Connecting to eduroam Windows 7 Step 1 a) Click on the 'Wireless Network Connections' icon on the taskbar. Step 2 a) Click on the 'Open Network and Sharing Centre' link located at the bottom of the available network list. Step 3 a) Click on the 'Setup up a new connection or network' link. Connecting to eduroam Windows 7 Step 4 a) b) Select 'Manually connect to a wireless network'. Click Next to continue. Step 5 a) b) c) d) e) Enter 'eduroam' as the Network Name'. Select 'WPA2-Enterprise' as the Security Type. Select 'AES' as the Encryption Type. Check 'Start this connection automatically' if you would like to automatically connect to the eduroam network (This step is optional). Click 'Next' to continue. Connecting to eduroam Windows 7 Step 6 a) Click 'Change connection settings'. Step 7 a) b) c) d) Click on the 'Security' tab. Ensure that the Security type selected is 'WPA2-Enterprise'. Ensure that the Encryption type is 'AES'. Click the 'Settings' button. Connecting to eduroam Windows 7 Step 8 a) b) Un-check 'Validate server certificate' option. Make sure no certificates have been selected. Click the 'Configure' button. Step 9 a) b) Un-check 'Automatically use my Windows logon name and password'. Click 'OK' Click 'OK' on the Protected EAP Properties window. Connecting to eduroam Windows 7 Step 10 Click the 'Advanced settings' button. Step 11 a) b) c) Ensure 'Specify authentication mode:' is checked. Ensure 'User authentication' is selected. Click 'OK'. Click 'OK' on the eduroam Wireless Network Properties window. Click 'Close' on the manually connect to a wireless network window. Connecting to eduroam Windows 7 Step 12 Check to make sure you have set up your proxy settings. Open up internet explorer and click on tools from the list select internet options a) b) Select the ‘Connections’ tab Click the ‘LAN Settings’ button Step 13 a) Under the ‘Automatic Configuration’ heading select the check box next to ‘Automatically detect settings’ Close all windows Note: Make sure your wireless is turned on. Note: To complete the following steps you must be in range of the wireless network. Connecting to eduroam Windows 7 Step 14 Click on the 'Wireless Network Connections' icon on the taskbar. a) Connect to the eduroam network by clicking the connect button Step 15 When prompted: 1. 2. 3. Enter your student email address for example [email protected] Enter your password. Click 'OK'. Step 16 Open your web browser to start browsing the web.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project