advertisement
» Kontron Configuration Guide «
CG2300 Carrier Grade Server
Document Revision 1.05
www.kontron.com
Revision History
Revision Brief description of changes
1.00 First release
Date of issue
02/02/2015
1.01 Correction to some contact information
1.02
1.03
Updated link to Kontron website
Base system is CG2300-00
SAS cables and PDB added as Spare Parts
Details added concerning no CG2300 RAID Cable Kit vs CG2200
Notes for DDR4 – RDIMM/LRDIMM – No UDIMM support
Precisions added about Remote Management Module
Adding DC connector kit as Spare part
Adding note about getting a crimper tool to build DC power cable
09/02/2015
16/06/2015
04/12/2015
1.04 Internal Release 31/03/2016
1.05
Customer Service
Contact Information:
Adding Broadwell CPU
Adding Notes about Single PSU or single CPU config (SDR reprogrammation) in Table 1.
Modification to Table 1 Step 7(RAID).
Modification to Table 3 (RAID components)
Top Cover kit added in Spare Parts
Picture added for SAS cable as Spare Part
Changed ordering number (4-4) for PDB as Spare Part
Modification to rack mount section (section M and Appendix A) to:
- include rail extenders
- reorganize informations
Kontron America, Inc.
14118 Stowe Drive
Poway, CA 92064-7147
USA
Tel.: +1 888 294 4558
Fax:+1 858 677 0898
E-mail: [email protected]
Visit our site at: www.kontron.com
20/04/2016
Kontron Europe GmbH
Lise-Meitner-Str. 3-5
86156 Augsburg
Germany
Tel.: +800-KONTRONAG
Tel.: +49 821 4086 888
E-mail: [email protected]
2 www.kontron.com
3
Copyright © 2016 Kontron America Inc.
All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the express written permission from
Kontron.
Customer Comments
If you have any difficulties using this user's guide, discover an error, or just want to provide some feedback, please send a message to Kontron. Detail any errors you find. We will correct the errors or problems as soon as possible and post the revised user's guide on our website. Thank you.
Acronyms
RoHS
SAS
SATA
SD
SKU
SSD
SW
THOL
TOC
ETSI eUSB
FH/FL
Gbe
GHz
HDD
HW
KVM
AC
CPU
CRMS
DC
DDR4
DIMM
EIA
ESD
Alternating Current
Central Processing Unit
Communications Rack Mount Servers
Direct Current
Double Data Rate Fourth Generation
Dual In-Line Memory Module
Electronic Industries Alliance
Electrostatic discharge
European Telecommunications Standards Institute
Embedded Universal Serial Bus
Full Height/Full Length
Gigabit Ethernet
Gigahertz
Hard Disk Drive
Hardware
Kernel-based Virtual Machine
LP
NEBS
NIC
OSS
PCI Peripheral Component Interconnect
PCI-E Gen 3 Peripheral Component Interconnect Express, Third Generation
PSU
RAID
RDIMM
RMM
Low Profile
Network Equipment-Building System network interface controller
Operations System and Support
Power Supply Unit
Redundant Array of Independent Disks
Remote Management Module
Registered Dual In-Line Memory Module
Restriction of Hazardous Substances
Stock keeping unit
Solid State Drive
Table of Content
Serial Attached SCSI (Small Computer System Interface)
Serial Advanced Technology Attachment
Secure Digidal
Software
Tested Hardware and Operating System List
www.kontron.com
4
Contents
List of Figures
List of Tables
www.kontron.com
5
Electrostatic Discharge
CAUTION!
The CG2300 is sensitive to electrostatic discharge (ESD). Users must observe the appropriate precautions when handling ESD-sensitive devices.
Limited Warranty
Kontron grants the original purchaser of Kontron's products a THREE YEAR LIMITED HARDWARE WARRANTY as described in the following. However, no other warranties that may be granted or implied by anyone on behalf of Kontron are valid unless the consumer has the express written consent of Kontron.
Kontron warrants their own products, excluding software, to be free from manufacturing and material defects for a period of 36 consecutive months from the date of purchase. This warranty is not transferable nor extendible to cover any other users or long- term storage of the product. It does not cover products which have been modified, altered or repaired by any other party than Kontron or their authorized agents. Furthermore, any product which has been, or is suspected of being damaged as a result of negligence, improper use, incorrect handling, servicing or maintenance, or which has been damaged as a result of excessive current/voltage or temperature, or which has had its serial number(s), any other markings or parts thereof altered, defaced or removed will also be excluded from this warranty.
If the customer's eligibility for warranty has not been voided, in the event of any claim, he may return the product at the earliest possible convenience to the original place of purchase, together with a copy of the original document of purchase, a full description of the application the product is used on and a description of the defect. Pack the product in such a way as to ensure safe transportation (see our safety instructions).
Kontron provides for repair or replacement of any part, assembly or sub-assembly at their own discretion, or to refund the original cost of purchase, if appropriate. In the event of repair, refunding or replacement of any part, the ownership of the removed or replaced parts reverts to Kontron, and the remaining part of the original guarantee, or any new guarantee to cover the repaired or replaced items, will be transferred to cover the new or repaired items. Any extensions to the original guarantee are considered gestures of goodwill, and will be defined in the "Repair Report" issued by Kontron with the repaired or replaced item.
Kontron will not accept liability for any further claims resulting directly or indirectly from any warranty claim, other than the above specified repair, replacement or refunding. In particular, all claims for damage to any system or process in which the product was employed, or any loss incurred as a result of the product not functioning at any given time, are excluded. The extent of Kontron liability to the customer shall not exceed the original purchase price of the item for which the claim exists.
Kontron issues no warranty or representation, either explicit or implicit, with respect to its products reliability, fitness, quality, marketability or ability to fulfill any particular application or purpose. As a result, the products are sold "as is," and the responsibility to ensure their suitability for any given task remains that of the purchaser. In no event will Kontron be liable for direct, indirect or consequential damages resulting from the use of our hardware or software products, or documentation, even if Kontron were advised of the possibility of such claims prior to the purchase of the product or during any period since the date of its purchase.
Please remember that no Kontron employee, dealer or agent is authorized to make any modification or addition to the above specified terms, either verbally or in any other form, written or electronically transmitted, without the company's consent.
www.kontron.com
6
1. Introduction
A. Product Description
The CG2300 Carrier Grade Server is the 7th generation of Kontron’s 2U Carrier Grade Server products. The CG2300 supports the Intel® Xeon® E5-2600 v3 and v4 series processors, coupling high performance with power efficiency to provide improved performance-per-watt over previous-generation rack-mount servers.
The CG2300 is designed to meet NEBS-3 and ETSI certification which is suited for a host of applications in the telecom Central Office and industrial environment. The server is targeted to OSS (Operations System and Support), Billing, Provisioning, Softswitch, Media Server, Wireless and Unified Messaging,
Call Center and many other applications. It can also support manufacturing, industrial, oil & gas, utility and even military applications where a rugged, highly reliable server is required for harsh environments such as dust, high altitude, fire hazard, earthquake propensity, and high ambient temperatures.
To add to the many recognized benefits of Kontron’s Carrier Grade Server family, the CG2300 introduces several new important features such as support of
Intel Haswell and Broadwell processors, DDR4 memory, PCI-E Gen3, hot-swap/redundant fans and many flash storage formats (SD, eUSB, M.2).
More detailed product information on the CG2300 is available on Kontron’s website at: http://www.kontron.com/products/systems/telecom-systems/cg2300-carrier-grade-rackmount-server.html
B. Purpose of this Document
This document serves as an ordering reference guide, providing details on what parts are available from Kontron for the CG2300 Carrier Grade Server and its associated accessories and spares. Included are the necessary order codes and other important configuration information related to the ordering of the product.
Supported third-party components are not covered by this document, and may be found in the Tested Hardware and Operating System List (THOL) of the
CG2300.
www.kontron.com
7
C. General Flow for Configuring a CG2300 System
Table 1: Configuration Flow
Step
A. Start with Base System
B. Select quantity of power supply and input type (AC or DC)
C. Select quantity and type of CPUs
D. Heatsink
E. Select left and right PCIe Risers
F. Select RAID
G. Select Storage
H. Select Memory
I. Select Remote Management
J. Select System Mounting
Implication NOTE or Reference info
NOTE: No PSU included
Redundant (2) or non-redundant (1)
Type: AC or DC
NOTE:
1- If non-redundant, add a PSU filler.
2- SDR reconfig required for nonredundant config, see Installation
& Maintenance Guide 1.3 or higher, section 7.2 (Single PSU)
CPU quantity determines:
number of PCIe slots available
number of DIMM slots available
See Table 5 below
NOTE: SDR reconfig required for single
CPU config, see Installation &
Maintenance Guide 1.3 or higher, section 7.2 (Single CPU)
CPU type impacts performance See Technical Product Specification
NOTE: Two CPU heatsinks shipped with
Base System.
Determines number of slots &PCIe bus width (One x16 or two x8)
On-board controller or external PCIe
RAID card (for Battery Backup functionality)
On-board:
- 0/1/10 included + 5/50 through the upgrade key AXXRPFKHY5
External PCIe RAID card:
- refer to THOL or section I. below.
- No additional cable kit required.
See THOL SAS, SATA SSD, M.2, SD Card and/or eUSB
Sized for the application
Basic or Advanced features
(Advanced = Integrated KVM and
Media Redirection)
Rack mount kits
Refer to Tested Memory List for list of validated DIMMs
DDR4 - RDIMM or LRDIMM only.
No UDIMM support.
Refer to Installation & Maintenance
Guide for installation instructions
NOTE: Dedicated server management
NIC port is built-in (motherboard).
Basic = built-in
Advanced = Activation key required
Refer to Section M. and Appendix A
www.kontron.com
8
2. Ordering CG2300 Systems
This section includes important information regarding how to order CG2300 systems. Please be familiar with each of these areas before placing an order.
D. CG2300 Base System
Table 2: CG2300 Base System SKU
Product Code
CG2300-00
Description
Min. Order
Qty.
CG2300 Carrier Grade Server
Base System
(PSU not included)
1
The CG2300 system SKU is ordered using the Product Code as the order number. The above SKU is “Base System” SKU—meaning it does not include PSUs, processors, memory, hard drives, power cord, operating system, or plug-in adapters. Those components should be ordered separately as Accessories from
Kontron or from third party vendors listed in the Tested Hardware and Operating System List (THOL).
www.kontron.com
9
See the CG2300 Base System table below for a list of components included. Notice that there are a number of optional accessory items which must be ordered separately.
Table 3: CG2300 Base System Components
Component Description
Chassis (sheet metal, top cover, PCI cages, air duct, interconnection cables, misc. parts)
Baseboard S2600CW2SK, power distribution board, system boards, fans, interconnect cables
AC power supply (850W)
AC Configuration
1 included
DC Configuration
Included
DC power supply (850 W)
Power Cable (AC)
Power Cable (DC)
Power Distribution Board
Power Supply Filler Panel
Bezel
DIMM memory slots (memory not included).
Bays for hot-swap 2.5” Hard Disk Drives and drive carriers
Rear Panel GbE NIC ports (via motherboard)
On-board (HW) RAID 0/1/10
On-board controller RAID 5 Key
Hardware RAID cable kit
HW RAID Adapter, optional battery backup
HW RAID battery mounting bracket
Basic Remote Management Features
Advance Remote Management Features (RMM4Lite)
Right side Dual slot PCIe x8 passive riser
Right side Single slot PCIe x16 passive riser
Left side Single slot PCIe X16 passive riser
Left side Dual slot PCIe x8 passive riser
Rack Mount Kits
SD Flash Module
Kontron Deployment Assistant on SD Flash media
Rail Enabling Kit
Processor
Heatsink
RDIMM/LRDIMM DDR4 Memory
Hard Disk Drives (SAS or SATA SSD) eUSB Flash Drive
M.2 Flash Drive
1
Refer to AC power cord accessory in this section
2
Refer to step E and I in this section
3
Refer to “Rack Mounting Options” in Appendix A
4
Should be purchased separately (refer to THOL and TML)
None included with base system, To be ordered:
1 or 2 per system
-
-
None included with Base
System, To be ordered:
1 or 2 per system
Not included Purchase separately
1
Not included DC mating connector and pins included with DC PSU.
No power cable included.
Must procure and build cable, see Installation and
Maintenance Manual
1 included
None included with Base System
Order 1 if you order only one PSU
1 included
16 slots available
6 included
2 ports available
Included
Purchase separately from Intel
Included, use same cables (built-in)
Purchase separately
4
Optional Accessory
2
Included
Optional Accessory
2
Optional Accessory
2
Optional Accessory
2
Optional Accessory
2
Optional Accessory
2
Optional Accessory
3
1 Included
1 Included
Optional Accessory
3
Purchase separately, refer to Table 5
2 Included
Purchase separately
4
Purchase separately
4
Purchase separately
4
Purchase separately
4
www.kontron.com
10
E. Select the Quantity and Type of Power Supply
The CG2300 System accommodates up to two power supply units. Order one (non-redundant) or two (redundant) PSUs. If a single PSU is used per system, you must order a PSU Filler panel (to respect forced airflow principle).
You must order either AC or DC, no AC-DC mix is possible.
Order same quantity of AC power cords to agree with the quantity of AC power supplies in the final system.
Because DC power input cabling is usually custom, no DC power cord is offered. Each DC PSU contains a DC mating connector kit (housing/backshell and connection pins) for terminating DC input power. Proper wiring and crimper tool, which is to be provided by installer/customer, must be planned in order to build DC power cable. See Installation and Maintenance Manual for details.
DC mating connector kit can be ordered as spare/supplementary part, PN 1059-8642. It is a good practice to order at least one spare kit to prevent running short of contact pins when building the DC cable. See section 3 (Ordering CG2300 Serviceable Items)) below.
Table 4: Power Supply Options
Product Code
1056-8389
Description
Products
Supported
Included in Base Model
(Y/N)
Min. Order Qty
AC Power Supply
CG2300 N
1 (for AC system)
1056-8385
DC Power Supply
Includes input power connector and pins.
Wiring and crimper tool to be provided by installer/customer.
CG2300 N
1 (for DC system)
www.kontron.com
K00837-001
PSU Filler Panel
CG2300,
CG2200
N
1
(order one if nonredundant system)
1-340000-0
AC Power Cord*
Should be ordered by North America customers. International customers should procure their specific power cords directly.
All CRMS servers
N
1 (AC system only)
* Power cords are not included with the system. For AC Power cords, order the above North American power cable using the provided product code. This power cable is RoHS-compliant.
11 www.kontron.com
12
F. Select Quantity and Type of CPUs
The CG2300 is designed to support the following processor SKUs from the Intel
®
Xeon
®
processor E5-2600 series. The CG2300 Base System includes no
CPUs. Customer must separately purchase CPU 1 and 2.
Table 5: Intel® Xeon® Processors Supported by the CG2300
Processor Number Cores
E5-2608L v3
E5-2618L v3
E5-2628L v3
E5-2648L v3
E5-2658 v3
E5-2680 v3
E5-2608L v4
E5-2618L v4
E5-2628L v4
E5-2648L v4
E5-2658 v4
6
8
10
12
12
12
8
10
12
14
14
Speed TDP Memory Speed Support Kontron P/N
Embedded Family
(5-7 years availability/support)
2.0 GHz
2.3 GHz
2.0 GHz
1.8 GHz
2.2 GHz
2.5 GHz
1,6 GHz
2,2 GHz
1,9 GHz
1,8 GHz
2,3 GHz
52 W
75 W
75 W
75 W
105 W
120 W
Codename Haswell-EP
DDR4-1866MHz
DDR4-1866MHz
DDR4-1866MHz
DDR4-2133MHz
DDR4-2133MHz
DDR4-2133MHz
50 W
Codename Broadwell-EP
DDR4-1866MHz
75 W
75 W
75 W
105 W
DDR4-2133MHz
DDR4-2133MHz
DDR4-2400MHz
DDR4-2400MHz
1056-9896
1056-9889
1056-8325
1056-9887
1056-8322
1056-9917
1060-3155
1060-3158
1060-3160
1060-3162
1060-3164
Intel P/N (tray)
CM8064402033500
CM8064401610301
CM8064401547200
CM8064401546007
CM8064401545904
CM8064401439612
CM8066002045102
CM8066002061300
CM8066002044903
CM8066002189001
CM8066002044801
Server Family
E5-2623 v3
E5-2670 v3
E5-2683 v3
E5-2690 v3
E5-2695 v3
E5-2698 v3
4
12
14
12
14
16
3.0 GHz
2.3 GHz
2.0 GHz
2.6 GHz
2.3 GHz
2.3 GHz
Codename Haswell-EP
105 W
120 W
120 W
135 W
120 W
DDR4-1866MHz
DDR4-2133MHz
DDR4-2133MHz
DDR4-2133MHz
DDR4-2133MHz
135 W DDR4-2133MHz
Codename Broadwell-EP
120 W
135 W
120 W
DDR4-2400 MHz
DDR4-2400 MHz
DDR4-2400 MHz
1056-9909
1056-9905
1056-9900
1056-9907
1056-9902
1056-9904
CM8064401832000
CM8064401544801
CM8064401609728
CM8064401439416
CM8064401438110
CM8064401609800
E5-2683 v4
E5-2690 v4
E5-2695 v4
16
14
18
2.1 GHz
2.6 GHz
2.1 GHz
1060-3167
1060-3169
1060-3171
CM8066002023604
CM8066002030908
CM8066002023801
E5-2698 v4 20 2.2 GHz 135 W DDR-2400 MHz 1060-3173 CM8066002024000
Notes:
The above processors in the Embedded family are on Intel’s long life roadmap and are recommended with the CG2300 for highest performance and long availability and support.
More specifically, the E5-2628L v3, E5-2648L v3 and E5-2658 v3 where successfully tested against NEBS Operating Temperature.
The above processors in the Server family are appropriate for applications that are not specifically requiring the stringent NEBS (Operating
Temperature) requirements compliancy or long life support.
These processors are orderable from Kontron or Intel using the indicated part numbers.
Use of the above processors requires passive heatsink. Two heatsinks are included in the Base System, no need to order separately.
www.kontron.com
G. Heat Sink
The CG2300 Base System is delivered with two CPU heatsinks.
This heatsink design was done by Kontron for specific use in the CG2300 system.
In order to obtain best CPU and DIMM thermal performance, Kontron does not recommend using any other heatsink model.
If a heatsink requires replacement, please use product code found in the Serviceable Items section below.
H. Select PCIe Risers
This diagram shows the PCI riser physical arrangement. The CG2300 Base System comes with no risers, but can support the addition of two (2) risers, a rightside and a left-side riser.
Figure 1: PCIe Riser Options
13
Please note that in the diagram above, the three Low Profile PCIe slots are available only when both CPU 1 and CPU 2 are populated.
PCIe risers are NOT included in the Base system.
www.kontron.com
14
Additional Full-height full-length PCIe slots are made available with the purchase of risers. The following risers are available:
Table 6: PCIe Riser Options
Product Order Code
CG2200-RISER2SX8R
Description Min. Order Qty
Right side Dual slot PCI-e x8 Gen 3 passive riser 1
Choose one for Right side
CG2200-RISER1SX16R
Right side Single slot PCI-e x16 Gen 3 passive riser 1
CG2200-RISER1SX16L
1 Left side Single slot PCI-e X16 Gen3 passive riser
Choose one for Left
Side
CG2200-RISER2SX8L
None of the above risers are included in the Base System.
Left side Dual slot PCI-e x8 Gen 3 passive riser 1
www.kontron.com
I. Select RAID
The CG2300 Base System supports RAID 0/1/10 for 6 SAS hard drives or SATA SSD’s, done through the on-board SAS controller. If additional level of RAID is required, please refer to the options detailed in Table 7.
Table 7: CG2300 RAID Options
Supported
RAID
Included in CG2300 Base
System?
Additional item to order Comments
0/1/10
0/1 /5/ 10 /50
1/5/6/10/50/60
Yes
No
No
None
Intel AXXRPFKHY5
Intel RS3DC080*
LSI3008 chip offers hardware RAID. Storage backplane is directly connected to the RAID controller in Base system.
This key, used along with the on-board LSI3008 will permit to add RAID 5 or 50 to the built-in RAID functionality
Kontron recommends to use this external (PCIe)
RAID card when Battery Backup functionality is mandatory for your application. The card itself, without the Battery Backup offers similar functionality vs the on-board RAID solution, using the same LSI 3008 controller.
No supplementary cables are required to use the Intel RS3DC080. System built-in SAS cables simply need to get disconnected from the on-board SAS controller and connected to RAID card. As such, there is no RAID cable kit as it is for the CG2200.
*The Intel RS3DC080 RAID card comes optionally with a battery backup unit (Intel AXXRMFBU4), which requires the following bracket for proper mounting in the system. Note that the AXXRMFBU4 comes delivered with all needed cables, connecting RS3DC080 to AXXRMFBU4. As such, there is no RAID cable kit as it is for the CG2200.
Table 8: Battery Backup Bracket Option for Intel RS3DC080 Card
Product Code
K00740-001
Description
Products
Supported
Included in Base
System (Y/N)
Min.
Order Qty
Mounting bracket for Intel Battery Backup unit (AXXRMFBU4)
CG2300,
CG2200
N 1
15 www.kontron.com
J. Select Storage
SAS HDD / SATA SSD
The CG2300 Base System supports for up to 6 SAS hard drives or SATA SSD’s. SATA rotating hard drives are not recommended for use in this system.
Please refer to the Tested Hardware and Operating System List (THOL) for complete listing of HDD’s that have been validated for the CG2300. The THOL is a customer-driven document. If a specific HDD is required please contact Kontron’s customer support.
Flash Drives
Two front accessible SD memory slots are available. The CG2300 can be configured to boot from SD memory modules for software update or logging purposes. Generic SD-Flash devices may be sourced from a wide variety of vendors.
An internal optional eUSB Flash Drive is supported. Refer to THOL (Tested Hardware and O/S List) for ordering choices.
An internal optional M.2 Flash Drive is supported. Refer to THOL (Tested Hardware and O/S List) for ordering choices.
K. Select Memory
Refer to THOL (Tested Hardware and O/S List) for ordering choices.
DDR4 - RDIMM or LRDIMM only.
No UDIMM support.
16 www.kontron.com
L. Select Remote Management Module Option
CG2300
If you are familiar with CG2200 management’s solution, please note that CG2300’s management has some differences.
CG2300 has a Dedicated Management Port – 1GbE RJ-45, found in the back panel of the system.
The Dedicated Management Port (DMN) is active with or without the RMM4LITE key installed.
On the CG2300, as for the CG2200, Basic features such as IPMI 2.0, Diagnostic Beep Code and Power State Retention are available, even without the
AXXRMM4LITE Activation key. Details of Basic features are available in the Baseboard Technical Product Specification found on Kontron’s web site.
The RMM4LITE enables Advanced features, which are Integrated KVM and Remote Media Redirection.
The RMM4, which was an option on Kontron CG2200, is not compatible with the CG2300.
In comparison, CG2200’s Management solution:
The RMM4 and RMM4LITE enable advanced features, which are Integrated KVM and Remote Media redirection.
The RMM4 provides a Dedicated Management Port which is not part of the CG2200 Base System.
The RMM4LITE does not offer a Dedicated Management Port. It must use one of the system’s Onboard LAN Ports.
Only one of these two RMM options is to be used per CG2200 system.
Table 9: Remote Management Module Option
Product Code
AXXRMM4LITE
Description
Products
Supported
Included in Base
System (Y/N)
Min.
Order Qty
Intel® Remote Management Module 4
LITE Activation key
CG2300,
CG2200
N 1
17 www.kontron.com
18
M. Select System Mounting
There are many choices for mounting of the CG2300 within rack enclosures. Depending on the application, the following rack mount kits are available. Rack mounting kits for 2-post or 4-post, 19-inch or 23-inch racks are offered for this product. These include TMLCMOUNT21, TMLPMOUNT41, TMLPMOUNT51,
TMLPMOUNT52, and TMLPSLIDE01.
All Rack Mount kits in Table 10 below are EIA Universal - hole spacing.
All Rack Mount kits in Table 10 have the appropriate hardware for mounting in 20 to 24 inch rack depth.
If rack is deeper than 24 inches, then use Extender Kit along with TMLPMOUNT41 or TMLPMOUNT51- see in Table 10 below.
TMLPMOUNT51/52 series are designed with a slide-in rail-type system. Rails are designed to support a mounted server during fan service.
Please refer to Appendix A to determine the correct options to suit your needs.
The TMLPSLIDE01 is an accessory kit designed for use in conjunction with slide rails to produce a rack mounted serviceable server. The TMLPSLIDE01 kit contains two Universal Front Mounting Brackets that secure the server to the front of the rack. The sliding rails and optional mounting brackets required to mount the server must be purchased through the channel.
Table 10: Rack Mount Kits Options (refer to Appendix A for additional details)
Product Code
TMLCMOUNT21
Description
Slide Pull Out Locking
(Yes/No)
Minimum
Order Qty
Rack Mount Kit TMLCMOUNT21
Used for mounting servers on a 19-inch wide, 2-post rack
No Slide 10
TMLPMOUNT41
TMLPMOUNT51
TMLPMOUNT52
Rack Mount Kit TMLPMOUNT41
Used for mounting servers on 19-inch wide, 2-post or 4post racks
NOTES:
- 2-post screw access is from the side
- Not compatible with HP Mulan rack
Rack Mount Kit TMLPMOUNT51
Used for mounting servers on 19-inch wide, 2-post or 4post racks
NOTES:
- Xylan finish
Rack Mount Kit TMLPMOUNT52
Used for mounting servers on 23-inch wide, 2-post or 4post racks
NOTES:
- Xylan finish
- also ETSI hole spacing compliant
No
Yes
Yes
10
1
1
www.kontron.com
19
TMLPSLIDE01
Universal Front Mounting Brackets
The Accuride 22-inch Model 305A-LR slide rails would use TMLPSLIDE01.
Each kit contains two Universal Front Mounting Brackets that secure the server to the front of the rack.
N/A 1
1059-8187
Rails Extender Kit
Maximum rack depth when using:
- TMLPMOUNT41 –> 36 inches
- TMLPMOUNT51 –> 34 inches
N/A see Rail model
1
Notes:
Using slide rails could result in non-compliance with Seismic Zone 4 requirements of NEBS-3 certification.
Extra care must be exercised with TMLPMOUNT41 to securely hold the server with one's hands when sliding it out of the rack; otherwise, the server could fall to the ground as it is being removed.
Plastic strips on TMLPMOUNT41 have peeled off in some customer installations. The result of this is that the parts are usable, but the server could have somewhat of a "scrape-in feel" rather than "slide in". Also, the rails will fit sloppier, so the side-located chassis securing screws could be difficult to align in 2-post installations. Replacement material is available from the plastic strip manufacturer.
Xylan is a tough, low-friction coating similar to Teflon.
EIA-Wide spacing doesn't have the interstitial hole that is present in EIA-Universal. TMLPMOUNT51 contains an adapter bracket to overcome this EIA-Wide issue.
This component (2U Nut Bar) enables installation of a rail kit into a 1U rack slot when there is already equipment installed both above and below that open slot.
The sides of the server must be accessible when using TMLPMOUNT41 in 2-post racks.
The TMLPSLIDE01 kit contains server securing brackets.
www.kontron.com
3. Ordering CG2300 Serviceable Items
The table below lists all of the Serviceable Spares items that may be ordered for the CG2300 system. Generally these are items that could potentially fail or need replacement over the life of the product. These items are made available so that customers might stock their service depots and repair centers. Please read the following notes regarding this parts list.
3 rd
Party Accessories: For a listing of compatible 3 rd
party accessories, please refer to the Tested Hardware and Operating System List (THOL) document.
Table 11: Serviceable Items Options
Product Code
NSNSASHDDCARQ
Description
Products
Supported
Included in Base
Model (Y/N)
Min. Order
Qty
SAS HDD/SATA SSD Carrier
Contents: Carrier, black plastic filler, screws (4)
CG2300,
CG2200
Y
(six included)
1
CG2100-BEZEL01
Bezel
CG2300,
CG2200
Y
(one bezel)
1
1056-5174
Heatsink
Contents: passive heatsink, pre-installed thermal paste
CG2300
Y
(2 included)
1
S2600CW2SK
Intel Server Board S2600CW2SK*
* Available from Intel, not Kontron. CG2300 Y 1
20 www.kontron.com
CG2200-FANSET
1057-5299
1060-3344
Fan Assembly (6 fans)
Contents: 6 x 80m assembly fans. Includes plastic parts (finger guard).
CG2300,
CG2200
Y 1
SAS cable (SFF-8087 to SFF-8643)**
** Two (2) included in Base system, but as serviceable part, does not come in pair
CG2300 Y
(2 included)
1
Power Distribution Board – 850W CG2300 Y 1
1059-8642
1059-8695
DC PSU Mating Connector Kit
To build DC power cable. It is a good practice to order at least one spare kit to prevent running short of contact pins when building the DC cable.
CG2300 Y (one per DC PSU) 1
Chassis Top Cover Kit
Kit includes Top Cover and Safety Label
CG2300 Y 1
21 www.kontron.com
22
Appendix A. Rack Mounting Options
Rack Mounting Options for 1U and 2U Communications Rack Mount Servers.
Rack mounting kits for 2-post or 4-post, 19-inch or 23-inch racks are offered for this product.
They are all compatible with 3-inch and 5-inch deep posts.
Although these mounts have been designed for industry standard racks, please consult with your Field Application or Sales Engineer before selecting racks for these servers.
Compatible rack mounting kits can also be obtained from 3rd party suppliers.
All rack mount kits listed are suitable for 1U and 2U Communications Rack Mount Servers.
Installation instructions are included in each kit.
Below are examples for various Rail Mounting Kit, as well as Extender kit, intended for rack depth above 24 inches.
The TMLCMOUNT21 kit mounts Communication Rack Mount Servers to a 2-post, central office type, 19-inch wide rack. This kit consists of L-shaped brackets that fasten to the sides of the server and to the rack.
Figure 2: TMLCMOUNT21
www.kontron.com
Figure 3: Slide-in Rail-Type System
23
The diagrams above summarize the components and “slide-in rail-type” system. It can be adapted for a 2-post or 4-post installation.
TMLPMOUNT52, for 23-inch rack, has the same mounting topology.
www.kontron.com
Figure 4: TMLPMOUNT41 Extender Kit
24 www.kontron.com
Figure 5: TMLPMOUNT51 Extender Kit
25 www.kontron.com
Figure 6: Two-post mid-mount in 23-inch rack
26 www.kontron.com
27
Figure 7: TMLPMOUNT41/51 - 2-post
Figure 8: TMLPMOUNT52 - 4-post (23 inch rack shown)
www.kontron.com
CORPORATE OFFICES
Europe, Middle East & Africa
Lise-Meitner-Straße 3-5
86156 Augsburg
Germany
Tel.: + 49 (0) 821 4086-0
Fax: + 49 (0) 821 4086 111 [email protected]
North America
14118 Stowe Drive
Poway, CA 92064-7147
USA
Tel.: + 1 888 294 4558
Fax: + 1 858 677 0898 [email protected]
Asia Pacific
17 Building,Block #1, ABP.
188 Southern West 4th Ring Road
Beijing 100070, P.R.China
Tel.: + 86 10 63751188
Fax: + 86 10 83682438 [email protected]
www.kontron.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project