- Computers & electronics
- Computer components
- System components
- Interface cards/adapters
- EXSYS
- EX-1332
- Data Sheet
advertisement
Anwendung/Application :
Kassensysteme
P.O.S. System
Kartenleser
Card reader
USB
Computer System
Notebook
Barcode Reader
LED Display
Operating System (OS):
Waagen/
Balance
Geprüft/Approved:
EX-1332
Verpackung/Packing:
Beschreibung :
Merkmale :
Chip-Set :
Datentransfer-Rate :
Anschlüsse :
Arbeitstemperatur :
Luftfeuchtigkeit :
Hardwaresysteme :
Abmessung / Gewicht :
Lieferumfang :
USB zu 2S Seriell RS-232 Port (Prolific Chip-Set)
Das EX-1332 USB 1.1 zu Seriell RS-232 Gehäuse stellt zwei Serielle RS-232 High Performance UART 16C550 Ausgänge zur Verfügung. Es ist entwickelt worden um zwei weitere Serielle RS-232 Ausgänge in einem kompakten Gehäuse für PC, kleine Workstation oder Server über den USB 1.1 oder 2.0 Bus zu erweitern. Durch die einfache Installation, muss der Rechner nicht geöffnet werden und der Artikel EX-1332 kann bei laufendem Betrieb installiert werden.
Schnittstelle: RS-232 V.24
FIFO Buffer: 16C550 mit 16Byte
I/O Adressen: wird vom Betriebs System vergeben
Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing
Daten Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signale: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Stromversorgung: vom USB Bus (Bus Power)
Prolific PL2303HX
50 Baud bis 115.2KBaud
1 x B-Buchse Upstream
2 x 9 Pin D-SUB Seriell Stecker
0 bis 55
0
C
5 bis 95%
USB 1.1 oder 2.0
150 x 70 x 30 mm / 360g
EX-1332, 1 x USB Kabel A-Stecker auf B-Stecker (1.8 Meter), Treiber CD, Handbuch
Description:
Feature :
Chip-Set :
Data transfer rate :
Connectors :
Operating Temperature :
Operating Humidity :
Hardware system :
Size / Weight :
Packaging contents :
USB to 2S Serial RS-232 port (Prolific Chip-Set)
The USB 1.1 to Serial RS-232 box provides two high performance 16C550-type UART compatible RS-232 serial ports. It is designed for
PC, thin client or server to provide instant COM port expansion in a compact box through the USB 1.1 or 2.0 Bus. With the easy installation you don t need to open the computer system and install the EX-1332 when the system run.
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Power from the USB Bus (Bus Power)
Prolific PL2303HX
50 Baud up to 115.2KBaud
1 x B-female connector
2 x 9 pin D-SUB serial male connector
0 up to 55
0
C
5 up to 95%
USB 1.1 or 2.0
150 x 70 x 30 mm / 360g
EX-1332, 1 x USB cable A-male to B-male connector (1.8 meter), Driver CD, Manual
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement