Expand your options Test solutions for WCDMA/HSPA(+)

Expand your options Test solutions for WCDMA/HSPA(+)
Expand
your options
Test solutions for
WCDMA/HSPA(+)
I HSPA(+)
I LTE/LTE-A
I WiMAX™
I MIMO
WCDMA/HSPA(+)
Leading the way
to LTE
Universal mobile telecommunication system (UMTS) networks based on wideband code division multiple access
(WCDMA) have been widely deployed worldwide. For further performance improvements, UMTS has mapped a clear
evolutionary path to high speed packet access (HSPA), which
offers data rates of up to 14 Mbit/s in the downlink and
5.76 Mbit/s in the uplink. HSPA also boosts capacity in UMTS
networks and provides significant latency reductions.
To exploit the full potential of WCDMA 5 MHz operation,
the performance of HSPA-based radio networks has been
further enhanced. HSPA+ as specified in 3GPP Release 7
and 8 includes downlink MIMO operation, higher-order
modulation (downlink 64QAM, uplink 16QAM) and protocol
improvements. A high number of users that are “always on”
can be supported in the network. HSPA+ enables peak data
rates of 42 Mbit/s in the downlink and 11 Mbit/s in the uplink with round-trip times below 50 ms.
3GPP Release 9 continues to improve primarily data rate
capabilities. The dual-cell HSUPA feature supports two carrier frequencies in the uplink direction, leading to uplink
data rates of 23 Mbit/s. In the downlink direction, dualcarrier operation can be combined with the MIMO feature
to reach data rates up to 84.4 Mbit/s. Spectrum flexibility
has also been increased because the dual-band dual-cell
HSDPA feature makes it possible to allocate resources on
two carrier frequencies in different frequency bands.
The latest 3GPP Release 10 specification includes 4C-HSDPA,
which makes it possible to pool even four carrier frequencies for a single end-user device, spanning a bandwidth
of 20 MHz.
R&S®CMW500 wideband radio communication tester.
Rohde & Schwarz offers a complete portfolio of WCDMA/
HSPA/HSPA+ test and measurement solutions addressing infrastructure equipment, wireless devices and their
components such as power amplifiers. As pioneer in the
market with the first one-box radio communication tester
for HSPA, Rohde & Schwarz has continued this success
story by bringing the first signal generator solutions for
HSPA+ to market. They include MIMO precoding and 2x2
MIMO realtime fading in a single instrument. Furthermore,
the R&S®CMW500 is the leading wideband radio communication tester, supporting all major wireless communications standards in one box.
Rohde & Schwarz is your single-source supplier for comprehensive test equipment covering all wireless standards.
See brochures on LTE, GSM/EDGE, WiMAX™, MIMO,
CDMA2000® 1xRTT/1xEV-DO, wireless connectivity, etc.
For further information, please visit:
www.rohde-schwarz.com/technologies
Application notes
Description
Number
Two-Channel Method for OTA Performance Measurements
of MIMO-enabled Devices
1SP12
How to Run WCDMA BER/BLER Tests Using
Rohde & Schwarz Vector Signal Generators
1MA144
Versatile RF Fading Simulator with R&S®FSQ/R&S®FSG or
R&S®FSV and R&S®SMU200A
1MA145
PESQ® Measurement for WCDMA with R&S®CMUgo
1MA137
Operating Guide for WCDMA Test Setup according to
3GPP TS34.121
1CM71
Measurements on 3GPP UE‘s according to TS34.121 with
R&S®CMUgo: Tests with combined Instruments
1MA130
Operation Guide for HSDPA Test Setup according to
3GPP TS 34.121
1CM72
Operation Guide for HSUPA Test Setup according to
3GPP TS 34.121
1CM73
Production Measurements on 3GPP WCDMA Femtocells
1MA139
WCDMA/CDMA2000® Intermodulation Calibration for Zero
IF Chipsets
1CM54
Introduction to MIMO Systems
1MA102
HSPA+ Technology Introduction
1MA121
CDMA2000® is a registered trademark of the Telecommunications Industry
­Association (TIA - USA).
WiMAX is a trademark of the WiMAX Forum.
R&S®SMU200A vector signal generator.
Test and measurement
solutions for WCDMA/HSPA(+)
Development Development Verification & Production & Network
deployment &
of RF &
of protocol
conformance service
optimization
baseband
stack
tests
Product
Wireless communications testers & systems
R&S®CMW500
wideband radio communication tester
●
R&S®CMU200 radio communication tester
●
R&S®CRTU protocol testers
R&S®TS8980 RF conformance test systems
●
R&S®TS8991 OTA performance test system
R&S®TS895xGW RF test system family
●
R&S®TS8996 RSE test system
R&S®DST200 RF diagnostic chamber
●
●
●
●
●
●
●
●
●
●
○
○
R&S®TS712x shielded RF test chambers
Spectrum & signal analyzers
R&S®FSW signal and spectrum analyzer
R&S®FSU spectrum analyzer
R&S®FSQ signal analyzer
R&S®FSMR measuring receiver
R&S®FSUP signal source analyzer
R&S®FSG spectrum analyzer
R&S®FSVR real-time spectrum analyzer
R&S®FSV signal and spectrum analyzer
R&S®FSL portable spectrum analyzer
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
○
○
○
○
●
●
●
○
○
●
●
●
●
●
R&S®FSH handheld spectrum analyzer
R&S®ZVH cable and antenna analyzer
●
●
●
●
○
Signal generators
R&S®SMU200A vector signal generator
with optional fading simulator
R&S®SMATE200A vector signal generator
R&S®SMJ100A vector signal generator
R&S®SMBV100A vector signal generator
R&S®SMA100A, R&S®SMB100A signal generators
R&S®SMF100A microwave signal generator
R&S®AMU200A baseband signal generator
and fading simulator
R&S®AFQ100A/B I/Q modulation generators
R&S®EX-IQ-Box digital signal interface module
●
●
●
●
○
○
○
○
●
●
●
Network analyzers
R&S®ZVx/ZNx vector network analyzers
Oscilloscopes
R&S®RTx digital oscilloscopes
Drive test tools
R&S®TSMx radio network analyzers
●
●
●
R&S®ROMES drive test software
R&S®ROMES2GO 3GPP walk test solution
EMC & field strength test solutions
○
○
R&S®TS9975 EMI test system
R&S®TS9982 EMS test system
Power meters
R&S®NRP2 power meter
R&S®NRP-Zxx power sensors
○
○
○
○
○
○
Audio analyzers
R&S®UPV audio analyzer
R&S®UPP audio analyzers
●
○
●
●
○
○
○
○
Power supplies
R&S®NGMO power supply
○ General use
● WCDMA/HSPA(+)-specific use
Rohde & Schwarz Test solutions for WCDMA/HSPA(+) 3
About Rohde & Schwarz
Rohde & Schwarz is an independent group of
companies specializing in electronics. It is a
leading supplier of solutions in the fields of
test and measurement, ­broadcasting, radiomonitoring and radiolocation, as well as secure
communications. Established more than
75 years ago, R
­ ohde & Schwarz has a global
presence and a dedicated service network in
over 70 countries. Company headquarters are
in Munich, Germany.
Environmental commitment
❙❙ Energy-efficient products
❙❙ Continuous improvement in environmental
sustainability
❙❙ ISO 14001-certified environmental
management system
Certified Quality System
ISO 9001
Service you can rely on
JWorldwide
and personalized
and flexible
J Uncompromising quality
J Long-term dependability
Rohde & Schwarz GmbH & Co. KG
Mühldorfstraße 15 | 81671 München
Phone +49 89 41 290 | Fax +49 89 41 29 121 64
J Local
J Customized
www.rohde-schwarz.com
Regional contact
❙❙ Europe, Africa, Middle East | +49 89 4129 12345
[email protected]
❙❙ North America | 1 888 TEST RSA (1 888 837 87 72)
[email protected]
❙❙ Latin America | +1 410 910 79 88
[email protected]
❙❙ Asia/Pacific | +65 65 13 04 88
[email protected]
❙❙ China | +86 800 810 8228/+86 400 650 5896
[email protected]
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG
Trade names are trademarks of the owners | Printed in Germany (sv)
PD 0758.1941.62 | Version 04.00 | October 2011
Test solutions for WCDMA/HSPA(+)
Data without tolerance limits is not binding | Subject to change
© 2008 - 2011 Rohde & Schwarz GmbH & Co. KG | 81671 München, Germany
0758194162
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement