INGUN Cable Test Probes

INGUN Cable Test Probes
M-PR-0008: 08/15 EN-1.1
Plug Connector Contacting
Flat Connector, Jacks and Pins, FAKRA, HSD, USB, RJ45
Test Probes · Test Fixtures
Plug connectors are not only on cables, but also mounted on various PCBs for electronic devices, for example,
radio- and navigation systems, PCs, laptops, control
units and smart devices. These can be various plug
connectors, such as flat connectors, jacks, pins, FAKRA,
HSD, USB or RJ45.
Cable Test Probes
Testing of Cable Harness
Contacting of Plug Connectors
Test Probes
and
Test Fixtures
by
INGUN
INGUN offers various test probes depending on the plug
connector.
Headquarters
INGUN Germany
For example, non-rotating probes are used to test flat
connectors. This ensures a correct alignment. Depending
whether jacks or pins are used, there are many various tip
styles and spring forces available.
Subsidiaries
INGUN Benelux
INGUN China
INGUN India
INGUN Korea
INGUN Mexico
INGUN España
INGUN Switzerland
INGUN UK
INGUN USA
The test probes are often installed in an approach mechanism to perform the tests.
You will find a comprehensive overview of the
cable test probes available in our current test
probe catalogue.
Europe
Austria
Benelux
Bosnia-Herzegovina
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Hungary
Italy
Norway
Poland
Portugal
Romania
Serbia
Slovenia
Slovak Republic
Spain
Sweden
Switzerland
Turkey
United Kingdom
Asia
China
Hong Kong
India
Israel
Japan
Korea
Malaysia
Taiwan
Thailand
Vietnam
The addresses of our
international agencies
can be found under
www.ingun.com
Africa
South Africa
Tunisia
Australia
Australia
New Zealand
America
Argentina
Brazil
Canada
Mexico
USA
INGUN Prüfmittelbau GmbH
Cable Harness Testing
Cable Test Probes
Cable Test Probes
Connection Test, Position Test, Push-back Test, Function Test
Applications and Products
Applications and Products
Cable harnesses are the central connection elements
between various components in the automotive industry
and mechanical engineering, and supply these with either
power or signals.
Screw-in probes for universal use
A cable harness consists of several cables with pre-wired
plugs. The plugs connected with their contact terminals are
responsible for secure contact.
Many test probes to plug in offered by INGUN are
also available as a screw-in version. Thus, a secure
hold during testing is guaranteed.
Screw-in probes are especially recommended for
applications with possible vibrations or unwanted
side forces and axial forces.
Step probes for position test
The connection test checks whether the pre-wired cable is
connected in the correct position in the connector housing.
The position test ensures the correct position of the contact
terminals in the connector housing. The push-back test is
carried out to verify whether or not the contact terminals
can be pushed back.
Push-back probes for push-back test
When finally plugging the plug connectors, it
is important that the contact terminals (contact
sheets) remain in the correct position and cannot
be pushed back.
For this test, push-back probes with a spring force
of up to 34 N are used.
During the function test the cable harness is tested
according to its intended purpose, with the corresponding
current and voltage.
INGUN offers a wide variety of cable test probes for
the above mentioned test procedures. These are usually
modules built into test benches, into which the plugs are
inserted.
INGUN Test Solutions - Made in Germany
•
•
•
•
•
•
•
•
•
Universal screw-in probes
Step probes
High current probes
Switching probes
Non-rotating test probes
Push-back probes
Dipole probes / 4-wire measurement
High frequency probes
Tools and accessories
•
•
•
•
•
•
GKS-050 M
GKS-075 M
GKS-100 M
GKS-112 M
GKS-113 M
...
INGUN products
Step probes are inserted in the connector housings
to test the correct position of the contact terminal
(contact sheets). A contact will only be produced
by the pin of the step probe when it is correctly
positioned.
INGUN offers a wide variety of step probes with
tip dimensions, stop collar (disk) dimensions, and
pin lengths.
To guarantee uninterrupted operation, high demands are
placed on the cable harness. The cable harness has to pass
various tests before it is fitted.
INGUN products
Non-rotating test probes
•
•
•
•
•
•
T-112 M
T-912 M
T-899 M
T-113 M
T-888 M
…
INGUN products
•
•
•
•
•
VF 25
VF 3
VF 4
VF 5
…
INGUN products
For testing flat connector blades or jacks which
can only be contacted in one position, nonrotating probes are used.
These probes are already aligned in the correct
position during assembly.
•
•
•
•
•
GKS-098 M
GKS-710
GKS-746 M
GKS-803 M
…
Switching test probes for universal component detection
A wide area of applications is possible with the
switching probes. When pressing the plunger the
circuit is closed in the probe.
Thus, the presence of components, open/closed
checks and many more can be realised for
instance.
High current probes for high current plug connectors
To transmit high currents, such as in function tests,
high current probes are used. Due to their design,
high current test probes have a very low internal resistance and warm only very slightly when
loaded.
The probes are also suitable for precise measurements.
Dipole test probes and high frequency probes
With dipole probes, 4-wire measurements to define resistance directly on the contact surface can
be carried out.
RF probes are used to securely transmit both
analogue and digital signals, either directly on the
PCB or plug connector, such as HSD or FAKRA.
Tools and accessories for optimal test quality
Various tools, such as torque wrenches and bit
inserts are available for optimal assembly of cable
test probes. Secure testing can only be guaranteed with test probes which have been correctly
screwed in.
A wide variety of accessories are offered in order
to realise the test requirements, such as side
approach mechanism (SAM).
INGUN products
•
•
•
•
•
SKS-100
SKS-215 MF
SKS-415
SKS-465 MF
…
INGUN products
•
•
•
•
•
•
HSS-118 M
HSS-120 M
HSS-150 M
HSS-621 M
HSS-623 M
…
INGUN products
•
•
•
•
•
•
DPS-215 M
DPS-465 M
HFS-810
HFS-819
HFS-840
…
INGUN products
•
•
•
•
•
DW-X-S
Bit-GKSxxx-M
AW-KS-SETCABLE
SAM
...
M-PR-0008: 08/15 EN-1.1
Plug Connector Contacting
Flat Connector, Jacks and Pins, FAKRA, HSD, USB, RJ45
Test Probes · Test Fixtures
Plug connectors are not only on cables, but also mounted on various PCBs for electronic devices, for example,
radio- and navigation systems, PCs, laptops, control
units and smart devices. These can be various plug
connectors, such as flat connectors, jacks, pins, FAKRA,
HSD, USB or RJ45.
Cable Test Probes
Testing of Cable Harness
Contacting of Plug Connectors
Test Probes
and
Test Fixtures
by
INGUN
INGUN offers various test probes depending on the plug
connector.
Headquarters
INGUN Germany
For example, non-rotating probes are used to test flat
connectors. This ensures a correct alignment. Depending
whether jacks or pins are used, there are many various tip
styles and spring forces available.
Subsidiaries
INGUN Benelux
INGUN China
INGUN India
INGUN Korea
INGUN Mexico
INGUN España
INGUN Switzerland
INGUN UK
INGUN USA
The test probes are often installed in an approach mechanism to perform the tests.
You will find a comprehensive overview of the
cable test probes available in our current test
probe catalogue.
Europe
Austria
Benelux
Bosnia-Herzegovina
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Hungary
Italy
Norway
Poland
Portugal
Romania
Serbia
Slovenia
Slovak Republic
Spain
Sweden
Switzerland
Turkey
United Kingdom
Asia
China
Hong Kong
India
Israel
Japan
Korea
Malaysia
Taiwan
Thailand
Vietnam
The addresses of our
international agencies
can be found under
www.ingun.com
Africa
South Africa
Tunisia
Australia
Australia
New Zealand
America
Argentina
Brazil
Canada
Mexico
USA
INGUN Prüfmittelbau GmbH
Cable Harness Testing
Cable Test Probes
Cable Test Probes
Connection Test, Position Test, Push-back Test, Function Test
Applications and Products
Applications and Products
Cable harnesses are the central connection elements
between various components in the automotive industry
and mechanical engineering, and supply these with either
power or signals.
Screw-in probes for universal use
A cable harness consists of several cables with pre-wired
plugs. The plugs connected with their contact terminals are
responsible for secure contact.
Many test probes to plug in offered by INGUN are
also available as a screw-in version. Thus, a secure
hold during testing is guaranteed.
Screw-in probes are especially recommended for
applications with possible vibrations or unwanted
side forces and axial forces.
Step probes for position test
The connection test checks whether the pre-wired cable is
connected in the correct position in the connector housing.
The position test ensures the correct position of the contact
terminals in the connector housing. The push-back test is
carried out to verify whether or not the contact terminals
can be pushed back.
Push-back probes for push-back test
When finally plugging the plug connectors, it
is important that the contact terminals (contact
sheets) remain in the correct position and cannot
be pushed back.
For this test, push-back probes with a spring force
of up to 34 N are used.
During the function test the cable harness is tested
according to its intended purpose, with the corresponding
current and voltage.
INGUN offers a wide variety of cable test probes for
the above mentioned test procedures. These are usually
modules built into test benches, into which the plugs are
inserted.
INGUN Test Solutions - Made in Germany
•
•
•
•
•
•
•
•
•
Universal screw-in probes
Step probes
High current probes
Switching probes
Non-rotating test probes
Push-back probes
Dipole probes / 4-wire measurement
High frequency probes
Tools and accessories
•
•
•
•
•
•
GKS-050 M
GKS-075 M
GKS-100 M
GKS-112 M
GKS-113 M
...
INGUN products
Step probes are inserted in the connector housings
to test the correct position of the contact terminal
(contact sheets). A contact will only be produced
by the pin of the step probe when it is correctly
positioned.
INGUN offers a wide variety of step probes with
tip dimensions, stop collar (disk) dimensions, and
pin lengths.
To guarantee uninterrupted operation, high demands are
placed on the cable harness. The cable harness has to pass
various tests before it is fitted.
INGUN products
Non-rotating test probes
•
•
•
•
•
•
T-112 M
T-912 M
T-899 M
T-113 M
T-888 M
…
INGUN products
•
•
•
•
•
VF 25
VF 3
VF 4
VF 5
…
INGUN products
For testing flat connector blades or jacks which
can only be contacted in one position, nonrotating probes are used.
These probes are already aligned in the correct
position during assembly.
•
•
•
•
•
GKS-098 M
GKS-710
GKS-746 M
GKS-803 M
…
Switching test probes for universal component detection
A wide area of applications is possible with the
switching probes. When pressing the plunger the
circuit is closed in the probe.
Thus, the presence of components, open/closed
checks and many more can be realised for
instance.
High current probes for high current plug connectors
To transmit high currents, such as in function tests,
high current probes are used. Due to their design,
high current test probes have a very low internal resistance and warm only very slightly when
loaded.
The probes are also suitable for precise measurements.
Dipole test probes and high frequency probes
With dipole probes, 4-wire measurements to define resistance directly on the contact surface can
be carried out.
RF probes are used to securely transmit both
analogue and digital signals, either directly on the
PCB or plug connector, such as HSD or FAKRA.
Tools and accessories for optimal test quality
Various tools, such as torque wrenches and bit
inserts are available for optimal assembly of cable
test probes. Secure testing can only be guaranteed with test probes which have been correctly
screwed in.
A wide variety of accessories are offered in order
to realise the test requirements, such as side
approach mechanism (SAM).
INGUN products
•
•
•
•
•
SKS-100
SKS-215 MF
SKS-415
SKS-465 MF
…
INGUN products
•
•
•
•
•
•
HSS-118 M
HSS-120 M
HSS-150 M
HSS-621 M
HSS-623 M
…
INGUN products
•
•
•
•
•
•
DPS-215 M
DPS-465 M
HFS-810
HFS-819
HFS-840
…
INGUN products
•
•
•
•
•
DW-X-S
Bit-GKSxxx-M
AW-KS-SETCABLE
SAM
...
Cable Harness Testing
Cable Test Probes
Cable Test Probes
Connection Test, Position Test, Push-back Test, Function Test
Applications and Products
Applications and Products
Cable harnesses are the central connection elements
between various components in the automotive industry
and mechanical engineering, and supply these with either
power or signals.
Screw-in probes for universal use
A cable harness consists of several cables with pre-wired
plugs. The plugs connected with their contact terminals are
responsible for secure contact.
Many test probes to plug in offered by INGUN are
also available as a screw-in version. Thus, a secure
hold during testing is guaranteed.
Screw-in probes are especially recommended for
applications with possible vibrations or unwanted
side forces and axial forces.
Step probes for position test
The connection test checks whether the pre-wired cable is
connected in the correct position in the connector housing.
The position test ensures the correct position of the contact
terminals in the connector housing. The push-back test is
carried out to verify whether or not the contact terminals
can be pushed back.
Push-back probes for push-back test
When finally plugging the plug connectors, it
is important that the contact terminals (contact
sheets) remain in the correct position and cannot
be pushed back.
For this test, push-back probes with a spring force
of up to 34 N are used.
During the function test the cable harness is tested
according to its intended purpose, with the corresponding
current and voltage.
INGUN offers a wide variety of cable test probes for
the above mentioned test procedures. These are usually
modules built into test benches, into which the plugs are
inserted.
INGUN Test Solutions - Made in Germany
•
•
•
•
•
•
•
•
•
Universal screw-in probes
Step probes
High current probes
Switching probes
Non-rotating test probes
Push-back probes
Dipole probes / 4-wire measurement
High frequency probes
Tools and accessories
•
•
•
•
•
•
GKS-050 M
GKS-075 M
GKS-100 M
GKS-112 M
GKS-113 M
...
INGUN products
Step probes are inserted in the connector housings
to test the correct position of the contact terminal
(contact sheets). A contact will only be produced
by the pin of the step probe when it is correctly
positioned.
INGUN offers a wide variety of step probes with
tip dimensions, stop collar (disk) dimensions, and
pin lengths.
To guarantee uninterrupted operation, high demands are
placed on the cable harness. The cable harness has to pass
various tests before it is fitted.
INGUN products
Non-rotating test probes
•
•
•
•
•
•
T-112 M
T-912 M
T-899 M
T-113 M
T-888 M
…
INGUN products
•
•
•
•
•
VF 25
VF 3
VF 4
VF 5
…
INGUN products
For testing flat connector blades or jacks which
can only be contacted in one position, nonrotating probes are used.
These probes are already aligned in the correct
position during assembly.
•
•
•
•
•
GKS-098 M
GKS-710
GKS-746 M
GKS-803 M
…
Switching test probes for universal component detection
A wide area of applications is possible with the
switching probes. When pressing the plunger the
circuit is closed in the probe.
Thus, the presence of components, open/closed
checks and many more can be realised for
instance.
High current probes for high current plug connectors
To transmit high currents, such as in function tests,
high current probes are used. Due to their design,
high current test probes have a very low internal resistance and warm only very slightly when
loaded.
The probes are also suitable for precise measurements.
Dipole test probes and high frequency probes
With dipole probes, 4-wire measurements to define resistance directly on the contact surface can
be carried out.
RF probes are used to securely transmit both
analogue and digital signals, either directly on the
PCB or plug connector, such as HSD or FAKRA.
Tools and accessories for optimal test quality
Various tools, such as torque wrenches and bit
inserts are available for optimal assembly of cable
test probes. Secure testing can only be guaranteed with test probes which have been correctly
screwed in.
A wide variety of accessories are offered in order
to realise the test requirements, such as side
approach mechanism (SAM).
INGUN products
•
•
•
•
•
SKS-100
SKS-215 MF
SKS-415
SKS-465 MF
…
INGUN products
•
•
•
•
•
•
HSS-118 M
HSS-120 M
HSS-150 M
HSS-621 M
HSS-623 M
…
INGUN products
•
•
•
•
•
•
DPS-215 M
DPS-465 M
HFS-810
HFS-819
HFS-840
…
INGUN products
•
•
•
•
•
DW-X-S
Bit-GKSxxx-M
AW-KS-SETCABLE
SAM
...
M-PR-0008: 08/15 EN-1.1
Plug Connector Contacting
Flat Connector, Jacks and Pins, FAKRA, HSD, USB, RJ45
Test Probes · Test Fixtures
Plug connectors are not only on cables, but also mounted on various PCBs for electronic devices, for example,
radio- and navigation systems, PCs, laptops, control
units and smart devices. These can be various plug
connectors, such as flat connectors, jacks, pins, FAKRA,
HSD, USB or RJ45.
Cable Test Probes
Testing of Cable Harness
Contacting of Plug Connectors
Test Probes
and
Test Fixtures
by
INGUN
INGUN offers various test probes depending on the plug
connector.
Headquarters
INGUN Germany
For example, non-rotating probes are used to test flat
connectors. This ensures a correct alignment. Depending
whether jacks or pins are used, there are many various tip
styles and spring forces available.
Subsidiaries
INGUN Benelux
INGUN China
INGUN India
INGUN Korea
INGUN Mexico
INGUN España
INGUN Switzerland
INGUN UK
INGUN USA
The test probes are often installed in an approach mechanism to perform the tests.
You will find a comprehensive overview of the
cable test probes available in our current test
probe catalogue.
Europe
Austria
Benelux
Bosnia-Herzegovina
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Hungary
Italy
Norway
Poland
Portugal
Romania
Serbia
Slovenia
Slovak Republic
Spain
Sweden
Switzerland
Turkey
United Kingdom
Asia
China
Hong Kong
India
Israel
Japan
Korea
Malaysia
Taiwan
Thailand
Vietnam
The addresses of our
international agencies
can be found under
www.ingun.com
Africa
South Africa
Tunisia
Australia
Australia
New Zealand
America
Argentina
Brazil
Canada
Mexico
USA
INGUN Prüfmittelbau GmbH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement