Mobile Pairing Guide

Mobile Pairing Guide
InduraPower
Mobile App Pairing Guide P1
Intelligent Battery Series
Pairing a Smartphone or Tablet Application
The Smartphone / Tablet Telemetry screen allows monitoring of the battery and some remote control of the
battery’s power output and configuration settings.
Monitoring of battery:
1. Battery Internal Voltage- battery cell total voltage
2. Battery Terminal Voltage- Voltage that is available at (+) terminal of battery
3. Battery Capacity- current battery capacity level (displayed in percentage and actual levels).
4. Power OFF mode status- shows if ON or OFF.
5. Battery/Smartphone device connection status- will show Green LED displayed for connection.
6. Battery Temperature- will show temperature of battery in metric or imperial mode.
7. Module Voltage- Internal voltage of battery module (same as above if only 1 module used as in
108 Series, 110 Series, and 120 Series batteries).
8. Module Current- charging or discharging current will be displayed for module.
9. Module temperature- Temperature of module will be displayed.
10. Module Capacity- display of current capacity of module.
Monitoring of battery:
1. Low Power Mode- enable or disable mode. If more than one module, all modules will be synced.
2. One Last Start Mode- enable or disable mode. If more than one module, all modules will be synced.
3. Power OFF Mode- enable or disable mode. If more than one module, all modules will be synced.
4. Heater On Mode- enable or disable mode. If more than one module, all modules will be synced.
Battery Telemetry Display:
Smartphone
Tablet
InduraPower
Mobile App Pairing Guide P2
Intelligent Battery Series
Pairing a Smartphone or Tablet Application
Start using the Application:
1. Select Application Icon for battery telemetry
2.
Login to the application. If not registered, create a username
and password by selecting Register. You can bypass this step
by selecting Continue Without Login. (see right image)
3.
After logging in, an InduraPower splash screen
will be displayed. On the top left side of the
screen, select the menu icon. In the menu list,
select Connect New Batteries.
4.
After selecting Connect New Batteries, a
pop-up screen appears requesting a name
for the battery module. Enter a name for
the your battery.
InduraPower
Mobile App Pairing Guide P3
Intelligent Battery Series
Pairing a Smartphone or Tablet Application
5.
After creating a name and selecting OK, select
the model series for you InduraPower battery.
6.
After selecting the Series, select the vehicle
type Icon for your battery installation.
7.
Before proceeding, the battery module
Bluetooth must to be enabled. If battery
module is flashing Green and Blue
alternatingly, the modules Bluetooth
capabilities are already enabled and pairing
should occur. If battery module’s Led is
flashing Green and Yellow, then Bluetooth
capabilities of module is disabled.
8.
After creating a battery name, select the
select the battery from the screen list.
To proceed with the pairing process,
Bluetooth must be enabled. For instruction
to enable Bluetooth see Page 5 in the
InduraPower User Guide.
InduraPower
Mobile App Pairing Guide P4
Intelligent Battery Series
Pairing a Smartphone or Tablet Application
9.
Next, the application telemetry page will be displayed. After a few seconds, a pop-up window will
appear requesting the battery module’s serial number. Enter the serial number manually or use a
smartphone (or tablet) camera to scan serial number.
10. After the battery module is successfully paired, the battery telemetry screen will begin displaying battery
The battery’s remote control switches will also be available. Note that Display LED on the Application will
display Green when Bluetooth communication is active. Swipe the screen to the left for additional info.
InduraPower
Mobile App Pairing Guide P5
Intelligent Battery Series
Pairing a Smartphone or Tablet Application
12. To select the Charge / Discharge telemetry page,
swip the screen or Tap the blue button on iOS.
Some of the app pages have scrolling enabled.
13. To add more batteries to the App, go to the
menu on the battery selection page and
select “Connect New Batteries”.
InduraPower
Mobile App Pairing Guide P6
Intelligent Battery Series
Smartphone / Tablet Remote Control
Low Power Mode
1. On Application telemetry display page, tap the Low Power Mode switch. Switch will toggle from left to right
and switch color will change from white to light blue which indicates mode is ON.
2. To turn mode OFF, tap the Low Power Mode switch. Switch will toggle from right to left and change color
from light blue to white which indicates mode is OFF.
Power OFF Mode
1. On Application telemetry display page, tap the Power OFF Mode switch.
2. A message will appear: “This procedure will disconnect battery, do you want to continue?”.
3. To continue press OK. Selecting CANCEL will not enable mode.
4. Switch will toggle from left to right and switch color will change from white to light blue which indicates
mode is ON. Below the switch, a display is shown that shows status of the Power OFF mode (ON or OFF).
5. To turn mode OFF, tap the Power OFF Mode switch. Switch will toggle from right to left and change color
from light blue to white which indicates mode is OFF.
One Last Start Mode
1. When battery is discharged to a point where vehicle will not start, selection of “One Last Start” will
disable battery from Under-Voltage Protection mode.
2. To activate “One Last Start” mode, slide switch from left to right.
3. Start vehicle within 30 seconds of activating mode (switch will show active mode by remaining switch
to the right side).
Heater On Mode
1. To warm battery using battery heater, select Heater ON switch by sliding switch to the right.
2. Heater will remain ON until battery temperature reaches 30degC or 10 minutes.
3. While ON, switch will be displayed ON (to the right side).
Contact Information:
Indurapower
1668 S. Research Loop, #332
Tucson, AZ 85710 USA
Phone: +1(520)499-3799
Fax: +1(520)499-3827
Email: [email protected]
PN: 020-01020-00_0A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement