10K
R101
47R
C55
680p/100V-K
5
6
-
+
U10B
TL082CN
7
C56
1n/63V
LIMIT BASS
BR7
0R0
+15V
Q2
BC556B
R116
1K5/1W
R89
10K
R92
4K7
R106
1K5/1W
D16
5MM-RG
C
B
A
LEFT
R134
10K
12
13
-
+
14
U7D
TL074CN
R124
22K
R117
10K
+15V
R118
1MEG
1N4148
R119
22K
D17
R121
R120
47R
10K
+15V
C58
680p/100V-K
10
9
-
+
U7C
TL074CN
8
C59
1n/63V
Q3
BC556B
R125
1K5/1W
L_GREEN
R135
1K5/1W
L_RED
D19
5MM-RG
R90
10K
R93
4K7
LIMIT_LEFT
LIMIT_LEFT
All rights reserved. No part of this schematic may be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the author.
1 2 3 4 5
BR14
0R0
BR13
0R0
BR11
0R0
BR9
0R0
BR2
0R0
-15V
R136
1K5/1W
D20
5MM-R
Z3
HALTEBOLZEN-LG
Z2
HALTEBOLZEN-LG
Z1
HALTEBOLZEN-LG
B
+15V
-15V
+15V
BR4
0R0
BR5
0R0
BR6
0R0
6
+15V
-15V
+15V
HO3
NDK-R0-B40
HO4
NDK-R0-B40
HO7
NDK-R0-B40
+15V
-15V
GND
+15V
-15V
NA = not assembled part ----- EX = exclusive part, no alternative allowed
Title:
HK2005 L.U.C.A.S. Performer
LIMIT INDICATORS
66606 St. Wendel / Germany
Number:
HK2005-SP-R01-1B
Drawn by:
Michael Bohlender
Checked by:
Michael Bohlender
PCB No.:
Filename: HK2005-SP-R01-1B-04Diplay.sch
7
Version:
1
Date:
08.03.2006
Revision:
B
Page:
4
Date:
13.04.2006
4
Pages
8
A
1 2 3 4
D
C
J1
NCJ9FI-H
JP3
2
3
1
XLR/M-RX90602
2
3
1
4
5
6
7
8
9
10
R1
100K
NA
R2
100K
NA
C1
47p/100V-K
NA
C2
47p/100V-K
NA
C3
47p/100V-K
NA
GND_L
JP5
SEK18-20P
D
C
B
J2
NCJ9FI-H
JP4
2
3
1
XLR/M-RX90602
2
3
1
4
5
6
7
8
9
10
A
All rights reserved. No part of this schematic may be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the author.
1 2
R3
100K
NA
R4
100K
NA
GND_R
C4
47p/100V-K
NA
C5
47p/100V-K
NA
C6
47p/100V-K
NA
3
JP6
FASTON-6.3-ST
B
NA = not assembled part ----- EX = exclusive part, no alternative allowed
HT = high temperature part, assemble with distance from PCB
Title:
HK1005-Input_Analog_Board
66606 St. Wendel / Germany
Number:
HK1005-SP-R04
Drawn by:
F. Sitter
Checked by:
Name geprüft
PCB No.:
Filename: HK1005-SP-R04-1B.sch
Version:
1
Date:
09.08.2005
Revision:
B
Page:
1
Date:
01.01.2001
1
Pages
4
A
( ) ' (
%
# $%
& %%
(
! "
!" # $ $%& '" ((
% '
) *
'
" + ,( " -. .( .$/ ' (%
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project