- Computers & electronics
- Computer components
- Chassis components
- Network equipment chassis
- User manual
advertisement
▼
Scroll to page 2
iConverter ® iConverter 5-Module Chassis Managed Redundant-Power Chassis The iConverter 5-Module Chassis is designed for Enterprise Local Area Network (LAN) and Metropolitan Area Network (MAN) applications where fault tolerance and reliability are essential. The 1U (1.75 inch) high iConverter 5-Module Chassis has redundant power supplies and can be mounted in a 19-inch or 23-inch rack. The 5-Module Chassis features two hot-swappable redundant power supplies. Universal AC, 24VDC and 48VDC powering options are available. The redundant power supplies operate in load-sharing mode to reduce the burden on each power supply to extend the lifetime and fault tolerance. Power is provided to up to five iConverter modules via the chassis backplane. When used with an iConverter management module, the management capabilities include the ability to monitor the voltage, current and temperature of each power supply. Any out of range violation can trigger an SNMP trap to allow quick corrective maintenance. In addition to handling the power and management data for each iConverter module, the 5-Module Chassis backplane allows sharing of Ethernet data between the individual modules. iConverter modules that are installed in adjacent slots and equipped with Ethernet backplane ports have the ability to connect to each other via the chassis’ Ethernet backplane and facilitate a variety of flexible management options including unmanaged, out-of-band managed, in-band managed and multi-port configurations. The high reliability of the redundant power system combined with its AC and DC power options and its ability to hold five converters in a 1U height make the 5-Module Chassis the ideal choice in a Central Office (CO), Customer Premises (CPE), multi-tenant (MTU) or for Point of Presence (POP) applications where reliability and space are critical. The iConverter 5-Module Chassis supports the entire family of iConverter fiber media converters. All iConverter modules are hot-swappable and support multiple mounting options. In addition to the 5-Module Chassis, they can be mounted in a 19-Module (2U, 3.5 inch high) space-saving rack-mountable chassis (19-inch or 23-inch) with triple redundant AC, 24VDC and 48VDC power supplies, in a 2-Module AC or 18-60VDC power chassis or in a 1-Module AC power chassis. Modules not included KEY FEATURES ■■ The iConverter 5-Module Chassis is 1U (1.75 inch) high and supports 19-inch or 23-inch rack mounts ■■ Redundant, hot-swappable AC, 24VDC and 48VDC power supplies for mission critical networks ■■ NEBS Level 3 Compliant ■■ Ethernet backplane allows modules to share data and support a wide variety of network applications ■■ Fiber Cable Management Tray available for highdensity CWDM deployments ■■ All iConverter modules are hot-swappable when used with the 5-Module Chassis ■■ Management is available with the addition of a management module to the chassis ■■ SNMP management via NetOutlook® provides real-time port and module status information, remote parameter configuration and trap notification ■■ Commercial (0 to +50° C) and wide (-40 to +60° C) temperature ranges ■■ Lifetime Warranty and free 24/7 Technical Support MANAGEMENT ORDERING INFORMATION Management provides remote configuration, monitoring and trap notification. Management of the chassis and modules is accomplished by installing an iConverter Management Module (NMM2) or Network Interface Device (NID) in the same chassis. 5-Module Chassis Description The Management Module can be accessed via SNMP, Telnet and serial port. The chassis and modules can be managed with Omnitron’s intuitive, graphic-oriented NetOutlook SNMP Management Software or third party SNMP management software. Management via the Telnet and the serial interfaces have an easy-to-use, menu-driven interface. 8220-1 8221-1 8226-1 8225-1 8227-1 Two (2) Power Supplies 8220-2 8221-2 8226-2 8225-2 8227-2 Spare Power Supply 8220-9 8221-9 8226-9 8225-9 8227-9 Contact Omnitron for extended temperature (-40 to 75°C) and RoHS (5/6) compliant models. High Airflow power supplies (66W) cannot be installed in the same chassis with other types of power supplies. Use the Power Calculator to determine the iConverter chassis power supplies required for your module configuration. Accessories In addition, the power supply modules can generate SNMP traps for out of voltage or chassis temperature range violations. All of these events can selectively enabled or disabled to generates SNMP traps. Model Number Description 8092-2 23” Rack Mount Kit 8096-1 19” Cable Management Tray 8096-2 23” Cable Management Tray 8090-0 Blank Module Panel NOTE: Dying gasp is only supported when a Management module is installed in a 1-Module or 2-Module chassis with dying gasp support. 5-Module chassis does not support dying gasp. SPECIFICATIONS Model Number One (1) Power Supply For wide temperature (-40 to 60°C) add a “W” to the end of the model number. Fixed parameters that can be monitored on the 5-Module Chassis include the chassis type and model, manufacturing information, along with hardware and software revisions and serial numbers of the power supplies. Description 5-Module AC 5-Module AC* High Airflow 5-Module 24VDC 5-Module 48VDC 5-Module 48VDC* High Airflow 8220-x 8221-x 8226-x 8225-x 8227-x 1 or 2 1 or 2 Module Capacity Power Supply Capacity AC 48VDC AC High 24VDC 48VDC High (33 watts) Airflow (33 watts) (33 watts) Airflow (66 watts) (66 watts) 5 1 or 2 Regulatory Compliance 1 or 2 1 or 2 UL, CE, FCC Class A, NEBS Level 3, RoHS2 (6/6), WEEE, REACH Input Power Requirements (typical) 100 to 240VAC 50/60Hz 0.5A @ 120VAC 100 to 240VAC 50/60Hz 1.5A @ 120VAC +/- 18 to 36VDC 1.4A @ 24VDC +/- 36 to 60VDC 0.7A @ 48VDC +/- 36 to 60VDC 2.0A @ 48VDC Output Power 33 watts 10A @ 3.3VDC 66 watts 20A @ 3.3VDC 33 watts 10A @ 3.3VDC 33 watts 10A @ 3.3VDC 66 watts 20A @ 3.3VDC Power Connector IEC 320 Socket IEC 320 Socket 3-Pin Terminal (Isolated) 3-Pin Terminal (Isolated) 3-Pin Terminal (Isolated) W: 17.15” x D: 9.0” x H: 1.75” L: 435.6 mm x B: 228.6 mm x H: 44.5 mm Dimensions With 1 Power Supply: With 2 Power Supplies: Weight Commercial: Wide: Storage: Temperature Humidity 7.5 lbs (3.40 kg) 9.0 lbs (4.08 kg) 0 to 50°C -40 to 60°C -40 to 80°C 5 to 95% (non-condensing) Altitude -100m to 4,000m 1 Power Supply: 43,000 2 Power Supplies: 173,000 MTBF (hrs) Warranty 2 Power Supplies: 90,000 1 Power Supply: 49,700 2 Power Supplies: 198,000 1 Power Supply: 49,700 2 Power Supplies: 198,000 2 Power Supplies: 90,000 Lifetime warranty with 24/7/365 free Technical Support * Agency compliances are pending. Required for iConverter XG+ models. Register at www.omnitron-systems.com to download the iConverter XG+ Usage Guide. © 2016 Omnitron Systems Technology, Inc. All rights reserved. iConverter and NetOutlook are Registered Trademarks of Omnitron Systems Technology, Inc. Trademarks are owned by their respective companies. Specifications are subject to change without notice. 091-18220-001K 6/16 800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [email protected] • 38 Tesla, Irvine, CA 92618 iConverter 5-Module Chassis Page 2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project