- Computers & electronics
- Data storage
- Data storage devices
- Memory cards
- Transcend
- TS4GSSD10-M
- Data Sheet
advertisement
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M
Description
The 1-inch Solid State Disk is small in size, has a huge capacity and low power consumption making it perfect for use as a mobile storage solution in devices such as, Mobile Phones, PDA and GPS systems. This guide is written to provide general installation and handling information, please use it in conjunction with the Owner’s Manual for your device or system.
Placement
1.0” Solid State Disk
Features
•
RoHS compliant
• Fully compatible with 1.0-inch hard drive form factor and interface (35-Pin FPC ZIF connector)
• Non-volatile Flash Memory for outstanding data retention
• Built-in ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer
• Supports up to PIO Mode 4 and Ultra DMA Mode 4
• Supports ATA Security Commands
• Support S.M.A.R.T function (self-definition)
• Lower Power Consumption
• Shock resistance
• Power Supply: 3.3V ± 5%
Dimensions
Side
A
B
C
Millimeters
40.00
± 0.30
30.00
± 0.20
3.80
± 0.50
Inches
1.575
± 0.012
1.181
± 0.008
0.149
± 0.020
Transcend Information Inc.
1
V1.2
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M
Specifications
Physical Specification
Form Factor
Storage Capacities
Dimensions (mm)
Weight
Connector
Length
Width
Height
1.0” Solid State Disk
1-inch HDD
2 GB to 16 GB
30.0 0
± 0.20
40.00
± 0.30
3.80
± 0.50
6 g
0.3 mm pitch 35-Pin Zero Insertion Force (ZIF) connector (P-ATA)
Environmental Specifications
Operating Temperature
Storage Temperature
0 ℃ to 70 ℃
- 40 ℃ to 85 ℃
Humidity
Operating Humidity (Non condensation)
Storage Humidity (Non condensation)
5% to 95%
5% to 95%
* Note: Reference to the IEC 60068-2-1 and IEC 60068-2-56 Testing procedures; 48-hours chamber test on ASUS
M2N-MX, 1GB RAM, Windows
®
XP Version 2002 SP2.
Power Requirements
Input Voltage DC 3.3V
± 5%
Power Consumption
(DC 3.3V @ 25 ℃ )
Write
Read
Standby
* Note: Base on TS16GSSD10-M
84.5 93.4
55.1 68.4
0.4 1.3
Transcend Information Inc.
2
V1.2
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M
Reliability
Data Reliability
Data Retention
Connector Durability
MTBF
Built-in 4 symbol/page correction ECC
10 years
10,000 times
4,400,000 hours
1.0” Solid State Disk
Interface Specification
Drivers
ATA Compatibility
No Device Driver Required
ATA/ATAPI 4
PIO Modes 0 - 4
UDMA Modes 0 - 4
Performance
Model P/N Capacity Read Write Random Read Random Write
13402 2546
* Note : 25 ℃, according to 44 pin to 40 pin IDE transferring cable test on ASUS M2N-MX, 1GB RAM, IDE interface support
UDMA4, Windows
®
XP Version 2002 SP2, benchmark utility HDBENCH (version 3.4006), copied file 100MB
Actual Capacity
Model P/N Capacity Cylinder
TS2GSSD10-M 2GB 3884
TS4GSSD10-M 4GB 7769
TS8GSSD10-M 8GB 15538
TS16GSSD10-M 16GB 33149
* Note: FAT32 format
Head
16
16
16
15
Sector
63
63
63
63
Regulations
Compliance CE, FCC and BSMI
Transcend Information Inc.
3
V1.2
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M
Package Dimensions
Below figure illustrates the Transcend 1” Solid State Disk. All dimensions are in mm.
1.0” Solid State Disk
Transcend Information Inc.
4
V1.2
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M 1.0” Solid State Disk
Pin Assignments
Pin No. Pin Name Pin No. Pin Name
01 GND 02 DD10
03 DD9 04 DD2
05 DD8 06 DD1
07 -PDIAG 08 DD0
09 -DASP 10 DA0
11 -DMACK DA1
13 DMARQ 14 DA2
15 IORDY 16 -RESET
17 -CSEL 18 VCC
21 -DIOW 22 -DIOR
23 -CS1 24 -CS0
25 DD15 26 DD7
27 DD14 28 DD6
29 DD13 30 DD5
31 DD12 32 DD4
33 DD11 34 DD3
35 GND
Pin Layout
Pin out
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Transcend Information Inc.
5
V1.2
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M
Block Diagram
1.0” Solid State Disk
Data bus
Control
Signal
Power
Solid
State Disk
Controller
D00 ~ D07
-CE0, -CE2…
Others
D10 ~ D17
-CE1, -CE3…
Flash Memory
D0 – D7
-CE0
-CE1
-WE…-RE
Flash Memory
D0 – D7
-CE0
-CE1
-WE…-RE
DC Characteristics
Parameter Symbol
Supply Voltage
High level output voltage
Low level output voltage
V
V
CC
OH
V
OL
V
IH
2.97 3.63 V
V
CC
– 0.8 V
High level input voltage
V
IL
Low level input voltage
Pull up resistance
2
Pull down resistance
R
PU
R
PD
Transcend Information Inc.
6
V1.2
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M
Command Set
1.0” Solid State Disk
Transcend Information Inc.
7
V1.2
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M 1.0” Solid State Disk
Transcend Information Inc.
8
V1.2
T S 2 G S S D 1 0 M / / / T S 4 G S S D 1 0 M
T S 8 G S S D 1 0 M / / / T S 1 6 G S S D 1 0 M
Ordering Information
TS XG SSD XX
1.0” Solid State Disk
Transcend
Product
Form Factor:
10-S = 1" (SLC)
10-M = 1" (MLC)
Capacity
4GB~16GB
Solid State Disk
The above technical information is based on industry standard data and has been tested to be reliable. However,
Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice.
TAIWAN
No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C
TEL +886-2-2792-8000
Fax +886-2-2793-2222
E-mail: [email protected] www.transcend.com.tw
USA
Los Angeles:
E-mail: [email protected]
Maryland:
E-mail: [email protected] www.transcendusa.com
CHINA
E-mail: [email protected] www.transcendchina.com
GERMANY
E-mail: [email protected] www.transcend.de
HONG KONG
E-mail: [email protected] www.transcendchina.com
JAPAN
E-mail: [email protected] www.transcend.jp
THE NETHERLANDS
E-mail: [email protected] www.transcend.nl
United Kingdom
E-mail: [email protected] www.transcend-uk.com
Transcend Information Inc.
9
V1.2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement