Extreme Networks | 61030 | Datasheet | Extreme networks BlackDiamond 10808/8800, 700W/1200W AC PSU

Extreme networks BlackDiamond 10808/8800, 700W/1200W AC PSU
Extreme Networks Data Sheet
BlackDiamond 10808
BlackDiamond 10808 hardware supports a wide
array of protocols. In addition, BlackDiamond 10808
incorporates programmable ASIC technology. This
programmability ensures that the platform will
support emerging protocols without costly hardware
upgrades—thus offering great investment protection.
BlackDiamond® 10808––Redefining the Intelligent Core.
Security
• Threat detection and response with CLEAR-Flow Security
Rules Engine
• Layer 3 virtual switching
• Hardened network infrastructure
Voice-Class Availability
• Redundant hardware design
• Modular operating system for non-stop operation with
ExtremeXOS® Operating System (OS)
• High availability network using Ethernet Automatic
Protection Switching (EAPS)
Scalable Performance
• System scalability with large table sizes, port capacity
• Quality of Service (QoS) and multicast performance
providing application scalability
• Scalable management through extensibility
BlackDiamond 10808 delivers security that scales to
10 gigabit rates, voice-class availability and predictable performance.
These applications require high-performance,
scalability and the highest level of resiliency. Even
more importantly, BlackDiamond 10808 is designed to help meet tomorrow’s needs as well as
today’s. Extensibility is the key to building intelligent core networks that can adapt and respond to
changing requirements over time; this is where
BlackDiamond 10808 truly stands alone.
Target Applications
BlackDiamond 10808 has been designed to excel
in a wide array of applications, including:
• Enterprise backbone switch for highperformance networks
• Enterprise data center switch providing
server interconnection for mission-critical
applications
• Switch for Carrier Ethernet core and distribution delivering triple play services
• Switch for Internet exchanges providing
high-bandwidth Layer 2 interconnection
• Interconnect switch for High Performance
Cluster Computing (HPCC) delivering
solutions to complex computing problems
Extreme Networks Data Sheet
Security BlackDiamond 10808 delivers a new level of security to Ethernet core networking. BlackDiamond 10808 complements the
perimeter firewalls by protecting the “soft interior” of the network that currently goes unprotected. Utilizing the industry’s most
advanced CLEAR-Flow Security Rules Engine, BlackDiamond 10808 can be programmed to automatically detect and mitigate
security threats in seconds.
Threat Detection and Response
CLEAR-Flow Security
Rules Engine
CLEAR-Flow Security Rules Engine
provides first order threat detection and
mitigation and mirrors traffic to security
resources for further analysis of
suspicious traffic in the network.
Security resources are virtually available
across the entire multi-gigabit network
thus enabling cost-effective scalability of
the security solution.
Sentriant® security appliance can add/
modify the BlackDiamond 10808 switch’s
CLEAR-Flow rules and Access Control
Lists (ACLs) to inspect additional traffic
or change inspection thresholds thereby
allowing an automated system to
fine-tune inspection rules in real-time.
Port Mirroring
Providing intrusion detection and
prevention, BlackDiamond 10808
supports many-to-one and cross-module
port mirroring. This can be used to mirror
traffic to an external network appliance
such as an intrusion detection device for
trend analysis or be utilized by a network
administrator as a diagnostic tool when
fending off a network attack.
Line-Rate Access Control Lists
ACLs are one of the most powerful tools
to control network resource utilization
and to secure and protect the network.
BlackDiamond 10808 supports up to
128K ACLs based on Layer 2, 3 or 4
header information such as the MAC
address or IP source/destination address.
Virtual Router
With Layer 3 Virtual Switching,
BlackDiamond brings the concept of
virtualization to multi-layer switching.
Layer 3 Virtual Switching allows
partitioning of a single switch into many
virtual routers. A virtual router has the
same capabilities and properties as a
physical router does. It inherits all the
same routing mechanisms for configuration, operation and troubleshooting. As a
© 2010 Extreme Networks, Inc. All rights reserved.
result, each virtual switch domain can be
separately managed and isolated for
security safety measures (refer to Figure 1:
Layer 3 Virtual Switching).
Subnet 1
Subnet 2
Layer 3
Virtual
Switch #1
Subnet 1
Layer 3
Virtual
Switch #2
Subnet 2
Layer 3
Virtual
Switch #1
VLAN 1
ASIC-based Longest Prefix Match
Longest Prefix Match (LPM) routing
elimin-ates the need for control plane
software to learn new flows and allows the
network to be resilient under a DoS
attack. With LPM the CPU is not burdened
with forwarding the “first packet” to any
unrecognized destination, freeing the CPU
for critical tasks.
Secure Management
Protocols like SSH2, SCP and SNMPv3
supported by a BlackDiamond 10808
series switch prevent the interception of
management communications and
man-in-the-middle attacks.
VLAN 2
Figure 1: Layer 3 Virtual Switching
Network traffic can also be secluded into
separate virtual domains to minimize
security threats. The design of virtual
switch domains enables logical separation
of route tables. Multiple route tables
enable route isolation, which allows
the operator to make use of overlapping
IP address spaces. Overlapping IP
address spaces allow multiple communities of interest to share a single physical
networking infrastructure.
MD5 Authentication of Routing
Protocols
MD5 authentication of routing protocols
prevents attackers from tampering with
valid messages and attacking routing
sessions.
Hardened Network
Infrastructure
Denial of Service Protection
BlackDiamond 10808 handles Denial of
Service (DoS) attacks gracefully. If the
switch detects an unusually large number
of packets in the CPU input queue, it will
assemble ACLs that automatically stop
these packets from reaching the CPU.
After a period of time, the ACLs are
removed. If the attack continues, they
are reinstalled.
BlackDiamond 10808—Page 2
Extreme Networks Data Sheet
Voice-Class Availability A high-performance network connection, whether used to connect PCs and IP telephones at the access layer or to interconnect
servers in a cluster, is only useful if it is also highly available. BlackDiamond 10808 utilizes the industry-leading ExtremeXOS
modular operating system that raises the availability of the switch. Network level resiliency protocols are added to increase the
availability of the network.
Redundant Hardware Design
Redundant Management Modules
BlackDiamond 10808 is configured so
that if one Management Switch Module
(MSM) fails, the second MSM will
automatically take over management
responsibility for the entire switch. This
feature is critical for networks running
voice and other mission-critical
applications.
Advanced Chassis Design
for Availability
BlackDiamond 10808 includes a passive
backplane complemented by highavailability design elements such as
isolated control and data planes, redundant
controller boards for power distribution
and fan control, and environmental
monitoring to identify anomalies before
they affect network availability.
Redundant Load Sharing
Power Supplies
BlackDiamond 10808 supports a set of
redundant power configurations that can
load share up to six internal power
supplies simultaneously. Four power
supplies in a 3 + 1 redundancy configuration can power a fully loaded chassis with
gigabit or 10 Gigabit Ethernet ports. Six
power supplies in a 3 + 3 configuration
can provide input power redundancy.
Modular Operating System for
Non-stop Operation
True Preemptive Multitasking
and Protected Memory
ExtremeXOS allows each of the many
tasks—such as Open Shortest Path First
(OSPF) and Spanning Tree—to run as
separate operating system tasks that
are protected from each other as shown
in Figure 2.
Loadable Software Modules
Equal Cost Multipath
The modular design of ExtremeXOS allows
the extension of switch functionality. New
functionality can easily be added to the
switch.
Equal Cost Multipath enables uplinks to
be load balanced for performance and cost
savings while also supporting redundant
failover. If an uplink fails, traffic is
automatically routed to the remaining
uplinks and connectivity is maintained.
High Availability Network
Protocols
Ethernet Automatic Protection
Switching
EAPS allows the IP network to provide the
level of resiliency and uptime that users
expect from their traditional voice networks.
EAPS is superior to the Spanning Tree or
Rapid Spanning Tree Protocols, offering
sub-second (less than 50 milliseconds)
recovery and delivers consistent failover
regardless of number of VLANs, number of
network nodes or network topology. In most
situations, VoIP calls don’t drop and digital
video feeds don’t freeze or pixelize because
EAPS enables the network to recover
almost transparently from link failure.
Spanning Tree/Rapid Spanning
Tree Protocols
BlackDiamond 10808 supports Spanning Tree
(802.1D), Per VLAN Spanning Tree (PVST+),
Rapid Spanning Tree (802.1w) and Multiple
Instances of Spanning Tree (802.1s) protocols
for Layer 2 resiliency.
Software Enhanced Availability
Software enhanced availability allows
users to remain connected to the network
even if part of the network infrastructure
is down. The BlackDiamond 10808 switch
constantly checks for problems in the
network connections using advanced
Layer 3 protocols such as OSPF (with
graceful restart), VRRP and ESRP (ESRP
supported in Layer 2 or Layer 3), and
dynamically routes around the problem.
Link Aggregation (802.3ad)
Cross-module link aggregation enables
trunking of up to eight links on a single
logical connection, for up to 80 Gbps of
redundant bandwidth per logical connection.
Configuration Management
(CLI/SNMP/XML/Scripts)
ExtremeXOS Application Modules
sFlow®
Network
Login
802.1x
SSH2
OSPF
VRRP
STP
EAPS
ESRP
ExtremeXOS Kernel-Loadable Modules
ExtremeXOS Kernel
Hardware Abstraction Layer
Hardware
Figure 2: ExtremeXOS Modular
Operating System
Process Monitoring and Restart
ExtremeXOS dramatically increases
network availability by monitoring in real
time the independent operating system
processes. If any of them become
unresponsive, or stop running, they are
automatically restarted.
© 2010 Extreme Networks, Inc. All rights reserved.
BlackDiamond 10808—Page 3
Extreme Networks Data Sheet
Scalable Performance Offering industry-leading 10 gigabit and Gigabit Ethernet port density, BlackDiamond 10808 scales to meet the immediate
requirements and anticipates future requirements of even very demanding IPv4 and IPv6 environments.
Low Latency
System Scalability
Port Density
Port density is critical to the scalability
of a switching solution. The moment a
single additional port is needed above
and beyond what is available with any
single switch, hierarchical switching is
required. As soon as more than one
switch is needed for an application, up
to half of each switch’s bandwidth may
need to be dedicated just for switch
interconnects. As a result, the
network becomes much more complex
and expensive.
It is always desirable for a single switch
to support more ports than initially
required. This “headroom” helps to
future-proof the network design (refer
to Figure 4: Port Capacity).
Application Scalability
QoS Performance
BlackDiamond 10808 delivers deep
packet buffers throughout the architecture,
helping ensure to that even in times of
congestion, packets can be queued and
reliably delivered (rather than being
discarded). While this adds latency
under such times of stress, less advanced switches will instead discard the
excess traffic. By buffering the traffic,
servers do not need to timeout and
retransmit traffic––greatly increasing the
efficiency of both the network and the
computer engines.
When selecting a networking switch for
high-performance applications, selecting
low-latency alternatives for the networking
component provides added margin for
latency introduced by other elements.
With the low switching latency of 9
microseconds for 64-byte packets,
BlackDiamond 10808 is ideal for highperformance applications.
Jumbo Frame Support
Jumbo frames of up to 9,216 bytes in length
are supported by BlackDiamond 10808.
Jumbo frames are particularly important in
high-performance cluster computing
applications, where studies have shown
their use can reduce server CPU loads by
as much as 50%. Jumbo frames also
reduce protocol overhead and ensure
higher overall network throughput—since
protocol headers are fixed size, larger
frames have a higher ratio of packet
payload to packet header.
Multicast
BlackDiamond 10808 builds on
Extreme Networks® leadership position in
IP multicast, supporting hardware
identification and replication of multicast
traffic. Extreme Networks unique switch
fabric architecture need not store and
forward multiple copies of the same packet
across the fabric. This ensures excellent
multicast performance without impacting
other traffic running through the switch.
Multicast features include Internet Group
I/O Modules
Port Capacity
60-port 10/100/1000BASE-T (RJ-45)
48-10GBASE-X (XENPAK) ports
60-port 1000BASE-X (SFP)
480-10/100/1000BASE-T ports
20-port 1000BASE-X (SFP)
480-1000BASE-X SFP ports
Management Protocol (IGMP v1, v2 & v3)
and Protocol Independent Multicast
(PIM), Dense Mode (DM), Sparse  Mode
(SM) and Source Specific Mode (SSM).
Scalable Management Through
Extensibility
Ease of Management
Extreme Networks has developed tools
that save you time and resources in
managing your network. EPICenter™
provides fault, configuration,
accounting, performance, and security
functions to manage Extreme Networks
multi-layer switching equipment in a
converged network.
Extensibility to Integrate New
Applications
ExtremeXOS allows for flexible expansion
of network capabilities by providing
a mechanism for third-party applications
in the network to interact directly with
the operating system. ExtremeXOS uses
a secure XML-based API to integrate
with best-of-breed monitoring and
security devices. This extensibility
allows integration with third-party
applications to provide a closed loop for
new monitoring and response capabilities.
6-port 10GBASE-X (XENPAK)
2-port 10GBASE-X (XENPAK)
Hybrid module with:
2-port 10GBASE-X (XENPAK)
20-port 1000BASE-X (SFP)
20-port 10/100/1000BASE-T (RJ-45)
Figure 3: Port Capacity
© 2010 Extreme Networks, Inc. All rights reserved.
BlackDiamond 10808—Page 4
Extreme Networks Data Sheet
Target Applications
Enterprise Core
BlackDiamond 10808
BlackDiamond 10808
BlackDiamond 10808 provides the medium to large
enterprise an ideal core switch solution that satisfies
their complete network needs. The CLEAR-Flow
Security Rules Engine and Layer 3 virtual switching
capability of BlackDiamond 10808 has set the bar for
core security.
Summit®
X450e-48t
Summit
X450e-24p
Summit
X350-24t
Summit
X250-48t
BlackDiamond
8810
DEF 3
2ABC
MNO 6
1-@
5ABC WXYZ 9
4GHI
8TUV
#+|
7PQRS
0+|
U
*
Carrier Ethernet Core and Distribution
First Mile Access
Carrier Ethernet networks are typically composed of
three device types—Customer Edge, Provider Edge and
Provider Aggregation. Not all networks will use all three
devices. For example, an IPTV network may be deployed
using only a provider aggregation switch at a provider
point of presence. BlackDiamond 10808 is ideally suited
for either provider aggregation or point of presence
within Carrier Ethernet networks.
Cable
© 2010 Extreme Networks, Inc. All rights reserved.
Point of Presence
BlackDiamond
10808
Service
Router
Summit X450a
FTTN
Ethernet
PON
Wireless
Internet Exchanges
An Internet Exchange Point (IXP) allows different
Internet Service Providers (ISPs) to exchange Internet
traffic between their autonomous systems by means of
mutual peering agreements. IXPs are typically used by
ISPs to reduce dependency on their respective upstream
providers; furthermore, they are used to increase
efficiency and fault-tolerance. BlackDiamond 10808
addresses the need for high-performance and fault-tolerant
connectivity required for IXPs using gigabit and 10
Gigabit Ethernet as the interconnect technology, along
with resiliency technologies such as EAPS.
Central Office
DSL
BlackDiamond
10808
BlackDiamond
10808
Router
Router
EAPS
Router
Router
BlackDiamond
10808
BlackDiamond
10808
BlackDiamond 10808—Page 5
Extreme Networks Data Sheet
Technical Specifications
ExtremeXOS 12.4
Supported Protocols
Switching
•RFC 3619 Ethernet Automatic Protection
Switching (EAPS) and EAPSv2
• IEEE 802.1D – 1998 Spanning Tree Protocol (STP)
•IEEE 802.1D – 2004 Spanning Tree Protocol
(STP and RSTP)
•IEEE 802.1w – 2001 Rapid Reconfiguration for
STP, RSTP
•IEEE 802.1Q – 2003 (formerly IEEE 802.1s)
Multiple Instances of STP, MSTP
•EMISTP, Extreme Multiple Instances of
Spanning Tree Protocol
•PVST+, Per VLAN STP (802.1Q interoperable)
•Draft-ietf-bridge-rstpmib-03.txt – Definitions of
Managed Objects for Bridges with Rapid
Spanning Tree Protocol
•Extreme Standby Router Protocol™ (ESRP)
•IEEE 802.1Q – 1998 Virtual Bridged Local
Area Networks
•IEEE 802.3ad Static load sharing configuration
and LACP based dynamic configuration
•Software Redundant Ports
• IEEE 802.1AB – LLDP Link Layer Discovery
Protocol
•LLDP Media Endpoint Discovery (LLDP-MED),
ANSI/TIA-1057, draft 08
•Extreme Discovery Protocol (EDP)
•Extreme Loop Recovery Protocol (ELRP)
•Extreme Link State Monitoring (ELSM)
•IEEE 802.1ag L2 Ping and traceroute,
Connectivity Fault Management
•ITU-T Y.1731 Frame delay measurements
Management and Traffic Analysis
•RFC 2030 SNTP, Simple Network Time
Protocol v4
•RFC 854 Telnet client and server
•RFC 783 TFTP Protocol (revision 2)
•RFC 951, 1542 BootP
•RFC 2131 BOOTP/DHCP relay agent and
DHCP server
•RFC 1591 DNS (client operation)
•RFC 1155 Structure of Mgmt Information
(SMIv1)
•RFC 1157 SNMPv1
•RFC 1212, RFC 1213, RFC 1215 MIB-II,
Ethernet-Like MIB & TRAPs
•RFC 1573 Evolution of Interface
•RFC 1650 Ethernet-Like MIB (update of RFC
1213 for SNMPv2)
•RFC 1901, 1905 – 1908 SNMP v2c, SMIv2
and Revised MIB-II
•RFC 2576 Coexistence between SNMP
Version 1, Version 2 and Version 3
•RFC 2578 – 2580 SMIv2 (update to
RFC 1902 – 1903)
•RFC 3410 – 3415 SNMPv3, user based
security, encryption and authentication
•RFC 3826 – The Advanced Encryption
Standard (AES) Cipher Algorithm in the SNMP
User-based Security Model
•RFC 1757 RMON 4 groups: Stats, History,
Alarms and Events
•RFC 2021 RMON2 (probe configuration)
•RFC 2613 SMON MIB
© 2010 Extreme Networks, Inc. All rights reserved.
•RFC 2925 Ping/Traceroute MIB
•RFC 2668 802.3 MAU MIB
•draft-ietf-hubmib-mau-mib-v3-02.txt
•RFC 1643 Ethernet MIB
•RFC 1493 Bridge MIB
•RFC 2096 IPv4 Forwarding Table MIB
•RFC 2737 Entity MIB v2
•RFC 2233 Interface MIB
•RFC 3621 PoE-MIB (PoE switches only)
•IEEE 802.1ag MIB
•Secure Shell (SSH-2) client and server
•Secure Copy (SCP-2) client and server
•Secure FTP (SFTP) server
•sFlow version 5
•Configuration logging
•Multiple Images, Multiple Configs
•RFC 3164 BSD Syslog Protocol with Multiple
Syslog Servers
––999 Local Messages (criticals stored
across reboots)
•Extreme Networks vendor MIBs (includes
FDB, PoE, CPU, Memory MIBs)
•XML APIs over Telnet/SSH and HTTP/HTTPS
•Web-based device management interface –
ExtremeXOS ScreenPlay™
•IP Route Compression
•CPU DoS Protection with traffic rate-limiting to
management CPU
•Robust against common Network Attacks:
––CERT (http://www.cert.org)
––CA-2003-04: “SQL Slammer”
––CA-2002-36: “SSHredder”
––CA-2002-03: SNMP vulnerabilities
––CA-98-13: tcp-denial-of-service
––CA-98.01: smurf
––CA-97.28:Teardrop_Land -Teardrop and
“LAND“ attack
––CA-96.26: ping
––CA-96.21: tcp_syn_flooding
––CA-96.01: UDP_service_denial
––CA-95.01: IP_Spoofing_Attacks_and_
Hijacked_ Terminal_Connections
––IP Options Attack
•Host Attacks
––Teardrop, boink, opentear, jolt2, newtear,
nestea, syndrop, smurf, fraggle, papasmurf,
synk4, raped, winfreeze, ping –f, ping of
death, pepsi5, Latierra, Winnuke, Simping,
Sping, Ascend, Stream, Land, Octopus
Security, Switch and
Network Protection
•IP Security – DHCP enforcement via Disable
ARP Learning
•IP Security – Gratuitous ARP Protection
•IP Security – DHCP Secured ARP/ARP
Validation
•Routing protocol MD5 authentication
•Secure Shell (SSH-2), Secure Copy (SCP-2)
and SFTP client/server with encryption/
authentication (requires export controlled
encryption module)
•SNMPv3 user based security, with encryption/authentication (see above)
•RFC 1492 TACACS+
•RFC 2138 RADIUS Authentication
•RFC 2139 RADIUS Accounting
•RFC 3579 RADIUS EAP support for 802.1x
•RADIUS Per-command Authentication
•Access Profiles on All Routing Protocols
•Access Policies for Telnet/SSH-2/SCP-2
•Network Login – 802.1x, Web and
MAC-based mechanisms
•IEEE 802.1x – 2001 Port-Based Network
Access Control for Network Login
•Multiple supplicants with multiple VLANs for
Network Login (all modes)
•Fallback to local authentication database
(MAC and Web-based methods)
•Guest VLAN for 802.1x
•RFC 1866 HTML – Used for Web-based
Network Login and ExtremeXOS ScreenPlay
•SSL/TLS transport – used for Web-based
Network Login and ExtremeXOS ScreenPlay
(requires export controlled encryption module)
•MAC Security – Lockdown and Limit
•IP Security – RFC 3046 DHCP Option 82 with
port and VLAN ID
•IP Security – Trusted DHCP Server
•Layer 2/3/4 Access Control Lists (ACLs)
•RFC 2267 Network Ingress Filtering
•RPF (Unicast Reverse Path Forwarding)
Control via ACLs
•Wire-speed ACLs
•Rate Limiting/Shaping by ACLs
•IP Broadcast Forwarding Control
•ICMP and IP-Option Response Control
•SYN attack protection
Security, Router Protection
Requires Edge License or above
Security Detection and Protection
In Core and Aggregation Products only
•CLEAR-Flow, threshold-based alerts
and actions
IPv4 Host Requirements
•RFC 1122 Host Requirements
•RFC 768 UDP
•RFC 791 IP
•RFC 792 ICMP
•RFC 793 TCP
•RFC 826 ARP
•RFC 894 IP over Ethernet
•RFC 1027 Proxy ARP
•RFC 2068 HTTP server
•IGMP v1/v2/v3 Snooping with Configurable
Router Registration Forwarding
•IGMP Filters
•PIM Snooping
•Static IGMP Membership
•Multicast VLAN Registration (MVR)
IPv4 Router Requirements
Requires Advanced Edge License or above
•RFC 1812 Requirements for IP
Version 4 Routers
•RFC 1519 CIDR
•RFC 1256 IPv4 ICMP Router Discovery (IRDP)
•Static Unicast Routes
•Static Multicast Routes
•RFC 1058 RIP v1
•RFC 2453 RIP v2
•Static ECMP
•RFC 1112 IGMP v1
BlackDiamond 10808—Page 6
Extreme Networks Data Sheet
Technical Specifications
IPv4 Router Requirements
continued
Requires Advanced Edge License or above
•RFC 2236 IGMP v2
•RFC 3376 IGMP v3
•RFC 2933 IGMP MIB
•RFC 2096 IPv4 Forwarding Table MIB
•RFC 1724 RIPv2 MIB
•RFC 2338 VRRP
•RFC 2787 VRRP MIB
•RFC 2328 OSPF v2 (Edge-mode)
•OSPF ECMP
•OSPF MD5 Authentication
•RFC 1587 OSPF NSSA Option
•RFC 1765 OSPF Database Overflow
•RFC 2370 OSPF Opaque LSA Option
•RFC 3623 OSPF Graceful Restart
•RFC 1850 OSPFv2 MIB
•RFC 2362 PIM-SM (Edge-mode)
•RFC 2934 PIM MIB
•RFC 3569, draft-ietf-ssm-arch-06.txt PIM-SSM
PIM Source Specific Multicast
•draft-ietf-pim-mib-v2-o1.txt
•Mtrace, a “traceroute” facility for IP Multicast:
draft-ietf-idmr-traceroute-ipm-07
• Mrinfo, the multicast router information tool
based on Appendix-B of draft-ietf-idmr-dvmrpv3-11
IPv6 Host Requirements
Current support on ExtremeXOS based Summit
series, BlackDiamond 8800 series,
BlackDiamond 10808 series and
BlackDiamond 12800 series
•RFC 5095, Internet Protocol, Version 6
(IPv6) Specification
•RFC 4861, Neighbor Discovery for IP
Version 6, (IPv6)
•RFC 2463, Internet Control Message Protocol
(ICMPv6) for the IPv6 Specification
•RFC 2464, Transmission of IPv6 Packets over
Ethernet Networks
•RFC 2465, IPv6 MIB, General Group and
Textual Conventions
•RFC 2466, MIB for ICMPv6
•RFC 2462, IPv6 Stateless Address Auto
configuration – Host Requirements
•RFC 1981, Path MTU Discovery for IPv6,
August 1996 – Host requirements
•RFC 3513, Internet Protocol Version 6 (IPv6)
Addressing Architecture
•RFC 3587, Global Unicast Address Format
•Telnet server over IPv6 transport
•SSH-2 server over IPv6 transport
•Ping over IPv6 transport
•Traceroute over IPv6 transport
IPv6 Interworking and Migration
Current support on ExtremeXOS based Summit
series, BlackDiamond 8800 series,
BlackDiamond 10808 series and
BlackDiamond 12800 series
•RFC 2893, Configured Tunnels
•RFC 3056, 6to4
© 2010 Extreme Networks, Inc. All rights reserved.
IPv6 Router Requirements
Current support on ExtremeXOS based Summit
series, BlackDiamond 8800 series,
BlackDiamond 10808 series and
BlackDiamond 12800 series
•RFC 2462, IPv6 Stateless Address Auto
configuration – Router Requirements
•RFC 1981, Path MTU Discovery for IPv6,
August 1996 – Router requirements
•RFC 2710, IPv6 Multicast Listener Discovery
v1 (MLDv1) Protocol
•RFC 3810, IPv6 Multicast Listener Discovery v2
(MLDv2) Protocol
•Static Unicast routes for IPv6
•RFC 2080, RIPng
•Static ECMP
Core Protocols for Layer 2, IPv4
and IPv6
•Draft-ietf-isis-ipv6-06 Routing IPv6 with
IS-IS – Current support on Summit series with
Core License or above, BlackDiamond 8800
series, BlackDiamond 10808 series, and
BlackDiamond 12800 series
•Draft-ietf-isis-wg-multi-topology-11 Multi
Topology (MT) Routing in IS-IS
QoS and VLAN Services
Quality of Service and Policies
•IEEE 802.1D – 1998 (802.1p) Packet Priority
•RFC 2474 DiffServ Precedence, including
8 queues/port
•RFC 2598 DiffServ Expedited Forwarding (EF)
•RFC 2597 DiffServ Assured Forwarding (AF)
•RFC 2475 DiffServ Core and Edge
Router Functions
VLAN Services: VLANs, vMANs
•IEEE 802.1Q VLAN Tagging
Requires Core License or above
•IEEE 802.1v: VLAN classification by Protocol
and Port
•EAPSv2 Shared Ports – multiple interconnec•Port-based VLANs
tions between rings
•PIM-DM Draft IETF PIM Dense Mode draft-ietf- •Protocol-based VLANs
•MAC-based VLANs
idmr-pim-dm-05.txt, draft-ietf-pim-dm-new•Multiple STP domains per VLAN
v2-04.txt
•Upstream Forwarding Only/Disable Flooding
•RFC 3618 Multicast Source Discovery
•RFC 5517 Private VLANs
Protocol (MSDP)
•VLAN Translation
•RFC 3446 Anycast RP using PIM and MSDP
•IEEE 802.1ad Provider Bridge Network, virtual
•RFC 2740 OSPFv3, OSPF for IPv6 – Current
MANs (vMANs)
support on Summit series with Core License or
•vMAN Ethertype Translation/Secondary
above, BlackDiamond 8800 series,
vMAN Ethertype
BlackDiamond 10808 series, and
•Multicast Support for PVLAN
BlackDiamond 12800 series
•Multicast Support for VLAN Aggregation
•RFC 1771 Border Gateway Protocol 4
•RFC 1965 Autonomous System Confederations •VLAN Aggregation (Requires Advanced Edge
License or above)
for BGP
•RFC 2796 BGP Route Reflection (supersedes
Advanced VLAN Services, MAC-in-MAC
RFC 1966)
Requires Advanced Edge License or above
•RFC 1997 BGP Communities Attribute
(BlackDiamond 10808 and
•RFC 1745 BGP4/IDRP for IP-OSPF Interaction
BlackDiamond 12800 series only)
•RFC 2385 TCP MD5 Authentication for BGPv4 •VLAN Translation in vMAN environments
•RFC 2439 BGP Route Flap Damping
•vMAN Translation
•RFC 2918 Route Refresh Capability for BGP-4 •IEEE 802.1ah/D1.2 Provider Backbone
•RFC 3392 Capabilities Advertisement
Bridges (PBB)/MAC-in-MAC
with BGP-4
• RFC 4360 BGP Extended Communities Attribute
MPLS and VPN Services
•RFC 4486 Subcodes for BGP Cease
Multi-Protocol Label Switching (MPLS)
Notification message
Requires MPLS Layer 2 Feature Pack License
•draft-ietf-idr-restart-10.txt Graceful Restart
•RFC 2961 RSVP Refresh Overhead
Mechanism for BGP
Reduction Extensions
•RFC 4760 Multiprotocol extensions for BGP-4
•RFC
3031 Multiprotocol Label Switching
•RFC 1657 BGP-4 MIB
Architecture
•Draft-ietf-idr-bgp4-mibv2-02.txt – Enhanced
•RFC 3032 MPLS Label Stack Encoding
BGP-4 MIB
•RFC 1195 Use of OSI IS-IS for Routing in TCP/IP •RFC 3036 Label Distribution Protocol (LDP)
•RFC 3209 RSVP-TE: Extensions to RSVP for
and Dual Environments (TCP/IP transport only)
LSP Tunnels
•RFC 2763 Dynamic Hostname Exchange
•RFC
3630 Traffic Engineering Extensions
Mechanism for IS-IS
to OSPFv2
•RFC 2966 Domain-wide Prefix Distribution with
•RFC 3811 Definitions of Textual Conventions
Two-Level IS-IS
(TCs) for Multiprotocol Label Switching
•RFC 2973 IS-IS Mesh Groups
(MPLS) Management
•RFC 3373 Three-way Handshake for IS-IS
•RFC 3812 Multiprotocol Label Switching
Point-to-Point Adjacencies
(MPLS) Traffic Engineering (TE) Management
•RFC 3784 IS-IS Externs for Traffic Engineering
Information Base (MIB)
(wide metrics only)
•RFC
3813 Multiprotocol Label Switching
•Draft-ietf-isis-restart-02 Restart Signaling
(MPLS) Label Switching Router (LSR) Managefor IS-IS
ment Information Base (MIB)
BlackDiamond 10808—Page 7
Extreme Networks Data Sheet
Technical Specifications
MPLS and VPN Services
continued
Multi-Protocol Label Switching (MPLS)
Requires MPLS Layer 2 Feature Pack License
•RFC 3815 Definitions of Managed Objects for
the Multiprotocol Label Switching (MPLS),
Label Distribution Protocol (LDP)
•RFC 4090 Fast Re-route Extensions to
RSVP-TE for LSP (Detour Paths)
•RFC 4379 Detecting Multi-Protocol Label
Switched (MPLS) Data Plane Failures (LSP Ping)
Layer 2 VPNs
Requires MPLS Layer 2 Feature Pack License
•RFC 4447 Pseudowire Setup and Maintenance
Using the Label Distribution Protocol (LDP)
•RFC 4448 Encapsulation Methods for
Transport of Ethernet over MPLS Networks
• RFC 4762 Virtual Private LAN Services (VPLS)
using Label Distribution Protocol (LDP) Signaling
•RFC 5085 Pseudowire Virtual Circuit
Connectivity Verification (VCCV)
•draft-ietf-bfd-base-09.txt Bidirectional
Forwarding Detection
•RFC 5542 Definitions of Textual Conventions
for Pseudowire (PW) Management
•RFC 5601 Pseudowire (PW) Management
Information Base (MIB)
•RFC 5602 Pseudowire (PW) over MPLS PSN
Management Information Base (MIB)
•RFC 5603 Ethernet Pseudowire (PW)
Management Information Base (MIB)
• draft-ietf-l2vpn-vpls-mib-02.txt Virtual Private LAN
Services (VPLS) Management Information Base
General Specifications
Switching Capacity
•1.28 Tbps total switching capacity, with 9
microsecond latency for 64-byte packets
Port Capacity
•48 ports of 10 Gigabit Ethernet
•480 1000BASE-X SFP ports
•480 10/100/1000BASE-T ports
•Future support for the emerging 40 and
100 Gigabit Ethernet standards
Management Switch Module
Management Switch Module Options
Management modules contain both the control
plane as well as the switch fabric for the
BlackDiamond 10808. Both MSMs are TCAMbased, and support Longest Prefix Match (LPM)
routing. Two initial versions of MSM are available:
•MSM-1: The MSM-1 includes support for up to
112,000 MAC addresses, 112,000 IP, routes
and 64,000 ACLs. MSM-1 is designed for
most mid-sized to large enterprises. MPLS is
not supported on the MSM-1
•MSM-1XL: The MSM-1XL includes support for
up to 224,000 MAC addresses, 224,000
Layer 3 LPM Entries, and 128,000 ACLs.
MSM-1XL is required to run MPLS
© 2010 Extreme Networks, Inc. All rights reserved.
I/O Module Options
G60T
60-port 10/100/1000BASE-T Gigabit Ethernet
module (RJ-45)
G60X
60-port 1000BASE-X Gigabit Ethernet module
•SFP modules required. SFP options include:
–– SX (up to 550m)
–– LX (up to 5km as per standard; up to 10km
with 2 Extreme Networks optics)
–– ZX (up to 70km)
G20X
20-port 1000BASE-X Gigabit Ethernet module
•SFP modules required. SFP options include:
–– SX (up to 550m)
–– LX (up to 5km as per standard; up to 10km
with 2 Extreme Networks optics)
–– ZX (up to 70km)
10G6X
6-port 10 Gigabit Ethernet module
•XENPAK modules required. XENPAK
options include:
–– SR (up to 300m)
–– LR (up to 10km)
–– ER (up to 40km)
–– ZR (up to 80km)
–– LX4 (up to 300m MMF, 10km SMF)
10G2X
2-port 10 Gigabit Ethernet module
•XENPAK modules required. XENPAK
options include:
–– SR (up to 300m)
–– LR (up to 10km)
–– ER (up to 40km)
–– ZR (up to 80km)
–– LX4 (up to 300m MMF, 10km SMF)
10G2H Hybrid module with:
2-port 10 gigabit
•XENPAK modules required. XENPAK
options include:
–– SR (up to 300m)
–– LR (up to 10km)
–– ER (up to 40km)
–– ZR (up to 80km)
–– LX4 (up to 300m MMF, 1 km SMF)
20-port 1000BASE-X Gigabit Ethernet
•SFP modules required. SFPoptions include:
–– SX (up to 550m)
–– LX (up to 5km as per standard; up to 10km
with 2 Extreme Networks optics)
–– ZX (up to 70km)
20-port 10/100/1000BASE-T Gigabit
Ethernet (RJ-45)
Physical Specifications
Dimensions
Chassis:
38.5” high (22 RU) x 17.3” wide x 21” deep
(98.0 cm x 44.0 cm x 53.3 cm)
MSM Module Dimensions:
22.7” high x 17.9” deep x 1.7” width
(57.7 cm x 45.5 cm x 4.3 cm)
I/O Module Dimensions:
22.7” high x 19.6” deep x 1.7” width
(57.7 cm x 49.8 cm x 4.3 cm)
Weight
Empty Chassis: 105 lb (47.7 kg)
Power Supply: 7 lb (3.2 kg)
MSM-1 Module: 10.5 lb (4.8 kg)
MSM-1XL Module: 10.7 lb (4.9 kg)
G60T Module: 8.5 lb (3.9 kg)
G60X Module: 9.25 lb (4.2 kg)
G20X Module: 9.25 lb (4.2 kg)
10G6X Module: 7.75 lb (3.5 kg)
10G2X Module: 7.75 lb (3.5 kg)
10G2H Module: 8.5 lb (3.9 kg)
Chassis, fully loaded (max.): 242 lb (110 kg)
Power
Chassis with Fan Trays: 250W, 48V, 5.2A
(Heat Dissipation: 853 BTU)
MSM-1, MSM-1XL: 335W, 48V, 7.0A
(Heat Dissipation: 1144 BTU)
G60T: 220W, 48V, 4.6A
(Heat Dissipation: 751 BTU)
G60X: 223W, 48V, 4.7A
(Heat Dissipation: 761 BTU)
G20X: 140W, 48V, 2.9A
(Heat Dissipation: 478 BTU)
10G6X: 230W, 48V, 4.8A
(Heat Dissipation: 785 BTU)
10G2X: 145W, 48V, 3.0A
(Heat Dissipation: 495 BTU)
10G2H: 223W, 48V, 4.7A
(Heat Dissipation: 761 BTU)
Fully Loaded System
(Chassis + 2 x MSM + 8 x 10G6X): 2760W
(Heat Dissipation: 9,421 BTU)
Operating Specifications
Operating Temperature: 0° to 40° C
Storage Temperature: -40° to 70° C
Operating Humidity: 10% to 95% relative
humidity, non-condensing EN60068 to Extreme
IEC68 schedule
Power Supply Options
Both AC and DC power supplies are available.
•AC power supplies can run from 100Volt to
240Volt, and deliver
–– 700W at 90V to 110V, or
–– 1200W at 200V to 220V
• 48V DC power supplies deliver 1200W of power
BlackDiamond 10808—Page 8
Extreme Networks Data Sheet
Technical Specifications
Regulatory/Safety
EMI/EMC Standards
Environmental Standards
Safely Standards
•FCC 47 CFR Part 15 Class A (U.S. Emissions)
•ICES-003 Class A (Canada Emissions)
•89/336/EEC EMC Directive
(European Requirements)
•CISPR22:1997 Class A
(International Emissions)
•EN55022:1998 Class A (European Emissions)
•EN55024:1998 includes EN61000-42,3,4,5,6,8,11 (European Immunity)
•EN61000-3-2,3 (European Harmonics & Flicker)
•AS/NZS 3548 (Australia Emissions)
•VCCI Class A (Japan Emissions)
•CNS 13438:1997 Class A (Taiwan Emissions)
•MIC Mark (Korean Emissions &
Immunity Approval)
•NOM/NYCE (Mexican Product Safety &
EMC Authorities)
•Telcordia GR-1089 (Bellcore Emissions &
Immunity Standard)
•EN60068 to Extreme IEC68 schedule
•ETS 300 019 to Extreme schedule
•Telcordia GR-63-Core (Bellcore Environmental
& Safety Standard)
•UL 1950 3rd Edition 2/93,
(U.S. Safety of ITE)
•cULus Listed Equivalent to CAN/CSA-22.2
•No. 950-M93 (Canadian Safety of ITE)
•Low Voltage Directive (LVD)
(European Safety Directive)
•CB Report and Certificate
(International Safety of ITE)
•IEC60950:1991/A1-4 2nd Edition
(European Safety of ITE)
•TUV GS Mark (German Notified Body)
•EN60950:1992/A1-4,A11+ Deviations
(European Safety of ITE)
•S/NZS 3260 (Australia Safety Standard)
•S Mark (Argentina Safety Approval)
•GOST (Russian Federation Certificate)
Laser Devices
•EN60825-1,2:1994, A11:1996
(European Safety of Lasers Products)
•FCC 21 CFR Subpart J
(U.S. Safety of Laser Products)
•CDRH Letter of Approval (U.S. FDA Approval)
© 2010 Extreme Networks, Inc. All rights reserved.
Warranty
•Ltd. 1-year on Hardware
•90-days on Software
•For warranty details, visit
www.extremenetworks.com/go/warranty
Telecom Standards
•EN 300 386-2 v1.1.3 (1997-12)
(European Telecom Standard)
BlackDiamond 10808—Page 9
Extreme Networks Data Sheet
Ordering Information
Part
Number
Name
Description
60011
BlackDiamond 10808 Chassis
BlackDiamond 10808 10-slot Chassis (Includes Fan Tray)
60020
BlackDiamond 10808 /
BlackDiamond 8800
700W/1200W PSU
BlackDiamond 10808/BlackDiamond 8800 700W/1200W 100-240V PSU
60021
BlackDiamond 10808 /
BlackDiamond 8800 1200W
DC PSU
BlackDiamond 10808/BlackDiamond 8800 1200W -48V DC PSU
60015
BlackDiamond 10808 MSM-1
Mgmt Module
BlackDiamond 10808 Management and Switch Fabric Module 1
60016
BlackDiamond 10808 MSM-1XL
Mgmt Module
BlackDiamond 10808 Management and Switch Fabric Module 1XL
61010
BlackDiamond 10808 G60X
BlackDiamond 10808 60-port 1000BASE-X SFP Module
61011
BlackDiamond 10808 G20X
BlackDiamond 10808 20-port 1000BASE-X SFP Module
61030
BlackDiamond10808 G60T
BlackDiamond 10808 60-port 10/100/1000BASE-T RJ-45 Module
61050
BlackDiamond 10808 10G6X
BlackDiamond 10808 6-port 10GBASE-X XENPAK Module
61051
BlackDiamond 10808 10G2X
BlackDiamond 10808 2-port 10GBASE-X XENPAK Module
61071
BlackDiamond 10808 10G2H
BlackDiamond 10808 hybrid module with
- 2-port 10GBASE-X XENPAK
- 20-port 1000BASE-X SFP
- 20-port 10/100/1000BASE-T RJ-45
60012
BlackDiamond 10808 Spare
Fan Tray
BlackDiamond 10808 Spare Fan Tray
60013
BlackDiamond 10808 Spare PSU
Controller
BlackDiamond 10808 Spare PSU Controller
62001
BlackDiamond 10808 Blank
Front Panel
BlackDiamond 10808 Blank Front Panel
62011
BlackDiamond 10808 Mid
Mount Kit
BlackDiamond 10808 Mid Mount Kit
62012
BlackDiamond 10808 Spare Filter
3-pack
BlackDiamond 10808 Spare Filter 3-pack
62020
BlackDiamond 6808/10808 Cable
Mgmt
BlackDiamond 6808/10808 Cable Management
86101
Universal Port Feature Pack
ExtremeXOS Universal Port Feature Pack
10110
SR XENPAK
10 Gigabit Ethernet XENPAK Transceiver, 850nm, up to 300m on multimode fiber, SC
connector
10111
LR XENPAK
10 Gigabit Ethernet XENPAK Transceiver, 1310nm, up to 10km on single-mode fiber, SC
connector
10112
ER XENPAK
10 Gigabit Ethernet XENPAK Transceiver, 1550nm, up to 40km on single-mode fiber, SC
connector
10113
ZR XENPAK
10 Gigabit Ethernet XENPAK Transceiver, 1550nm, up to 80km on single-mode fiber, SC
connector
10114
LX4 XENPAK
10 Gigabit Ethernet WWDM XENPAK Transceiver, 1310nm, up to 300m on
multi-mode fiber and up to 10 km on a single-mode fiber, SC connector
10051
SX SFP
SFP, 1000BASE-SX, LC Connector
10052
LX SFP
SFP, 1000BASE-LX, LC connector
10053
ZX SFP
SFP, Extra long distance SMF 70 Km/21 dB budget, LC connector
© 2010 Extreme Networks, Inc. All rights reserved.
BlackDiamond 10808—Page 10
Extreme Networks Data Sheet
Corporate
and North America
Extreme Networks, Inc.
3585 Monroe Street
Santa Clara, CA 95051 USA
Phone +1 408 579 2800
Europe, Middle East, Africa
and South America
Phone +31 30 800 5100
Asia Pacific
Phone +65 6836 5437
Japan
Phone +81 3 5842 4011
© 2010 Extreme Networks, Inc. All rights reserved. Extreme Networks, the Extreme Networks logo, BlackDiamond, EPICenter, Extreme Standby Router Protocol, ExtremeXOS,
ExtremeXOS Screenplay, Sentriant and Summit are either registered trademarks or trademarks of Extreme Networks, Inc. in the United States and/or other countries. sFlow is the
property of InMon Corporation. Specifications are subject to change without notice. 1024_09 03/10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising