Moxa | A53/DB9 EU | Datasheet | Moxa Transio A52/53

Moxa Transio A52/53
Media Conversion Solutions
A52/53
RS-232 to RS-422/485 Converters
Features
ADDC™ (Automatic Data Direction Control) RS-485
data control
Auto baudrate sensing
RS-422 hardware flow control: CTS, RTS signals
LED indicators for power and signal states
RS-485 multidrop operation, up to 32 nodes
Surge protection, 25 KV ESD
2 KV isolation protection (A53)
Built-in 120 Ω termination resistors
4
Introduction
General Converter & Isolator Solutions
A52/53 is a general RS-232 to RS-422/485 converter
designed for users who need an interface conversion
product to extend RS-232 transmission distance and increase
networking capability.
Specifications
Communications
Power
RS-232 Signals: Tx, Rx, DTR, DSR, RTS, CTS, DCD, GND (RJ45)
RS-422/485:
Supports RS-422, 2-wire RS-485 (DIP Switch selectable)
Supports 4-wire RS-422, up to 10 nodes, 1.2 km with RTS, CTS
Supports 2-wire RS-485, up to 32 nodes, 1.2 km
RS-485 Data Direction Control: ADDC™
Surge Protection: 25 KV ESD
Isolation: 2 KV (A53), Power/Signal
Input Power Voltage: 9 to 30 VDC, 350 mA
Overcurrent Protection:
Protection against 2 signals shorted together
Power Consumption:
A52: 170 mA @ 9V
A53: 285 mA @ 9V
Environmental
Operating Temperature: 0 to 55°C
Storage Temperature: -20 to 75°C
Humidity: 5 to 95% RH
Mechanical
Dimensions (W x D x H): 90 x 60 x 21 mm
Case: ABS
Weight: 85 ± 5 g
Regulatory Approvals
CE Class A, FCC Class A
Warranty: 5 years
Ordering Information
A52: RS-232 to RS-485 Converter with 25 KV ESD Surge Protection
A53: RS-232 to RS-485 Converter with 25 KV ESD Surge Protection & 2 KV Isolation
A52/110V or A52/230V: A52 with 110V or 230V Power Adaptor
A53/110V or A53/230V: A53 with 110V or 230V Power Adaptor
4-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising