WGSW-24040HP

WGSW-24040HP4

24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports

The WGSW-24040HP series is the latest generation of PLANET Managed Gigabit PoE

Switches featuring PLANET intelligent PoE functions to improve the availability of critical business applications. The series provides IPv6/IPv4 management and built-in L2/L4

Gigabit Switching engine along with 24 10/100/1000BASE-T ports featuring 30-watt

802.3at Power over Ethernet plus (PoE+) and 4 Gigabit SFP slots. With total power budget up to 220W and 440W for different kinds of PoE applications, the series provides quick, safe and cost-effective Power over Ethernet network solutions to security IP surveillance for small businesses and enterprises.

Reset Button

Console Port

24 x Gigabit 802.3at PoE Ports

WGSW-24040HP offers 220W power budget

WGSW-24040HP4 offers 440W power budget

4 x Gigabit TP/SFP Combo Ports

Centralized Power Management for Gigabit Ethernet PoE Networking

To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the WGSW-24040HP series features IEEE 802.3at PoE+ that combines up to 30 watts of power output and data per port over one CAT 5E/6 Ethernet cable.

It is designed specifically to meet the demand of higher power consuming network PD

(powered devices) such as IR, PTZ, speed dome cameras or even box type IP cameras with built-in fan and heater. Compliant with both 802.3at and 802.3af, the WGSW-

24040HP series allows more flexibility in power requirement for a variety of PDs.

Model & PoE Budget Number of Powered Device

Applications

WGSW-24040HP

220 watts

WGSW-24040HP4

440 watts

Class 2 PD @ 7 watts

PoE Mini Dome PoE VoIP Phone

24 24

PoE Ability

(100 meters)

Class 3 PD @ 15 watts

PoE Box IP Camera PoE Wireless AP

14 24

Class 4 PD @ 30 watts

7 14

PoE+ Speed Dome

Physical Port

• 24-port 10/100/1000BASE-T RJ45 copper

• 4 100/1000BASE-X mini-GBIC/SFP slots , shared with port-21 to port-24

• RS232 DB9 console interface for basic management and setup

Power over Ethernet

• Complies with IEEE 802.3at High Power over Ethernet

End-span PSE

• Complies with IEEE 802.3af Power over Ethernet End-span

PSE

• Up to 24 ports of IEEE 802.3at/802.3af devices powered

• Supports PoE power up to 30.8 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100m

• PoE Management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE Port Power feeding priority

– Per PoE port power limit

– PD classification detection

– PD alive-check

– PoE schedule

– PD power recycling schedule

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and

IEEE 802.3x pause frame flow control (full-duplex)

• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

• Storm control support

– Broadcast/Multicast/Unicast/Unknown-unicast

• Supports VLAN

– IEEE 802.1Q tagged VLAN

– Up to 255 VLANs groups, out of 4095 VLAN IDs

– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

– Private VLAN Edge (PVE)

– Protocol-based VLAN

1

WGSW-24040HP/WGSW-24040HP4

Built-in Unique PoE Functions for Powered Devices Management

As a managed PoE Switch for surveillance, wireless access and VoIP network, the

WGSW-24040HP series features special PoE Management functions:

■ PD Alive Check

■ Scheduled Power Recycling

■ SMTP/SNMP Trap Event Alert

■ PoE Schedule

Intelligent Powered Device Alive-Check

The WGSW-24040HP series can be configured to monitor connected PD (Powered

Device) status in real-time via ping action. Once the PD stops working and responding, the WGSW-24040HP series will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the

PD’s power source and reducing administrator management burden.

STEP1

PoE PD Alive-checking

STEP2 STEP3

PT PoE Camera

Ping Request

No Response!

Ping Request check alive status 3 times

ON

PoE

OFF

PT PoE Camera

Restart PoE device without response

Scheduled Power Recycling

The WGSW-24040HP series allows each of the connected PoE IP cameras to reboot in a specific time each week. Therefore, it will reduce the chance of IP camera crash resulting from buffer overflow.

SMTP/SNMP Trap Event Alert

Though most NVR or camera management softwares offer SMTP email alert function, the WGSW-24040HP series further provides event alert function to help to diagnose the abnormal device owing to the network connection break, lost of PoE power or the rebooting response by PD Alice Check process.

PoE Schedule for Energy Saving

Under the trend of energy saving worldwide and contributing to environmental protection, the WGSW-24040HP series can effectively control the power supply besides its capability of giving high watts power. The “ PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save power and money.

8AM

PoE PoE PoE

5PM

PoE

5PM

PoE PoE PoE

8AM

PoE

Power

On

6 Watts

Power

On

6 Watts

Power

On

12 Watts

Power

On

12 Watts

Total consumption of 36 watts / hr

Power

Off

6 Watts

Power

Off

6 Watts

Power

Off

12 Watts

Power

On

12 Watts

Save 24 watts / hr during off-business hours

Total Saved = 10800 watts / month

PoE

1000Base-T UTP with PoE

– MAC-based VLAN

– IP Subnet-based VLAN

– Voice VLAN

– Management VLAN

• Supports Spanning Tree Protocol

– STP, IEEE 802.1D Spanning Tree Protocol

– RSTP, IEEE 802.1w Rapid Spanning Tree Protocol

– MSTP, IEEE 802.1s Multiple Spanning Tree Protocol (by

VLAN)

– STP BPDU Guard and BPDU filtering

• Supports Link Aggregation

– IEEE 802.3ad Link Aggregation Control Protocol (LACP)

– Cisco ether-channel (Static Trunk)

– Maximum 12 trunk groups, up to 8 ports per trunk group

– Up to 16Gbps bandwidth (full duplex mode)

• Provides port mirror (many-to-1)

• Port mirroring to monitor the incoming or outgoing traffic on a particular port

• Loop protection to avoid broadcast loop

Layer 3 IP Routing Features

• Supports maximum 32 software static routes and route summarization

Quality of Service

• Ingress Shaper and Egress Rate Limit per port bandwidth control

• 8 priority queues on all switch ports

• Traffic classification

– IEEE 802.1p CoS

– TOS/DSCP/IP Precedence of IPv4/IPv6 packets

– IP TCP/UDP port number

– Typical network application

• Strict priority and Weighted Round Robin (WRR) CoS policies

• Traffic-policing policies on the switch port

• DSCP remarking

Multicast

• Supports IGMP snooping v1, v2 and v3 for IPv4 multicasting network

2

WGSW-24040HP/WGSW-24040HP4

Cost-effective IPv6 Managed Gigabit Switch Solution for SMBs

Faced with the increasingly large number of IP cameras and wireless APs being installed and deployed in all kinds of applications, more and more network equipment start to support IPv6 protocol for next generation networking. To fulfill the IPv6 management demand, the WGSW-24040HP series works with the original IPv4 network structure, and also supports the new IPv6 network structure. With easy and friendly management interfaces and plenty of management functions included, the WGSW-

24040HP series is the best choice for SMBs, and IP surveillance and wireless service providers to connect with IPv6 network.

Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible

Management

To help customers stay on top of their businesses, the WGSW-24040HP series not only provides ultra high transmission performance and excellent layer 2 technologies, but also

IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

Efficient Management

For efficient management, the WGSW-24040HP managed switch series is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the WGSW-24040HP series offers an easy-to-use, platform independent management and configuration facility. The WGSW-24040HP series supports SNMP and it can be managed via any standard SNMP v1 and v2 management software. For the text-based management mode, the WGSW-24040HP can be accessed via Telnet and the console port. Moreover, the WGSW-24040HP series offers remote secure management by supporting SSH, SSL and SNMPv3 connection whose packet content can be encrypted at each session.

Robust Layer 2 Features

The WGSW-24040HP series can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid

Spanning Tree protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD snooping. The WGSW-24040HP series provides 802.1Q tagged VLAN and the VLAN groups allowed will be maximally up to 255. The WGSW-24040HP not only allows the operation of a high-speed trunk combining multiple ports, but also supports connection fail-over.

Powerful Security

The WGSW-24040HP series offers a comprehensive Layer 2 to Layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x

Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.

The WGSW-24040HP series also provides DHCP Snooping, IP Source Guard and

Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly secured corporate networks with considerably less time and effort than before.

• Supports MLD snooping v1 and v2 for IPv6 multicasting network

• Querier mode support

• IGMP snooping port filtering

• MLD snooping port filtering

• MVR (Multicast VLAN Registration)

Security

• Authentication

– IEEE 802.1x port-based/MAC-based network access authentication

– Built-in RADIUS client to co-operate with the RADIUS servers

– TACACS+ login users access authentication

– RADIUS/TACACS+ users access authentication

• Access Control List

– IPv4/IPv6 IP-based ACL

– MAC-based ACL

• Source MAC/IP address binding

• Port Security for Source MAC address entries filtering

• DHCP snooping to filter distrusted DHCP messages

• Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding

• IP source guard prevents IP spoofing attacks

• Auto DoS rule to defend DoS attack

• IP address access management to prevent unauthorized intruder

Management

• IPv4 and IPv6 dual stack management

• Switch Management Interfaces

– Console/Telnet command line Interface

– Web switch management

– SNMP v1, v2c, and v3 switch management

– SSH/SSL secure access

• User Privilege levels control

• System Maintenance

– Firmware upload/download via HTTP/TFTP

– Configuration upload/download through web interface

– Dual Images

– Reset button for system reboot or reset to factory default

– Built-in Trivial File Transfer Protocol (TFTP) client

• Four RMON groups (history, statistics, alarms, and events)

• IPv6 IP address/NTP/DNS management and ICMPv6

• BOOTP and DHCP for IP address assignment

3

WGSW-24040HP/WGSW-24040HP4

Flexible and Extendable Solution

The four mini-GBIC slots built in the WGSW-24040HP series support dual speed, and 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiberoptic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and above 10/20/30/40/50/70/120 km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

• DHCP Relay and DHCP Option 82

• NTP (Network Time Protocol)

• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-

MED

• Cable diagnostic technology provides the mechanism to detect and report potential cabling issues

• PLANET smart discovery utility for deploy management

Applications

Perfect Integration Solution for IP PoE Camera and NVR System

The WGSW-24040HP series brings an ideal secure surveillance system at a lower total cost. It provides 24 10/100/1000Mbps 802.3at PoE ports with 4

Gigabit TP/SFP Combo interfaces, offering sufficient PoE power for a maximum of 24 IEEE 802.3af PoE IP cameras at the same time.

With 4 Gigabit TP/SFP Combo interfaces, the WGSW-24040HP series supports connection to three 8-channel NVR systems to receive stream from 20 IP cameras and also to backbone switch from an uplink port, and then access to control center. With its high performance switch architecture, the recorded video files from the 20 IEEE 802.3af PoE IP cameras can be saved in the NVR systems, which can be controlled and monitored both in the local LAN and the remote site via Internet.

22 PoE IP Cameras

PoE PoE PoE PoE PoE PoE PoE PoE

WGSW-24040HP Series

1000

PoE

1000BASE-SX/LX Fiber-optic

1000BASE-T UTP

1000BASE-T UTP with PoE

NVR

1000

Uplink

Control and Monitoring Center

4

IWGSW-24040HP/WGSW-24040HP4

IP Office Department/Workgroup PoE Switch

As the business expands, the additional telephones required could be installed at less cost via the implementation of PoE IP telephony system than that of the traditional circuit wiring telephony system. The WGSW-24040HP series helps enterprises to efficiently create an integrated data, voice, and powered

VoIP network. PLANET IEEE 802.3af compliant IP phones can be installed without any power cable because it can be powered via the standard Ethernet cable from the connected WGSW-24040HP series. With the WGSW-24040HP series, IP telephony deployment becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP telephony communications infrastructure.

PoE

DC

1000

100BASE-TX UTP

100BASE-TX UTP w PoE

Power Line (DC)

Telephone wire

1000BASE-SX/LX Fiber-optic

PoE IP

Camera

PC Group

WGSW-24040HP

Series

1000

PoE

N

N

PoE

Laptop PoE Wireless AP

PoE VoIP

Phone

PoE

Phone

PoE

PoE VoIP ATA

PTZ Camera

DC

802.3at Splitter

PoE

WGSW-24040HP

Series

Core

Switch

1000

IP Office Backbone PoE Switch

Providing up to 24 PoE, in-line power interfaces, or up to 20 PoE, in-line power interfaces and 4 Gigabit TP/SFP combo interfaces, the WGSW-24040HP series can easily build an IP phone system, IP camera system, or wireless AP group for the enterprises in which power can be centrally controlled. For instance, IP cameras or wireless APs can be easily installed in the company for surveillance demands or building a wireless roaming environment in the office. Without the power socket limitation, the WGSW-24040HP series makes the deployment of IP cameras or wireless LAN AP easier and more efficient.

The 4 Gigabit TP/SFP combo interfaces in the WGSW-24040HP series also offers flexible Gigabit TP or fiber connection for uplink to public server groups.

PoE Wireless Access Point

11n AP with Gigabit LAN Port

PoE

PoE IP Camera

PoE

PoE

PoE

N N

N N

PoE

Laptop WiFi-Phone PDA

Port Security

Laptop

IP/MAC ACL

Internet

Router

WGSW-24040HP Series

Managed PoE Switch

PoE VoIP Phone

PoE PoE

Management Client

PoE

SSL / Telnet /Web

IP DSCP QoS

PoE usage status

SMB PoE IP office

Public/Server Groups

Gigabit

Switch

IP PBX Data Server

P

Printer Server

PoE

N

100BASE-TX UTP with PoE

1000BASE-T UTP

100BASE-TX UTP

2.4GHz 802.11n

5

IWGSW-24040HP/WGSW-24040HP4

Specifications

Product

Hardware Specifications

Copper Ports

10/100/1000Mbps/SFP Combo Interfaces

Console

Switch Architecture

Switch Fabric

Throughput

Address Table

Share Data Buffer

Flow Control

Jumbo Frame

Reset Button

LED

Power Requirements

Power Consumption (Full Load)

ESD Protection

Power over Ethernet

PoE Standard

PoE Power Supply Type

PoE Power Output

Power Pin Assignment

PoE Power Budget

PoE Ability

PD @ 7 watts

PD @ 15.4 watts

PD @ 30.8 watts

Layer 2 Functions

WGSW-24040HP WGSW-24040HP4

24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP (Mini-GBIC) supports 100/1000Mbps dual mode DDM, shared with Port-21 to Port-24

1 x RS232 DB9 serial port (115200, 8, N, 1)

Store-and-Forward

48Gbps/non-blocking

35.7Mpps@64Bytes

8K entries, automatic source address learning and ageing

4 megabits

IEEE 802.3x pause frame for full-duplex

Back pressure for half-duplex

9K bytes

< 5 sec: system reboot

> 5 sec: factory Default

System:

Power ( Green )

WGSW-24040HP Alert:

Fan 1 ( Green ), Fan 2 ( Green ), PWR ( Green )

WGSW-24040HP4 Alert:

Fan 1 ( Green ), Fan 2 ( Green ), Fan 3 ( Green ), PWR ( Green )

PoE Ethernet Interfaces (Port 1 to Port 24):

LNK/ACT (10/100/1000Mbps, Green), PoE-in-Use ( Orange )

100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):

1000 (LNK/ACT, Green ), 100 (LNK/ACT, Orange )

100~240V AC, 50/60Hz, 4A

262 watts

6KV DC

100~240V AC, 50/60Hz, 6A

482 watts

IEEE 802.3at/802.3af Power over Ethernet/PS0045

End-span

Per port 56V DC, 590mA. max. 30.8 watts

1/2(+), 3/6(-)

220 watts max.

24 units

14 units

7 units

440 watts max.

24 units

24 units

14 units

Port Configuration

Port Status

Port Mirroring

VLAN

Link Aggregation

Spanning Tree Protocol

Port disable/enable

Auto-negotiation 10/100/1000Mbps full and half duplex mode selection

Flow control disable/enable

Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status

TX/RX/Both

Many-to-1 monitor

802.1Q tagged based VLAN

Q-in-Q tunneling

Private VLAN Edge (PVE)

MAC-based VLAN

Protocol-based VLAN

Voice VLAN

IP Subnet-based VLAN

MVR (Multicast VLAN Registration)

Up to 255 VLAN groups, out of 4094 VLAN IDs

IEEE 802.3ad LACP/static trunk

12 groups of 8-port trunk supported

STP, IEEE 802.1D Spanning Tree Protocol

RSTP, IEEE 802.1w Rapid Spanning Tree Protocol

MSTP, IEEE 802.1s Multiple Spanning Tree Protocol

6

IWGSW-24040HP/WGSW-24040HP4

QoS

IGMP Snooping

MLD Snooping

Access Control List

Bandwidth Control

Layer 3 Functions

IP Interfaces

Routing Table

Routing Protocols

Management

Basic Management Interfaces

Secure Management Interfaces

SNMP MIBs

Standards Conformance

Regulation Compliance

Standards Compliance

Environment

Operating

Storage

Traffic classification based, strict priority and WRR

8-level priority for switching

- Port Number

- 802.1p priority

- 802.1Q VLAN tag

- DSCP/ToS field in IP packet

IGMP (v1/v2/v3) snooping, up to 255 multicast groups

IGMP querier mode support

MLD (v1/v2) snooping, up to 255 multicast groups

MLD querier mode support

IP-based ACL/MAC-based ACL

Up to 256 entries

Per port bandwidth control

Ingress: 100Kbps~1000Mbps

Egress: 100Kbps~1000Mbps

Max. 8 VLAN interfaces

Max. 32 routing entries

IPv4 software static routing

IPv6 software static routing

Console/Telnet/Web browser/SNMP v1, v2c

SSH, SSL, SNMP v3

RFC 1213 MIB-II

RFC 1493 Bridge MIB

RFC 1643 Ethernet MIB

RFC 2863 Interface MIB

RFC 2665 Ether-Like MIB

RFC 2819 RMON MIB (Group 1, 2, 3 and 9)

RFC 2737 Entity MIB

RFC 2618 RADIUS Client MIB

RFC 2863 IF-MIB

FCC Part 15 Class A, CE

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/100BASE-FX

IEEE 802.3z Gigabit SX/LX

IEEE 802.3ab Gigabit 1000T

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet PLUS

IEEE 802.3x flow control and back pressure

IEEE 802.3ad port trunk with LACP

IEEE 802.1D Spanning Tree protocol

IEEE 802.1w Rapid Spanning Tree protocol

IEEE 802.1s Multiple Spanning Tree protocol

IEEE 802.1p Class of Service

IEEE 802.1Q VLAN tagging

Temperature: 0 ~ 50 degrees C

Relative Humidity: 20 ~ 95% (non-condensing)

Temperature: -20 ~ 70 degrees C

Relative Humidity: 20 ~ 95% (non-condensing)

RFC 2933 IGMP-STD-MIB

RFC 3411 SNMP-Frameworks-MIB

RFC 4292 IP Forward MIB

RFC 4293 IP MIB

RFC 4836 MAU-MIB

IEEE 802.1X PAE

LLDP

PoE-Ethernet MIB

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

RFC 768 UDP

RFC 793 TFTP

RFC 791 IP

RFC 792 ICMP

RFC 2068 HTTP

RFC 1112 IGMP version 1

RFC 2236 IGMP version 2

RFC 3376 IGMP version 3

RFC 2710 MLD version 1

FRC 3810 MLD version 2

Ordering Information

WGSW-24040HP

WGSW-24040HP4

24-Port 10/100/1000Mbps 802.3at PoE + 4-slot Shared SFP Managed Switch (220 watts)

24-Port 10/100/1000Mbps 802.3at PoE + 4-slot Shared SFP Managed Switch (440 watts)

7

WGSW-24040HP/WGSW-24040HP4

Available Modules for WGSW-24040HP series

MGB-GT

MGB-SX

MGB-LX

MGB-L30

MGB-L50

MGB-L70

MGB-L120

MGB-LA10

MGB-LB10

MGB-LA20

MGB-LB20

MGB-LA40

MGB-LB40

MFB-FX

MFB-F20

MFB-F40

MFB-F60

MFB-FA20

MFB-FB20

SFP-Port 1000BASE-T Module

SFP-Port 1000BASE-SX mini-GBIC module

SFP-Port 1000BASE-LX mini-GBIC module

SFP-Port 1000BASE-LX mini-GBIC module -30km

SFP-Port 1000BASE-LX mini-GBIC module -50km

SFP-Port 1000BASE-LX mini-GBIC module -70km

SFP-Port 1000BASE-LX mini-GBIC module -120km

SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module -10km

SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module -10km

SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module -20km

SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module -20km

SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module -40km

SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module -40km

SFP-Port 100BASE-FX Transceiver (1310nm) -2km

SFP-Port 100BASE-FX Transceiver (1310nm) -20km

SFP-Port 100BASE-FX Transceiver (1310nm) -40km

SFP-Port 100BASE-FX Transceiver (1310nm) -60km

SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) -20km

SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) -20km

Related PoE Products

ICA-HM136

ICA-HM620

POE-152S

POE-162S

POE-E101

POE-E201

WNAP-6350

WNAP-7350

H.264 2 Mega-pixel 20M IR Vandalproof Dome IP Camera

2 Mega-pixel PoE Plus Speed Dome Internet Camera

IEEE 802.3af Power over Ethernet Splitter

IEEE 802.3at Gigabit High Power over Ethernet Splitter

IEEE 802.3af Power over Ethernet Extender

IEEE 802.3at Power over Ethernet Extender

2.4GHz 300Mbps 802.11b/g/n Wireless Outdoor Access Point

5GHz 300Mbps 802.11a/n Wireless Outdoor Access Point

PLANET Technology Corporation

11F., No.96, Minquan Rd., Xindian Dist., New Taipei City

231, Taiwan (R.O.C.)

Tel: 886-2-2219-9518

Email: [email protected]

Fax: 886-2-2219-9528 www.planet.com.tw

WGSW-24040HP/WGSW-24040HP4

PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved.

8