Orange Amplifier Manual - Bax-shop

Orange Amplifier Manual - Bax-shop
CR120H
ENGLISH
4
CR120H
THANK YOU!
Thank you for choosing Orange. You are now a member of the ‘Legendary
British Guitar Amplifier’ owners club!
Our commitment to craftsmanship and quality control has allowed our
amplifiers to stand the test of time, giving their owners as much pleasure
now, as the day they were bought. To maintain this level of excellence, each Orange amplifier is put
through many rigorous test procedures before leaving the factory.
ENGLISH
Since 1968 when the company was founded, Orange has been a pioneering
force in the guitar amplification industry. Today, with a team of the world’s
finest amplifier engineers, Orange continues to push back the boundaries of
conventional tube amplifier design.
The warmth, tonal quality and rich harmonics generated by a valve amplifier cannot be reproduced
by ‘artificial’ means. Many guitarists have reached the same conclusion: neither the transistor nor
microchip is a suitable alternative to valve technology.
This booklet contains valuable technical and safety information Please take the time to read this
manual as the information may enhance the sound and performance of your amplifier. We are
confident that you will be delighted with your new purchase and that it will provide you with many
years of enjoyment.
4
CR120H
CONTENTS
CONTACT DETAILS.................................................................................................................................4
IMPORTANT SAFETY INFORMATION......................................................................................................5
USING YOUR AMPLIFIER........................................................................................................................8
ENGLISH
CONTENTS.............................................................................................................................................3
Front Panel Features............................................................................................................................10
Rear Panel Features ............................................................................................................................12
FREE EXTENDED WARRANTY OFFER....................................................................................................13
4
CR120H
CONTACT DETAILS
ENGLISH
Orange Amplification
OMEC House
108 Ripon Way
Borehamwood
Hertfordshire
WD6 2JA
ENGLAND
Tel: +44 20 8905 2828
Fax: +44 20 8905 2868
[email protected]
Orange USA
2065 Peachtree Industrial Ct.
Suite 208
Atlanta, GA 30341
USA
Tel: 1-404-303-8196
Fax: 1-404-303-7176
[email protected]
4
CR120H
IMPORTANT SAFETY INFORMATION
“Speaker Outputs” must be connected to a speaker cabinet of the designated
load rating using an un-shielded two conductor cable for speaker use at all times
during operation
ENGLISH
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated ‘dangerous voltage’
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons. Terminals labelled as
The exclamation point within an equilateral triangle and "WARNING" are
intended to alert the user to the presence of important operating instructions.
Failure to heed the instructions will result in severe injury or death.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near liquid.
4
CR120H
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades, one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
ENGLISH
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
• Servicing: Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
• Refer all servicing to qualified service personnel.
• Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions: (a) When the power-supply cord or plug
is damaged; (b) If liquid has been spilled, or objects have fallen into the product; (c) If the product
has been exposed to rain or water; (d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that are covered by the operating instructions.
Improper adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation; (e) if the product has been
dropped or damaged in any way; (f) when the product exhibits a distinct change in performance this indicates a need for service.
• Replacement Parts: When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
4
CR120H
ENGLISH
This Orange Amplifier conforms to UL Standard 60065 for Audio, Video and Similar Electronic
Apparatus - Safety Requirements;
Certified to CAN/CSA-C22.2 No. 60065-03; IEC 60065 2001 + A1:2005
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
4
CR120H
USING YOUR AMPLIFIER
For countries or regions with a mains voltage of 115v or 120v, please switch the small, red
mains selector to 115v or 120v and replace the fuse in the black pull out fuse tray, below the
mains inlet, with the 120v version supplied.
ENGLISH
IMPORTANT!
For countries or regions with a mains voltage of 230v, please switch the small, red mains
selector to 230v and replace the fuse in the black pull out fuse tray, below the mains inlet,
with the 230v version supplied.
Mains Fuse:
T3.15 Amp for 100v. (Japan Only)
T3.15 Amp for 120v.
T1.6 Amp for 230v.
4
CR120H
Make sure the correct speaker load is connected:
Do not connect a speaker load which is less than 8 Ohms.
ENGLISH
4
CR120H
FRONT PANEL FEATURES
2.
Volume Control (Clean Channel)
This controls the volume of the clean channel.
ENGLISH
1.
Input Jack Socket
Plug your instrument into this jack socket.
3.
Bass Control (Clean Channel)
This controls the bass response of the clean channel.
4.
Treble Control (Clean Channel)
This controls the treble response of the clean channel.
5.
Gain Control (Dirty Channel)
This controls the volume to the dirty channel.
6.
Bass Control (Dirty Channel)
This controls the bass response of the dirty channel.
7.
Middle Control (Dirty Channel)
This controls the midrange response of the dirty channel.
4
CR120H
8.
Treble Control (Dirty Channel)
This controls the treble response of the dirty channel.
10.
Reverb Selector Switch (Top: Spring - Middle: Hall - Bottom: Plate)
This control switches which reverb effect is used.
ENGLISH
9.
Volume Control (Dirty Channel)
This controls the output volume of the dirty channel.
11.
Master Reverb Control
This controls the level of the reverb.
12.
Master Volume Control
This controls the overall output volume.
13.
This
Chanel Switch
toggle switch switches between the clean and dirty channel
14.
Power toggle switch.
This turns on the mains power to the amplifier.
4
CR120H
REAR PANEL FEATURES
Speaker Jack Sockets (16 Ohm, 16 Ohm)
Please refer to “Using Your Amplifier”
16.
Channel Footswitch jack socket
Use any latching footswitch to change channel using this socket.
ENGLISH
15.
17.
Reverb footswitch jack socket
Use any latching footswitch to switch the reverb on and off.
18.
Valve Effects Loop (Send and Return)
Use the “Send” jack socket to go to the input of time based effects pedals or rack equipment
such as delay, chorus, etc. Use the “Return” jack socket to return from the output of the effects
being used.
(Note – Effects such as overdrive, fuzz, wah wah, tuner, etc, are probably best placed between
the instrument and the input of the amplifier)
4
CR120H
FREE EXTENDED WARRANTY OFFER
Speakers supplied with an Orange amp or purchased separately at our online store are covered for
90 days from the date of purchase.
The warranty status of any Orange product is subject to its being used for its intended purpose in
suitable conditions. As the manufacturer we reserve the right to refuse to warranty any Orange
product which has been misused in any way whatsoever.
ENGLISH
Orange amplifiers are under warranty for one year subject to consumer protection laws in the
country of purchase and distributor’s terms and conditions, an additional year can be added by
registering.
REGISTER RIGHT NOW AT www.orangeamps.com
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement