advertisement
MG12
COMMERCIAL AUDIO - ANALOG MIXERS
12-Channel Mixing Console: Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo) / 2 GROUP
Buses + 1 Stereo Bus / 2 AUX (incl. FX)
• 12-Channel Mixing Console
• Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo)
• 2 GROUP Buses + 1 Stereo Bus
• 2 AUX (incl. FX)
• “D-PRE” mic preamps with an inverted Darlington circuit
• 1-Knob compressors
• PAD switch on mono inputs
• +48V phantom power
• XLR balanced outputs
• Internal universal power supply for world-wide use
• Optional Rack Mount Kit RK-MG12 Available
• Metal chassis
• 308 mm x 118 mm x 422 mm (12.1" x4.6" x16.6")
• Net Weight: 4.0 kg (8.8 lbs.)
1
2
MG12
COMMERCIAL AUDIO - ANALOG MIXERS
Spécifications
General specifications
Total harmonic distortion
Hum & noise level
Crosstalk
Power requirements
Dimensions
Equivalent input noise
Residual output noise
W
H
D
Net weight
Accessories
Frequency response
Power consumption
Others
0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005
% @ +24dBu (1kHz), GAIN knob: Min
-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
-102 dBu (STEREO OUT, STEREO master fader: Min)
-78 dB
AC 100 – 240 V, 50 / 60 Hz
308 mm (12.1")
118 mm (4.6")
422 mm (16.6")
4.0 kg (8.8 lbs.)
Included Accessory: Owner’s Manual, Technical
Specifications, AC power cord, Optional Accessory:
Rack-mount kit RK-MG12
+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
22 W
Operating Temperature: 0 to +40˚C
MG12
COMMERCIAL AUDIO - ANALOG MIXERS
Spécifications
Outline
I/O
Bus
Input Channel Function
Input Channels
Output Channels
Phantom power
PAD
HPF
COMP
EQ HIGH
EQ MID
EQ LOW
PEAK LED
Level Meter
Mono[MIC/LINE]
Mono/Stereo[MIC/LINE]
Stereo[LINE]
STEREO OUT
MONITOR OUT
PHONES
AUX SEND
GROUP OUT
2
2
1
1
2
2
4
2
+48 V
Stereo: 1, GROUP: 2, AUX: 2
26 dB (Mono)
80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB
Attack time: approx. 25 msec, Release time: approx. 300 msec
Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking
Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
LED turns on when post EQ signal reaches 3 dB below clipping
2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10,
-15, -20, -25, -30 dB]
3
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project