ALSO AVAILABLE VIDEO VIEWER MOUNTING KIT ANGLE BRACKET HANDLEBAR BRACKET ADHESIVE MOUNT Use the ANGLE BRACKET with the HELMET/HEAD MOUNTING STRAP. Use the VIDEO VIEWER to: • See what you’re RECORDING • PLAY BACK your videos or images • DELETE your videos or images • CHECK the battery level • CHECK the memory available CARRY CASE ADHESIVE TAPE Use the ANGLE BRACKET and ADHESIVE MOUNT to attach the ACTION SHOT™ CAMERA to your SKATEBOARD or SNOW BOARD. Angle Bracket Skateboard VIDEO VIEWER ATTACHMENT HIGH-IMPACT CASE Cushioned edges resist impact damage, including drops of up to 30 feet. Cushioned Edges Adhesive Mount Water-Proof Case Angle Bracket Combine the ANGLE BRACKET, ADHESIVE MOUNT and the WATER-PROOF CASE to attach to your SNOW BOARD. Helmet/Head Strap Use the HANDLEBAR BRACKET to attach ACTION SHOT™ CAMERA to your BICYCLE HANDLEBARS. HIGH-IMPACT CASE Use the HANDLEBAR BRACKET with the ANGLE BRACKET to attach ACTION SHOT™ CAMERA to your BICYCLE FORK. WATER-PROOF CASE Provide maximum protection for your Action Shot™ Camera from water, snow and dust. The Water-Proof Case is also impact resistant for drops of up to 30 feet. Front View Handlebar Bracket WATER-PROOF Water-Proof to depths of up to 10 feet. Front View Handlebar Bracket WATER-PROOF CASE Angle Bracket DUST-PROOF Keeps dust and dirt out. IMPACT-PROOF Resists impact damage, including drops of up to 30 feet. LITHIUM-ION POLYMER (LIPO) BATTERY SAFETY INFORMATION WARNING: This LiPo battery is permanently installed in your Action Shot™ Camera. Any attempt to remove the LiPo battery will result in permanent damage to the battery and product. WARNING: LiPo battery is potentially volatile. The user assumes all risks associated with use and charging of LiPo batteries. If you do not agree with these conditions, return the product prior to use. Technical Specifications: Type: Lithium-Ion Polymer (LiPo or Li-Poly) Capacity: 400 mAh Voltage: 3.7V Warnings and Cautions: WARNING: ALWAYS handle LiPo battery with extreme care. ALWAYS charge LiPo battery with included USB cable only. NEVER immerse LiPo battery in water or other liquids. NEVER remove LiPo battery from product. NEVER handle or recharge LiPo battery until it has cooled to surrounding NEVER disassemble, modify or solder LiPo battery. temperature. NEVER puncture or cut battery NEVER charge LiPo battery on or near combustible materials including paper, NEVER leave LiPo battery unattended at any time while being charged. plastic, wood, carpet, vinyl, leather, wood, or automobiles. NEVER handle LiPo battery while wearing metallic objects such as a ring, NEVER overcharge LiPo battery. watch or bracelet. NEVER connect product to an electrical outlet. NEVER allow LiPo battery internal electrolyte contents to get in eyes or NEVER use or recharge product if it appears damaged, cracked, becomes skin. discolored or deformed, gives oﬀ an odor, or otherwise appears abnormal. NEVER strike or throw product against a hard surface. Storage and Transportation: ALWAYS store product in a secure, dry, ventilated location. NEVER leave product near heat source such as a fire, oven or other high-temperature location. NEVER expose product to direct sunlight for extended periods. Recommended Temperature Ranges for Battery: Storage: 14 °F / -10 °C and 95 °F / 35 °C Charging: 32 °F / 0 °C to 113 °F / 45 °C Usage: Recommended temperature range during use: 14 °F / -10 °C to 140 °F / 60 °C Transporting in a vehicle: 14 °F / -10 °C and 113 °F / 45 °C Charging and/or operating of product outside of its specified range can reduce battery performance and cause the battery to leak, overheat, or explode. Dispose of or recycle product according to local, state, and federal regulations. JAKKS Pacific, Inc. is not responsible in any way for any bodily injury(s) and/or property damage that may occur from any contrary use in any way of this product. IMPORTANT SAFETY INFORMATION BATTERY WARNINGS AND PROPER USE WARNING: Battery acid leakage can cause personal injury and cause damage to the product and surrounding property. If battery leakage occurs, thoroughly wash any aﬀected skin, making sure to keep battery acid away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that comes into contact with leaked battery acid. Leaking batteries may make “popping” sounds. Dispose according to Local, State and Federal Laws. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures: < Reorient or relocate the receiving antenna. < Increase the separation between the equipment and receiver. < Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. < Consult the dealer or an experienced radio / TV technician for help. INSTRUCTIONS JAKKS Pacific® Battery, Solar or Electrically-Operated Product 90 DAY LIMITED WARRANTY Thanks for purchasing a great JAKKS Pacific® product! Please immediately register your product online at www.jakks.com/warranty. Registration is not required for the effectiveness of this limited warranty. IMPORTANT NOTICE TO CONSUMER: This 90 DAY LIMITED WARRANTY applies to the original product purchaser, provided the product: 1) was purchased from an authorized JAKKS™ distributor/dealer/retailer, and 2) is returned at your expense, postage pre-paid and insured, along with the original dated sales receipt to the address noted below. Please save a copy of your original sales receipt, as the original receipt will not be returned to you. If you return the product to us without the original dated sales receipt, this warranty coverage will not apply. If the product is determined by JAKKS to be defective and returned to JAKKS within the 90 day warranty period, we will (at our option) repair or replace it. Return shipment to you may take up to 6 weeks, depending upon your location. If your product is repaired or replaced, it will be warranted for the longer of the original warranty or for 30 days after warranty service. SCOPE OF LIMITED WARRANTY: The product is warranted to be: a) tested and inspected before shipment, and b) free of defects in material and workmanship for 90 days from date of purchase. If a covered defect occurs within the warranty period, then at our sole option, we will repair or replace the product or provide you with another product of equal value. WHAT IS NOT COVERED BY LIMITED WARRANTY: THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN MODIFIED OR REPAIRED BY USER OR OTHERS OR IF IT HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, IMMERSION IN WATER, NEGLECT, ABUSE, MISUSE, BATTERY LEAKAGE, IMPROPER BATTERY INSTALLATION, UNAUTHORIZED SERVICE, LOSS OF PARTS, WEATHER, ACTS OF GOD, ANY ACTION OR OMISSION WHICH CONSTITUTES A DEVIATION FROM THE OPERATING INSTRUCTIONS, OR ANY OTHER CAUSES NOT ARISING OUT OF DEFECTS IN WORKMANSHIP OR MATERIALS. EXCLUSIONS FROM LIMITED WARRANTY: THIS WARRANTY IS EXCLUSIVE OF AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES RELATED TO THIS PRODUCT, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES ARISING FROM POSSESSION, USE, OR MALFUNCTION OF THIS PRODUCT ARE EXCLUDED BOTH FOR PROPERTY DAMAGE AND PERSONAL INJURY TO THE EXTENT LEGALLY PERMITTED. ADDITIONAL LEGAL RIGHTS: This warranty provides specific legal rights. You may have other or different rights in your state or country. QUESTIONS OR COMMENTS: If you experience product difficulties or have questions or comments, you may contact our Consumer Relations department as follows: Phone: 877-875-2557 (toll-free, North America only) or 909-594-7771 x560 (Monday- Friday, 7:30AM-4:30PM Pacific/GMT -8). Mail: JAKKS Consumer Relations, 21749 Baker Parkway, Walnut, California USA 91789. Email: [email protected] TM & © 2012 JAKKS Pacific, Inc., 22619 Pacific Coast HwyMalibu, CA 90265 USA. JAKKS Pacific UK Ltd, Ascot, 5 Queens Square Ascot Business Park Lyndhurst Road U.K. MADE IN CHINA. Contents may vary in style, color, shape and decoration from images shown on package or in advertising. Questions or comments? www.jakks.com, [email protected], 1-877-875-2557 in North America, or 01344 638909 in the United Kingdom. CONTENTS ACTION SHOT™ CAMERA MOUNTING CASE ADHESIVE MOUNT HELMET MOUNTING STRAP Always wear protective gear while riding. USB CONNECTOR CONTROLS MODES Mode; Battery Level Record (Rec) / Stop Button LED Indicator Video Viewer Connection Port The Action Shot™ Camera operates in 3 MODES: • VGA MODE 30fps (640 x 480). • QVGA MODE 60fps (320 x 240) • PHOTOGRAPHY MODE (640 x 480) Speaker When the Action Shot™ Camera is turned ON by pressing the POWER / MODE SELECTION BUTTON (the first time), it begins in VGA MODE, which is 30fps (640 x 480). The resulting video is in NORMAL RESOLUTION and plays back at NORMAL SPEED. USB Port Power / Mode Selection Button Microphone Micro SD Card Slot If you PRESS the POWER / MODE SELECTION BUTTON a second time, then the LED INDICATOR lights up SOLID ORANGE. The camera responds with a sound and enters QVGA MODE (60fps; 320 x 240). The video will appear in SLOW MOTION when played back. Reset Button Hole If you PRESS the POWER / MODE SELECTION BUTTON a third time, then the LED INDICATOR lights up SOLID GREEN. The camera responds with a sound and enters PHOTOGRAPHY MODE. CHARGING THE BATTERY 1 Insert one end of the USB CONNECTOR into the Action Shot™ Camera’s USB PORT. Insert the other end into your computer’s USB PORT. The Action Shot™ Camera responds with a sound and the battery begins charging. OPERATION VGA MODE RED LED INDICATOR ON: PRESS the REC / STOP BUTTON to START recording. The camera responds with a sound as it begins to record video images. The camera is able to record approximately 2.5 minutes of VGA video using the internal memory. PRESS the REC / STOP BUTTON again to STOP recording. The camera responds with a sound and stops recording. To view your video, see the IMAGE TRANSFER section below. TO YOUR COMPUTER QVGA MODE 2 BATTERY CHARGE LEVEL: LED INDICATOR blinks RED: Battery Low/Empty LED INDICATOR blinks ORANGE: Battery Half Full LED INDICATOR is SOLID GREEN: Battery Fully Charged 3 Remove the USB CONNECTOR from the Action Shot™ Camera’s USB PORT. Remove the other end from your computer’s USB PORT. A fully charged battery will function for approximately 2 to 4 hours, depending on use. POWER ON/OFF PRESS & HOLD the POWER / MODE SELECTION BUTTON for 2 SECONDS to turn the camera ON. 3 PHOTOGRAPHY MODES SINGLE IMAGE GREEN LED INDICATOR ON: PRESS the REC / STOP BUTTON to take a single photo. The camera makes a sound and records a single image. Each time the REC / STOP BUTTON is pressed, another photo is taken. The camera's internal memory will store approximately 2,000 still images. Fully charging the Action Shot™ Camera takes approximately 2 hours. 1 ORANGE LED INDICATOR ON: PRESS the REC / STOP BUTTON to START recording. The camera responds with a sound as it begins to record video images. The camera is able to record approximately 2.5 minutes of QVGA video using the internal memory. PRESS the REC / STOP BUTTON again to STOP recording. The camera responds with a sound and stops recording. 2 The LED INDICATOR lights up SOLID RED. The Action Shot™ Camera responds with a sound. PRESS & HOLD the POWER / MODE SELECTION BUTTON for 5 SECONDS to turn the camera OFF. TIME LAPSE IMAGES GREEN LED INDICATOR ON: PRESS and HOLD the REC / STOP BUTTON for 2 seconds. The camera makes a sound and records a single image approximately every 2 seconds (the result will be time-lapse images). PRESS the REC / STOP BUTTON again to end recording; The camera makes a sound. The camera's internal memory will store approximately 2,000 images. Action Shot™ Camera has been optimized for OUTDOOR & DAYLIGHT use. For best results INDOORS, use in well lit areas. IMAGE TRANSFER To transfer your videos and still photos to your computer: 1. Attach the Action Shot™ Camera to your computer via USB CABLE (see Steps 1 & 2 in the CHARGING THE BATTERY section). 2. The camera responds with a sound. 3. Download the videos or images to your computer. 4. Remove the USB CABLE when your are finished (see Steps 5 & 6 in the CHARGING THE BATTERY section). Visit www.actionshotcamera.com for the latest information and FREE editing software. MEMORY HELMET/HEAD MOUNTING The INTERNAL MEMORY of the Action Shot™ Camera is 128mb. It will store approximately 2.5 minutes of video or 2,000 still images. When the INTERNAL MEMORY is full, the LED INDICATOR blinks rapidly for 3 seconds and the camera makes a sound. Stop recording and transfer your video or images to your computer (see above). 6 Upgrade the Action Shot™ Camera’s memory by purchasing a MICRO SD MEMORY CARD (not included). A 4GB Micro SD Memory Card will store approximately 81 minutes of video or 60,000 still images. When the MICRO SD MEMORY CARD is in the camera, it disables the camera’s internal memory, and all new images are recorded onto it. 1 SLIDE the MICRO SD CARD SLOT COVER UP. 2 Micro SD Card Slot Cover (Continued) 7 TIGHTEN the HELMET/HEAD MOUNTING STRAP and PRESS the STRAP against the LOOPED FASTENER to secure. INSTALL the HELMET/HEAD MOUNTING STRAP onto your SAFETY HELMET or your HEAD. INSERT the MICRO SD MEMORY CARD into the MICRO SD CARD SLOT. BOARD MOUNTING 3 Press and Hold the REC / STOP BUTTON and the POWER / MODE BUTTON for 5 SECONDS to format the MICRO SD MEMORY CARD. 4 4 CLOSE the MICRO SD CARD SLOT. To remove the MICRO SD MEMORY CARD, PRESS IN and RELEASE. Then, PULL the memory card out. Micro SD Card Slot Cover Follow STEPS 1 – 3 in the HELMET MOUNTING section. 4.1 REMOVE the PROTECTIVE COVERING (4.1) and PRESS the MOUNT onto a CLEAN SMOOTH SURFACE (4.2). HELMET/HEAD MOUNTING 1 ROTATE the front section of the MOUNTING CASE COUNTERCLOCKWISE (approx. 1/4”) and REMOVE. 3 ROTATE the front section of the MOUNTING CASE CLOCKWISE (approx. 1/4”). 5 For LANDSCAPE FORMAT ROTATE the MOUNTING CASE COUNTERCLOCKWISE. 4.2 2 INSERT the ACTION SHOT™ CAMERA into the rear section of the MOUNTING CASE and REPLACE the front section of the MOUNTING CASE. OR, use #2 or #3 SCREWS (not included) to secure the ADHESIVE MOUNT to a surface. 5 INSERT the MOUNTING CASE onto the ADHESIVE MOUNT. 6 ROTATE the MOUNTING CASE CLOCKWISE for PORTRAIT FORMAT, or COUNTERCLOCKWISE for LANDSCAPE FORMAT. 4 INSERT the MOUNTING CASE onto the HELMET/HEAD MOUNTING STRAP. TROUBLESHOOTING The Camera will not turn ON – Make sure the Camera is fully charged (See CHARGING THE BATTERY section). OR, for PORTRAIT FORMAT ROTATE the MOUNTING CASE CLOCKWISE. The Camera will still not turn ON – Insert a PAPER CLIP into the RESET HOLE and PRESS the RESET BUTTON. The Camera will not turn OFF – Insert a PAPER CLIP into the RESET HOLE and PRESS the RESET BUTTON. The Camera is turned ON, but... • The Camera will not Record – Insert a PAPER CLIP into the RESET HOLE and PRESS the RESET BUTTON. • The Camera will not Take Photos – Insert a PAPER CLIP into the RESET HOLE and PRESS the RESET BUTTON.