SZH BT272.cdr - Slanzer Technology
Gadgets Redefined
BLUETOOTH HEADPHONE
Model No. : SZH
Thank you for purchasing our company's Bluetooth Headphones.
Please read this user manual carefully in order to operate this
product correctly.
1. NOTICE
Please store and use this product at a normal temperature
DO NOT expose this product to rain or damp areas
DO NOT throw or drop this product
DO NOT disassemble, repair, or modify this product
This product has a lithium battery, to avoid danger DO NOT place
it near or in a fire
BT272
V. PACKING LIST
1. Headphone * 1
2. USB cable for charging* 1
3. User manual * 1
BLUETOOTH OPERATION
1. Press and hold power button to turn on the headphones. The blue
indicator light will flash to detect Bluetooth enabled devices near you.
The blue indicator light will go out if no Bluetooth device is detected
within 5 minutes.
2. Pair the headphone with the desired Bluetooth device.
3. Play/Pause as desired by pressing Multi-Function Dial.
2. KIND REMINDER
4. To answer an incoming phone call while using the headphones, press
1. To prolong the headphones life span and to avoid hearing damage,
the
Multi-Function Dial button once. To end the phone call, re-press the
please do not listen to music under high volume for long periods of time.
Multi-Function
Dial button. Press the Multi-Function Dial twice to dial
2. When an error occurs with the headphones, please turn off the
the
last
product and restart to troubleshoot.
3. When the headphone power is low, the Bluetooth range may be
affected. Please charge the headphones to avoid disruptions during
use.
5.number dialed.
3. OVERVIEW
1. Turn on the headphone
2. Insert a 3.5mm audio cable into the AUX jack on the back of the
headphone. Connect the 3.5mm cable to any audio device with a port.
3. Press the Multi-Function Dial button to play or pause music.
AUX PLAYBACK OPERATION
CHARGING THE SPEAKER
Multi-Function Dial:
Volume Down / Previous Song
Next Song /Volume Up
Play & Pause / Call pick-up & hang-up
Press and hold for 2-5 seconds to turn the headphone ON or OFF
4. SPECIFICATION
Bluetooth specification: Bluetooth V2.1 EDR
Transmission distance : ≦ 10M ( It varied when the environmental
factors and the connected Bluetooth devices are different )
USB charging voltage: DC 5V/500mA
Built-in battery: Lithium battery,250mAh
Output power: 30mW
Frequency response: 20Hz-20KHz
Sensitivity: 105db
1. The headphone has a built-in Lithium battery. The battery is
rechargeable and provides approximately 6 hours of continuous use
at 70% volume when fully charged.
2. Use the micro-USB cable to charge the headphone. The red
indicator light will illuminate when the battery is low. The red
indicator light will go out when the headphone is fully charged.
7. COMPATIBILITY
Devices equipped with Bluetooth 2.1 or higher (for details please
refer to the user manual of that device). Bluetooth 3.0 including
agreements as:A2DP, AVRCP, HFP.
VIII. TROUBLESHOOTING
PROBLEM
TROUBLESHOOTING
Failure to connect or pair
the headphones to an audio device
1. Confirm the device you wish to pair with the headphone has Bluetooth capabilities
2. Check battery life, headphones may need to be charged
3. Inspect whether the headphone is in the status of searching for Bluetooth device.
4. There may be too many Bluetooth enabled devices in the area, please turn off Bluetooth
function on devices you do not want to pair with the headphones.
The sound is too low or distorted
1. Inspect the volume of the Bluetooth equipment and adjust the volume.
2. The battery life is low, please charge the headphones.
Discontinuous music
1.Move the paired Bluetooth device closer to the headphones.
2.Make sure there are no obstacles between the Bluetooth device and the headpones.
The indicator light for
Bluetooth mode is not on
1.The battery is too low. Please charge the headphones and try again.
2.Restart the headphones by powering off and turning back on.
Hints: Another trouble, please consult the dealer or an experienced IT technician for help.
Slanzer technology Pvt. Ltd.
Visit us at : www.slanzer.in or write to us at [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement