ew 512 G3 Presentation Set

ew 512 G3 Presentation Set
ew 512 © Presentation Set
RF Wireless Systems | evolution wireless G3
General Description
The system is ideal for hands-free vocal and speech applications and is
particularly well-suited for large stages. The extremely small SK 500 G3
bodypack transmitter and EM 500 G3 rack-mount receiver each features
20 frequency banks with 6 user banks 32 directly accessible frequency
presets each. Each system is ready for immediate use.
Technical Specifications
ew 500 ©
Modulation................................................... wideband FM
Frequency ranges...........................516–558, 566–608, ......................626–668, 734–776, 780–822, 823–865
Transmission/Receiving
frequencies................ 20 channel banks, 6 user banks,
..................................... 32 factory preset channels each
Switching bandwidth........................................... 42 MHz
Noise reduction system........................ Sennheiser HDX
AF frequency response.......................... 25 – 18,000 Hz
S/N ratio (at 1mV and peak deviation)...... ≥ 115 dBA
THD (at nominal deviation and 1 kHz).............≤ 0.9 %
EM 500 ©
Kit includes:
( 1) SK 500 G3 bodypack transmitter
( 1) EM 500 G3 rack-mountable receiver
( 1) MKE 2-ew Gold omni-directional clip-on microphone
( 1) GA 3 rack-mount kit
For recommended accessories please visit www.sennheiserusa.com
Features
Sturdy metal housing
PC-supported frequency management for transmitter and receiver
Tunable UHF frequencies within a large switching bandwidth
Programmable MUTE switch
Extremely small clip-on microphone
Ethernet port for connecting to the Wireless Systems Manager (WSM)
software for control via computer – this delivers a good overview of
monitoring and professional data management for multi-channel
systems
Wireless synchronization of transmitters via infrared interface
Enhanced frequency bank with up to 32 switchable frequencies
42 MHz bandwidth, 1,680 switchable frequencies
Increased range for audio sensitivity
Large, illuminated dot matrix display with dual color warning indicator
More control options (menu)
Enhanced AF frequency range
Soundcheck mode
Integrated equalizer
Switchable RF output power
(2) AA batteries for over 8 hours of use
4-level battery indicator for transmitter
Contacts for recharging the BA 2015 accupack directly in the transmitter
HDX compander for crystal-clear sound
True diversity receiver for optimum reception
Includes installation kit for 19” rack mounting
Receiver principle....................................... True Diversity
Sensitivity (with HDX,
peak deviation)....................... <2.5 µV at 52 dBAeff S/N
Adjacent channel rejection................................. ≥ 75 dB
Intermodulation attenuation............................. ≥ 70 dB
Blocking.................................................................. ≥ 75 dB
Pilot-tone squelch.......................................... detachable
Antenna inputs.......................................... 5 BNC sockets
AF output voltage (at peak deviation,
1 kHz AF)............................. 1/4“ (6.3 mm) jack socket,
...................................unbalanced: +12 dBu XLR socket,
............................................................. balanced: +18 dBu
Power supply......................................................... 12 V DC
Dimensions................................... 7.95“ x 8.35“ x 1.69“
Weight..................................................... approx. 2.16 lbs
SK 500 ©
RF output power at 50 Ω..................... typ. 30/10 mW,
............................................................................switchable
AF frequency response.............. 25 – 18,000 Hz (Line)
.........................................................80 – 18,000 Hz (Mic)
Max input voltage transmitter............................... 3 Veff
Input impedance
transmitter...........................40 kΩ, unbalanced / 1MΩ
Power supply..................................2 AA batteries, 1.5 V
Nominal voltage......................................................... 2.4 V
Operating time ..................................................... typ. 8 h
Dimensions................................... 3.23“ x 2.52“ x 0.94“
Weight...................................................... approx. 5.64 oz
MKE 2
Transducer principle...................................pre-polarized
...................................................... condenser microphone
Pick-up pattern..................................... omni-directional
Frequency response...................20 – 20,000 Hz ± 3 dB
Sensitivity (free field,
no load) (1 kHz)..................................5 mV/Pa ± 2.5 dB
Nominal impedance.................................................. 1 kΩ
Min. terminating impedance................................ 4.7 kΩ
Equivalent noise level
A-weighted (DIN IEC 651).......................................26 dB
CCIR-weighted (CCIR 468-3)...................................39 dB
Max. SPL.................................................................. 142 dB
Power supply.............................................................. 7.5 V
Supply current........................................ .approx. 250 µA
Connector........................................... LEMO f. SK 50/250
Cable length............................................................... 5.25“
Dimensions................................................................ 0.19“
ew 512 G3 Presentation Set
ew 512 © Presentation Set
RF Wireless Systems | evolution wireless G3
Architect and Engineering Specifications
The wireless microphone system shall feature a true-diversity receiver with 36 MHz of available tuning bandwidth with a total
of 1,680 frequencies accessible in 25 kHz steps. The wireless microphone receiver must feature one Balanced XLR output with a
max. output of +18 dBu, and one unbalanced ¼” output with a max. output of +12 dBu. The wireless microphone receiver must
feature two BNC antenna inputs, one for each receiver module in the true diversity system. The wireless microphone receiver must
feature a backlit display that displays AF and RF levels, battery telemetry from the transmitter, operating frequency, and diversity
switching information. The wireless microphone receiver must feature an automatic frequency scanning function that utilizes
eight banks of pre-coordinated frequencies that are free of intermodulation interference. The wireless microphone receiver must
also feature a user bank in order to store user defined frequencies. The wireless microphone transmitter must operate on two
1.5V AA battery cells. The wireless microphone transmitter must have access to 1,680 frequencies tuned in 25 kHz steps across a
defined 42 MHz bandwidth. The wireless microphone transmitter must feature a backlit display that displays frequency information, AF level, battery level. The wireless microphone transmitter must transmit a pilot-tone squelch. The wireless microphone
transmitter must have a specified RF output power of 30mW. The wireless microphone receiver must accept 12V DC power via
BNC antenna inputs.
Limited Product Warranty/Service
Sennheiser Electronic Corporation extends the following limited product warranty for Sennheiser products: The warranty period for all covered Sennheiser products is two years from the date of purchase. Not covered by this warranty are
accessories and other consumables; for example, items of wear and tear, such as cables. During the warranty period, Sennheiser
Electronic Corporation warrants that the Sennheiser equipment will be free from defects in materials and workmanship used
in making the product. Abnormal conditions, deliberate abuse and damage due to accidents, operator’s error, or unauthorized
service attempts are excluded from any warranty claims. Under this warranty, Sennheiser Electronic Corporation will repair, or
at its option, replace free of charge the covered defective Sennheiser product, provided it is returned (postage paid, with proof
of purchase from the original seller) to a Sennheiser Service Facility. Products should be returned in their original package, or
otherwise suitably protected to avoid shipping damage. Either product registration or a valid, dated proof of purchase is accepted
to establish the warranty period. The Sennheiser Service Department will be the sole authority to determine the validity of all
warranty issues.
This Limited Product Warranty is Sennheiser Electronic Corporation’s only warranty, and the customer’s only remedy concerning
Sennheiser products. All other representations and warranties, express or implied, written or oral, including, but not limited to,
any warranties of merchantability, fitness for a particular purpose, or non-infringement, are expressly excluded. As a result,
except as set forth in the previous paragraphs, the product is sold “as-is” and the customer is assuming the entire risk as to the
product’s suitability for his needs, its quality and its performance. In no event will Sennheiser Electronic Corporation be liable for direct, indirect, special, incidental or consequential damages
resulting from any defect in the product or from its use, even if advised of the possibility of such damages.
Sennheiser Electronic Corporation
One Enterprise Drive, Old Lyme, CT 06371
Tel: (860) 434-9190 • Fax: (860) 434-1759
www.sennheiserusa.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement