Network Camera System
N-VT2010
Network Video Transmitter
N-CC2360
(Lens is optional)
Network Color Camera
N-VR2010
Network Video Receiver
N-DR2000
Network Digital Recorder
with Ceiling Mount
Cover C-BC511C
N-CC2564
Network Combination Dome Camera
N-SD2000/N-SD0160
Software Decoder
DESCRIPTION
The TOA “Netcansee” is a Network Camera System that provides network-based transmission of video, audio and control signals.
For video transmission, the system employs Dual Stream image transmission to simultaneously transmit in two standards: MPEG4, which is ideally suited for transmitting moving pictures, and JPEG, for high-resolution image recording. Both PCM and ADPCM
are employed for audio transmission, enabling duplex transmission with excellent sound quality.
Two cameras are available. The N-CC2360 is a Network Color Camera that serves as a high-performance surveillance camera,
equipped with wide dynamic range, high sensitivity, and day/night functions. The N-CC2564, a Network Combination Dome
Camera, is a high-speed rotating camera featuring a 23X optical zoom lens and an array of automatic operational functions.
The N-VT2010 is the system's Network Transmitter, allowing conventional analog cameras and CCTV systems for image
transmission via the network.
The N-VR2010 is the Network Receiver for the Netcansee System. It converts analog video signals into digital signals, so that
images transmitted via the network can be viewed on a video monitor. A Network Video Recorder, the N-DR2000, is available to
enable simultaneous recording of both images and audio which are being delivered by a camera or transmitter that is connected to
the network.
By installing the system's N-SD2000 Software Decoder, images and audio captured by Netcansee System equipments connected
to the network can be monitored on a PC. The N-SD2000 also allows users to operate or choose settings for a Camera, Digital
Video Recorder or Multiplexer.
NTSC
SYSTEM FEATURES
■ Transmits MPEG-4 and JPEG simultaneously
(Dual Stream).
Transmission of MPEG-4, JPEG and sound simultaneously
Perform remote surveillance by means of
smoothly moving video images and high-quality sound.
• Monitors with smooth-movement images and records
high-quality still images.
• Image output sizes and frame rates can be varied as required
to satisfy bandwidth limitations of LAN and WAN networks.
LAN
MPEG-4
■ Utilizes MPEG-4ASP (Advanced Simple Profile)
• Accommodates transmission rates ranging from 16 kbps to
4Mbps.
• Can transmit D1-size (720 x 480) image output at 30 fps, with
image quality better than MPEG-2 CODEC (if same
transmission speed is maintained.)
• The MPEG-4ASP codec has improved compression efficiency
with enhanced interlacing and B-frame capabilities compared
to the conventional MPEG-4SP(Simple Profile) codec.
Sound
Recording of
High-quality
Images and
Sound.
■ Bidirectional, high-quality audio transmission
WAN
Sound
JPEG
Remote Monitoring of
smoothly moving
Images and Sound.
MPEG-4ASP
JPEG
Sound
N-DR2000
■ The Network Digital Recorder records digital data as
data is generated.
• Audio signals are available as uncompressed PCM or with
Subband A-DPCM compression. Audio can be bidirectionally
transmitted over a network along with images at an 8 kHz or
32 kHz sampling rate.
• Images from each network-based cameras can be recorded
as JPEG files and high quality audio recording is also possible.
• Recorded data can be searched at high speed and viewed
via network.
■ PoE (Power over Ethernet) eliminates need for a
dedicated power cable.
■ Able to withstand potential network problems to
maintain functioning as a surveillance system.
• As power is provided alongside data in the same cable over a
network, wiring requirements are minimized and the number
of cables are reduced as well (excluding network combination
dome cameras and network video recorders).
Recommended Personal Computer (for Software decoder)
■ Simultaneous real-time surveillance as well as
image/audio recording and playback on a PC with
the software decoder.
Personal Computer:PC/AT compatible (usable on a network)
Requirements:
CPU: Pentium 4, over 3 GHz
Memory: Over 512 MB
Display adapter: XGA (1024 x 768 pixels),
Recommended: Intel Chipset Usable on DirectX 9.0a or later
Sound controller: Usable over DirectX 9.0a or later
Network adapter: Over 100 BASE-TX
OS:
Windows XP Professional
Web Browser:
Internet Explorer 6.0 or later
* Pentium is a trademark of Intel Corporation.
* Windows is a trademark of Microsoft Corporation.
CONNECTION EXAMPLE
Network
Video Transmitter
N-VT2010
Analog
CCTV system
Network
Video Transmitter
N-VT2010
Combination Dome Camera
RS-485
PoE
PoE
PoE
To 24 V AC
PoE compatible
switching hub
Network Color Camera
N-CC2360
8
7
6
5
4
3
2
1
DC-IN
To AC Mains
Network Combination
Dome Camera
N-CC2564
Software Decoder
N-SD2000/N-SD0160
To 24 V AC
Network Video Recorder
N-DR2000
TM
R
D
RO
ER
HD
ER
W
PO
NETWORK V IDEO RECORDER N- DR2000
To AC Mains
Network Video Receiver
N-VR2010
Monitor
: Coaxial cable
: 10BASE-T/100BASE-TX
: 100BASE-TX/1000BASE-T
N-CC2360
Network Color Camera
SPECIFICATIONS
Power Source
Power Consumption
Power Terminal
Monitor Output
Microphone
Audio Output
Contact Input
Contact Output
Lens is optional
APPEARANCE AND DIMENSIONAL DIAGRAM
37.8
(1.49˝)
34
(1.34˝)
18(0.71˝)
2–1/4–20UNC
69.3(3.73˝)
154.3(6.07˝)
68(2.68˝)
64.8(2.55˝)
56.5(2.22˝)
157.3(6.19˝)
Unit: mm
FEATURES
• High-performance model allows mounting a CS lens and
includes Wide Dynamic Range and Day & Night functions.
• 24V AC or 24V DC operation is possible. Moreover, PoE
capability simplifies connectivity requiring just a single
LAN cable.
• The built-in microphone and audio output terminal allows
bidirectional audio transmission.
• Monitor output for connecting an analog video monitor display.
• Contact output × 2; Contact input × 2.
C-BC11
C-BC21
For ceiling mount
For wall/ceiling mount
C-BC41
For ceiling
mount
For wall/ceiling
mount
Network
Network I/F
Network Protocol
Video Compression/
Resolution
Frame Rate
Audio Compression/
Decompression
Audio Sampling Frequency
Image Transfer Rate
Simultaneous Connected
Number
Other Function
Operating Temperature
Operating Humidity
Application
Finish
Dimensions
Weight
Accessories
1/3 type IT-CCD
768 (H) X 494 (V) (380,000 pixels)
2:1 interlace
Horizontal: 15.734 kHz, Vertical: 59.94 Hz
Internal
0.5 lx (50 IRE), 0.1 lx (20 IRE) (F 1.0) (sensitivity up: OFF) (color mode)
0.01 lx (F 1.0) (sensitivity up: ON) (B&W mode, incandescent lamp)
1: 2000 (F 1.4 – 63)
46 dB (backlight compensation: wide dynamic ON)
WIDE DYNAMIC/ON/OFF
1/60, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Auto/Fixed/OFF
OFF, 2, 4, 6, 8, 10, 16, 24, 32, 64, times
ATW/AWB/Manual
CS mount
DC input type (4 pin connector)
Up to 16 characters (alphanumeric and symbols)
Privacy masking (up to 4), Electronic zoom (2x), Horizontal/Vertical reverse,
Flickering reduction (DIP switch), Focus adjustment switch (DIP switch),
Chroma level: Normal/manual (MIN – MAX),
Enhancer: Normal/Manual (soft – sharp)
10 BASE-T/100 BASE-TX. Auto/Manual: RJ45 connector
TCP, UDP, SIP, RTP, IGMP, HTTP, ARP, DHCP, DNS, SNTP, FTP, SMTP
MPEG-4, D1 (720 × 480), Half D1 (720 × 240), QVGA (320 × 240)
JPEG: D1 (720 × 480), Half D1 (720 × 240), VGA (640 × 480),
QVGA (320 × 240), QQVGA (160 × 120)
MPEG-4 (D1, max. 30 fps) + JPEG (D1, max. 5 fps)
Sub-band ADPCM, PCM (non-compression)
8 kHz, 32 kHz
MPEG-4: max. 4 Mbps
5 (MPEG-4: 4, JPEG: 1),
In streaming mode: No limit (MPEC-4 only)
Password authentication, Motion detection function
-10°C to 50°C (+14°F to +122°F)
(Continuously active for operation at temperature below 0°C (+32°F))
Under 90% RH (no condensation)
Indoor used
Case: Surface-treated steel plate, sand gray , paint
69.3 (W) × 64.8 (H) × 157.3 (D) mm 69.3 (2.73” × 2.55” × 6.19”)
670 g (1.43 lb)
CD-ROM (Software decoder: N-SD2000, Manual ((PDF)) × 1, Power conversion cable × 1
Note:
The following camera housings can be used for this camera: C-CH200FH/C-CH210FH
Dome type camera housings
Due to internal heat generation, other indoor- and outdoor-use camera housings cannot be used.
OPTIONAL LENSES (DC-input type)
CAMERA MOUNT BRACKETS
C-BC31
Camera
Image Device
Number of Effective Pixels
Scanning System
Scanning Frequency
Synchronizing System
Minimum Required
Illumination
Automatic Electric
Shutter Range
Dynamic Range
Backlight Compensation
Shutter Speed
AGC
Sensitivity Up
White Balance Mode
Lens Mount
Auto-iris Lens Output
Character Display
Other Functions
*0dB = 1V
24 V AC, 50/60 Hz or 24 V DC or PoE (IEEE802.3af)
13 W (at 24 V AC), (8 W:PoE, 350 mA; 24 V DC)
Screwless connector (Solid cable: ø0.4 – ø1.2 mm (AWG 26 – 16),
Stranded cable: 0.3 – 1.25 mm2 (AWG 22-16))
VBS 1.0 (p-p), 75Ω, RCA pin jack, NTSC
0mnidirectional, electret condenser microphone
1 channel, -10 dB*, low impedance, unbalanced, RCA pin jack
2 channels (Color/B&W Switching Input included), no-voltage contact input, open voltage: 9 V DC,
short-circuit current: Under 10 mA, loop resistance: Under 200Ω, screwless connector
2 channels, open collector output, withstand voltage: 30 V DC,
control current: 50 mA, screwless connector
Varifocal Auto Iris Lenses
CT-10VFGA
CT-2ZMGA
Varifocal Auto Iris Lenses
with Day/Night function
CT-R5VFG
CT-R3VFG
Auto Iris Lenses
CT-0312GA
CT-0412GA
CT-0812GA
Motorized Zoom Lenses
CT-6ZMG
CT-10ZMGA
CT-21ZMG
N-CC2564
Network Combination Dome Camera
SPECIFICATIONS
Power Source
Power Consumption
Video Output
Audio Input
Audio Output
Alarm Input
Auxillary Contact Output
*0dB = 1V
24 V AC, 50/60 Hz
20 W (normal operation), 25 W max. (1.6 A max.)
VBS 1.0V (p-p), 75Ω, BNC-R jack, NTSC
1 channel, -10 dB*, 10kΩ, unbalanced, RCA pin jack
1 channel, -10 dB*, low impedance, unbalanced, RCA pin jack
8 channels, no-voltage make contact input, open voltage: 9 V DC,
short-circuit current: Under 10 mA (settable alarm action)
3 channels: Open collector output, withstand voltage: 30 V DC, permissible current: Under 50 mA
1 channel: Relay contact output, permissible voltage: 30 V DC, permissible current: Under 1 A
Camera
Image Device
Resolution
S/N ratio
Synchronization
Alarm input (9 P)
Audio output (white)
Audio input (red)
BNC–R jack
LAN cable
234(9.21˝)
60
(2.36˝)
Unit: mm
ø118(ø4.65˝)
ø168(ø6.61˝)
C–BC511C (option)
or C–BC511C–S (option)
FEATURES
(Camera rear)
C–BC511C (option)
or C–BC511C–S (option)
Camera
center
5* ˝ )
R2 0.98
(R
• 255 preset positions + Home position
• 276X zoom (optical 23X, electronic 12X)
• 360° continuous pan rotation range
• Tilt rotation range +5° to -185° (using Auto-Flip function)
• High-speed pan/tilt rotating speed of up to 360°/sec.
• Rotating speed can be varied to match lens zooming ratio in
manual operation mode.
• 1/4 type CCD image device
• 480 lines high resolution
• Wide dynamic range function
• Auto focus (three modes)
• High-sensitivity function (color and B/W modes)
• Motion detection function
• Privacy masking function (up to 8 locations)
• Restricting camera movement
• Auto-pan function
• Programmable camera operation initiated by alarm input.
• Bi-directional audio transmission (line input / line output)
60(2.36˝)
Anchor bolt
(female screw)
Mounting Distance
60(2.36˝)
Camera
center
45
(1.77˝)
122(4.8˝)
Power cord length approx: 1.6 m
(Power cord length approx: 6.3˝)
4–ø4.5
(4–ø0.177˝) Auxiliary contact (cable end: 2 P loose end)
output (7 P)
122
(4.8˝)
APPEARANCE AND DIMENSIONAL DIAGRAM
122
(4.8˝)
with optional
Ceiling Mount Cover
C-BC511C
1/4 type CCD
Horizontal: 480 lines (at center)
50 dB
Internal synchronization/Power synchronization
(phase adjustable when in power synchronization mode)
Minimum Required
High-sensitivity function OFF: 3 lx (50 IRE), 1 lx (20 IRE)
Illumination
High-sensitivity function ON: 0.03 lx (50 IRE), 0.01 lx (20 IRE)
Backlight Compensation WIDE DYNAMIC/Pattern 1/Pattern 2/Pattern 3/OFF
Dynamic Range
46 dB (backlight compensation: WIDE DYNAMIC operation)
High-Sensitivity Function B/W mode and slow shutter mode (32 times max.)
White Balance
ATW/AWB
Flicker Reduction
Automatic correction
ID
8 characters (alphanumeric and symbols)
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX
No. of Preset Positions
255 Positions + Home
Automatic Operation
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60 s)), Tour (16 preset patterns)
Timer
Refresh: Starts at the preset time every day or every week by timer settings
Program: Settable 16 actions
Other Functions
Auto Flip, Freeze preset, Manual limit, Privacy masking (up to 8),
Motion detection (each 8 presets at each 4 positions)
Lens
Zooming
23X
Electronic Zooming
12x zooming
Auto-Focus
One push/stop AF/continuous
Effective Focal Length
f = 3.6 – 82.8 mm (23X)
Effective Angle of View
Horizontal: 54° (W) – 2.5° (T), Vertical: 41.6° (W) – 1.9° (T)
Maximum Aperture
F 1.6 (W) – F 3.7 (T)
Zoom Speed
WIDE end to TELE end
Approx. 1.5 sec. (preset operation), Approx. 2.9 sec. (manual operation)
Pan/Tilt Head
Rotating Range
Panning: Endless 360° rotation, Tilting: +5° to –185°
Rotating Speed
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Network
Network I/F
10 BASE-T/100 BASE-TX, Auto-Nego/Manual: RJ45 connector
Network Protocol
TCP, UDP, SIP, RIP, IGMP, HTTP, ARP, DHCP, DNS, SNTP, FTP, SMTP
Video Compression/
MPEG-4, D1 (720 x 480), Half D1 (720 x 240), QVGA (320 X 240)
Resolution
JPEG: D1 (720 X 480), Half D1 (720 x 240), VGA (640 X 480),
QVGA (320 X 240), QQVGA (160 x 120)
Frame Rate
MPEG-4 (D1, max. 30 fps) + JPEG (D1, max. 5 fps)
Audio Compression/
Sub-band ADPCM, PCM (non-compression)
Decompression
Audio Sampling Frequency 8 kHz, 32 kHz
Image Transfer Rate
MPEG-4: 4 Mbps max
Simultaneous Connected 5 (MPEG-4: 4, JPEG: 1),
Number
When streaming mode is set: No limit (MPEG-4 only)
Operating Temperature
-10°C to 50°C (+14°F to +122°F)
(Continuously active for operation at temperature below 0°C (+32°F))
Operating Humidity
Under 90% RH (no condensation)
Application
Indoor use
Finish
Base: PC/ABS resin, cool gray, Camera: PC/ABS resin, black
Dimensions
ø168 (ø6.61”) x234 (9.21”) (H) mm
Weight
2 kg (4.4 lb)
Accessories
Camera mounting screw × 4, Safety wire × 1, Category5 shielded coupler (female to female) × 1,
Extension connector (Alarm input, AUX contact output) × 1 each,
CD-ROM (Software decoder: N-SD2000, manual (PDF)) × 1
Options
Ceiling mounting cover: C-BC511C, C-BC511C-S
Flush ceiling mounting bracket: C-BC511U, C-BC511U-S
Ceiling suspension bracket: C-BC511P, Wall mounting bracket: C-BC511W
Ceiling mounting bracket: C-BC511A
ø100–110
(ø3.94˝–4.33˝)
(Camera front)
Dimension for Fixing Hole
N-VT2010
N-VR2010
Network Video Transmitter
Network Video Receiver
APPEARANCE AND DIMENSIONAL DIAGRAM
APPEARANCE AND DIMENSIONAL DIAGRAM
140.5(5.53˝)
139.7(5.5˝)
139.7(5.5˝)
127.9(5.04˝)
140.5(5.53˝)
127.9(5.04˝)
136(5.35˝)
44(1.73˝)
44(1.73˝)
136(5.35˝)
Unit: mm
FEATURES
• Connecting for analog camera to digitally transmit images
to a network.
• Bidirectional audio transmission
(Audio input × 1, Audio output × 1)
• 24V AC or 24V DC operation is possible. Moreover, PoE
capability simplifies connectivity requiring just a single
LAN cable.
• RS-232C × 1; RS-485 × 1 for remote control of combination
dome camera.
• Power supply for CV series camera (12V DC)
SPECIFICATIONS
Power Source
Power Consumption
Power Terminal
Power Output
Video Input
Audio Input
Audio Output
Audio Frequency
Contact Input
Contact Output
Serial Port
Network
Network I/F
Network Protocol
Video Compression/
Resolution
Frame Rate
Audio Compression/
Decompression
Audio Sampling Frequency
Image Transfer Rate
Simultaneous Connected
Number
Other Function
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Accessories
*0dB = 1V
24 V AC, 50/60 Hz or 24 V DC or PoE (IEEE802.3af)
10 W: at 24 V AC (9 W: PoE, 400 mA: 24 V DC)
Screwless connector (Solid cable: ø 0.4 – ø 1.2 mm (AWG 26–16)
Stranded cable: 0.3 – 1.25 mm2 (AWG 22–16))
12 V DC, max. 0.2 A, screwless connector
1 channel, VBS 1.0 V(p–p), 75 Ω, BNC jack, NTSC
1 channel, unbalanced, LINE/MIC changeable
LINE: –10 dB*, 10 kΩ, RCA pin jack
MIC: –60 dB*, 2.2 kΩ, mini–jack, volume adjustable
Phantom power supply (9 V, can be set with switch)
1 channel, –10 dB*, low impedance, unbalanced, RCA pin jack
Response 50 to 14,000 Hz (when the sampling frequency is 32 kHz)
2 channel, no–voltage contact input, open voltage: 3 V DC,
short–circuit current: Under 10 mA, loop resistance: Under 200 Ω,
screwless connector
2 channel, open collector output, withstand voltage: 30 V DC,
control current: 50 mA, screwless connector
RS–232C: D–sub connector (9 pins, male), RS–485: screwless connector
10 BASE-T/100 BASE-TX, Auto-Nego/Manual: RJ45 connecter
TCP, UDP, SIP, RTP, IGMP, HTTP, ARP, DHCP, DNS, SNTP, FTP, SMTP
MPEG-4, D1 (720 × 480), Half D1 (720 × 240), QVGA (320 × 240)
JPEG: D1 (720 × 480), Half D1 (720 × 240), VGA (640 × 480),
QVGA (320 × 240), QQVGA (160 × 120)
MPEG-4 (D1, max. 30 fps) + JPEG (D1, max. 5 fps)
Sub-band ADPCM, PCM (non-compression)
8 kHz, 32 kHz
MPEG-4: max. 4 Mbps
5 (MPEG-4: 4, JPEG: 1), In streaming mode: No limit (MPEG-4 only)
Password authentication, Motion detection function
0°C to 50°C (32°F to +122°F)
(Continuously active for operation at temperature below 0°C (+32°F))
Under 90% RH (no condensation)
Case: Surface-treated steel plate, silver, paint
136 (W) x 44 (H) x 127.9 (D) mm (5.35” x 1.73” x 5.04”)
700 g (1.54 lb)
CD-ROM (Software decoder: N-SD2000, Manuals (PDF)) × 1, Power conversion cable × 1
Unit: mm
FEATURES
• Allows displaying digital image data from a network camera
or network video transmitter on an analog monitor screen.
• Bidirectional audio transmission
(Audio input × 1, Audio output × 1)
• 24V AC or 24V DC operation is possible. Moreover, PoE
capability simplifies connectivity requiring just a single
LAN cable.
• RS-232C x 1; RS-485 x 1 for remote controller
• Power supply (12V DC)
SPECIFICATIONS
Power Source
Power Consumption
Power Terminal
24 V AC, 50/60 Hz or 24 V DC or PoE (IEEE802.3af)
10 W: at 24 V AC (9 W: PoE, 400 mA: 24 V DC)
Screwless connector (Solid cable: ø 0.4 – ø 1.2 mm (AWG 26–16)
Stranded cable: 0.3 – 1.25 mm2 (AWG 22–16))
Power Output
12 V DC, max. 0.2 A, screwless connector
Video Output
1 channel, VBS 1.0 V(p–p), 75 Ω, BNC jack, NTSC
Audio Input
1 channel, unbalanced, LINE/MIC changeable, volume adjustable
LINE: –10 dB*, 10 kΩ, RCA pin jack
MIC: –60 dB*, 2.2 kΩ, mini–jack, volume adjustable
Phantom power supply (9 V, can be set with switch)
Audio Output
1 channel, –10 dB*, low impedance, unbalanced, RCA pin jack
Audio Frequency Response 50 to 14,000 Hz (when the sampling frequency is 32 kHz)
Contact Input
2 channel, no–voltage contact input, open voltage: 3 V DC,
short–circuit current: Under 10 mA, loop resistance: Under 200 Ω,
screwless connector
Contact Output
2 channel, open collector output, withstand voltage: 30 V DC,
control current: 50 mA, screwless connector
Serial Port
RS–232C: D–sub connector (9 pins, male), RS–485: screwless connector
Network
Network I/F
10 BASE-T/100 BASE-TX, Auto-Nego/Manual: RJ45 connecter
Network Protocol
TCP, UDP, SIP, RTP, IGMP, HTTP, ARP, DHCP,DNS,SNTP
Video Compression/
MPEG-4, D1 (720 × 480), Half D1 (720 × 240), QVGA (320 × 240)
Resolution
Frame Rate
MPEG-4: D1, max. 30 fps
Audio Compression/
Sub-band ADPCM, PCM (non-compression)
Decompression
Audio Sampling Frequency 8 kHz, 32 kHz
Image Transfer Rate
MPEG-4: max 4 Mbps
Other Function
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Accessory
Password authentication
0°C to 50°C (32°F to +122°F)
Under 90% RH (no condensation)
Case: Surface-treated steel plate, silver, paint
136 (W) x 44 (H) x 127.9 (D) mm (5.35” x 1.73” x 5.04”)
700 g (1.54 lb )
Power conversion cable × 1
*0dB = 1V
N-SD2000
Software Decoder
FUNCTIONS
• Allows monitoring of MPEG-4 images from four
surveillance cameras at a time.
• Can handle images from up to 2,000 surveillance cameras
(Display only four images at a time).
• Point-view/Zoom-view Functions
While monitoring live images from the combination dome
camera, clicking on any point with the mouse moves that point
to the center of the screen. (Point-view)
An area selected by dragging the mouse is zoomed up for
display. (Zoom-view)
• Bidirectional Audio Transmission
Enables pick-up of sound from the surveillance area, as well
as issuing a voice warning to an intruder.
• Remote Control
Network Color Cameras, Network Combination Dome
Cameras, Digital Video Recorders and Combination Dome
Cameras can be remotely controlled.
• Display of images recorded on the N-DR2000 and easy
search for images users want to view
• Motion Detection Function can be easily set and checked.
• Data recorded on the Network Video Recorder can be
exported onto a PC.
N-SD0160
Software Decoder
• Sixteen images from Network Color Camera, Network
Combination Dome Camera and Network Video Transmitter
can be monitored simultaneously.
• Can handle images from up to 100 surveillance cameras
(Display only 16 images at a time).
• Recording onto the PC hard disk
Up to 5 minutes of the displaying network camera can be
manually recorded onto the hard disk of the PC, as well as up
to 30 minutes of recording that starts automatically when an
alarm signal is detected.
• Remote Control
Network Combination Dome Camera can be remotely
controlled.
SPECIFICATIONS
Required Personal Computer PC/AT compatible
Requirements
CPU: Pentium 4, over 3 GHz
Memory: Over 512 MB
Display adapter: XGA (1024 x 768 pixels), Recommended: Intel Chipset
Usable on DirectX 9.0a or later
Sound controller: Usable over DirectX 9.0a later
Network adapter: Over 100 BASE-TX
Required OS
Windows XP Professional
Media
CD-ROM
Function
Establishment of connections to TOA network color camera, network combination dome
camera and network video transmitter
Connection of live image: Manual, start up, simultaneousness with 4ch (group),
sequence, streaming
Connection of audio: Live, bi-directional, PTT, simultaneousness with 4ch
Establishment of connection to TOA network digital video recorder
Playback, search and export of recorded data (images only)
Screen display
Full screen, selection of 1 segment or 4 segment split screen
Network device control
Display of input/output contact state
Control of output contact
Control of TOA digital video recorder, multiplexer and combination dome camera
(Models to be controlled directly are limited.)
Serial bridge
Point view (for TOA network combination dome camera)
Menu control of network color camera
Other functions
Automatic detection, restart, setting change, flash LED, operation state
warning, registration/deletion of network device, parameter setting,
connection and disconnection from network video receiver to network color camera,
network combination camera and network video transmitter,
motion detection setting, snapshot, digital zoom, stillness display, system log,
firmware upload, configuration file upload/download
*Pentium is a trademark of Intel Corporation.
*Windows is a trademark of Microsoft Corporation.
*Note
The software decoder may malfunction or have its performance downgraded if other application software is running
togeter.
Two or more software decoders cannot be started with one PC.
When using the decoder under multi-display environment, take care the following.
Specify only a single display for running this software program. Traveling between displays during operation may
cause equipment malfunction.
Use the digital zoom function while the image is stopped temporarily. Dailure to do so could cause equipment
malfunction.
*Notes on MPEG-4 patent license
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR
(i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD
("MPEG-4 VIDEO") AND/OR
(ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND /OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG
LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL
USES AND LICENSING MAY BE OBTAINED FROM MPEG LA,LLC. SEE HTTP:WWW.MPEGLA.COM
N-DR2000
Network Video Recorder
SPECIFICATIONS
APPEARANCE AND DIMENSIONAL DIAGRAM
320.5(12.62˝)
Power Source
Power Consumption
Recording Storage
Network
Network I/F
Network Protocol
Frame Rate
Recording Method
Number of Simultaneous
Recording
Recording Mode
Image Quality
Resolution
110-120 V AC, 50/60 Hz
57 W (0,8 A)
HDD S-ATA 640 GB (320 GB X 2)
Other Function
Altitude
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Accessories
Option
Alert notification via e-mail, time synchronization, operating log
Under 3000 m (Under 10000 ft) (relative to sea level)
0°C to +40°C (32°F to 104°F)
20% to 80% RH (no condensation)
Case: Pre-coated steel plate. black
420 (W) × 88.7 (H) × 320.5 (D) mm (16.54" x 3.49" x 12.62")
6.1 kg (13.45 lb)
Power cord (2 m (6.56 ft)) × 1, CD-ROM(update disk) × 1
Rack mounting bracket: MB-23B
100 BASE-TX/1000 BASE-T, Auto-Negotiation: RJ45 connecter
TCP, UDP, SIP, RTP, HTTP, SMTP, ARP, DNS, NTP
Settable 1, 2, 3, 5 fps (per Network Camera and Network Video transmitter)
Video: JPEG Audio: sub-band ADPCM, PCM (non-compression)
Up to 16 stations (Network camera or Network video transmitter)
Normal, Scheduled, Alarm, Pre-alarm
5 level adjustment
D1 (720 X 480), Half D1 (720 X 240), QVGA (320 X 240)
88.7
(3.49˝)
94.1
(3.7˝)
420(16.54˝)
Unit: mm
FEATURES
• Allows images (and audio) from network cameras/video
transmitters, as well as event data, to be recorded,
distributed, and stored over a network.
• The recorder can have its settings adjusted over the network
using a PC equipped with standard Web browser software
(such as Internet Explorer).
• An NTP server function can be used to synchronize the time
throughout the system automatically.
• If the recorder malfunctions, an email notification can be sent
to a pre-set email address to make the administrator aware
of the problem.
RECORDING TIME TABLE
Audio recording: None
Image size
D1
D1
D1
Half-D1
Half-D1
Half-D1
QVGA
QVGA
QVGA
Picture
quality
1
3
5
1
3
5
1
3
5
Recording rate per camera (fps), Recording time (hour)
1
2
3
5
129
64
43
25
186
93
62
37
337
168
112
67
192
96
64
38
276
138
92
55
493
246
164
98
364
182
121
72
521
260
173
104
958
479
319
191
Audio recording: 32 k Compression: ON
Image size
D1
D1
D1
Half-D1
Half-D1
Half-D1
QVGA
QVGA
QVGA
Picture
quality
1
3
5
1
3
5
1
3
5
Recording rate per camera (fps), Recording time (hour)
1
2
3
5
104
57
39
24
138
79
55
34
208
128
93
60
142
81
57
36
183
110
78
50
258
169
126
83
218
136
99
64
266
176
131
87
346
254
201
141
Depending on recording conditions, actual available recording times may be shorter than those listed in this chart.
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
GENERAL REQUIREMENTS
The specified network camera system transmits video, audio
and control signals via a network. It allows simultaneous
transmission (MPEG-4 format) and recording (JPEG format) of
video images. Audio signals can be compressed (sub-band
ADPCM) or decompressed (PCM) and transmitted
bidirectionally. Images with audio can also be transmitted and
monitored. The system supports PoE operation, which transmits
power along with data over the same cable, reducing the
number of cables required. The system also features high
resistance to inherent network problems, allowing it to function
as a reliable surveillance system. The system consists of the
network cameras, a network video transmitter, a network video
receiver, and a network digital video recorder. Images with
audio can be monitored on a local computer by installing the
software decoder in the PC.
NETWORK COLOR CAMERA SPECIFICATIONS
The specified camera shall be a network color camera capable
of direct connection to a LAN. The camera shall be a highperformance, indoor-use camera employing a 1/3 inch IT CCD
as an image sensing device. The camera shall be capable of
mounting a CS lens and shall be equipped with wide dynamic
range and day & night functions. The camera shall support PoE
operation and shall facilitate connections using a single LAN
cable. It shall operate on 24V AC, 24V DC or PoE, and the
power consumption shall be 13W at 24V DC, 350mA at 24V DC
and 8W at PoE. The built-in microphone and audio output
terminal shall allow bidirectional audio transmission. The
camera shall be equipped with an RCA pin jack monitor output
for connecting an analog video monitor display, as well as 2
contact inputs and 2 contact outputs. The following functions
shall be made available: backlight compensation, auto gain
control, motion detection, and sensitivity up functions. Shutter
speed shall be able to be set to 1/60, 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000,1/4000 or 1/10000 and the dynamic
range shall be 46 dB. The number of effective pixels shall be
380,000. The scanning system shall be 2:1 interlaced scanning,
and the scanning frequency shall be 15.734kHz (horizontal)
and 59.94 Hz (vertical). The minimum required illumination shall
be 0.5lx (50 IRE) and 0.1lx (20 IRE) when in color mode with the
sensitivity up function set to OFF, and shall be 0.01lx when in
black & white mode with the sensitivity up function set to ON.
Both the sub-band ADPCM and PCM systems shall be used for
audio data compression and decompression, and the sampling
frequency shall be 8kHz and 32kHz. The image transfer rate
shall be a maximum of 4 Mbps in MPEG-4 format, and up to 5
images (MPEG-4: 4 and JPEG:1) shall be capable of being
simultaneously connected when in streaming mode. The frame
rate shall be a maximum of 25 frames (D1, MPEG-4) and 5
frames (D1, JPEG). Operation shall require password
authentication. The operating temperature range shall be
between -10°C and +50°C (+14°F and 122°F), operating
humidity shall be less than 90% and weight shall be 670g (1.63
lb). Dimensions shall be 69.3 (W) × 64.8 (H) × 157.3 (D) mm
(2.73" × 2.55" × 6.19"). Other functions available to the color
camera shall include privacy masking, electronic zoom,
horizontal and vertical reverse, and flicker reduction functions.
The specified camera shall be a TOA N-CC2360 or approved
equivalent.
NETWORK COMBINATION CAMERA SPECIFICATIONS
The specified camera shall be a combination dome camera
capable of direct connection to a LAN. The camera shall be an
indoor-use camera with 480 horizontal lines of resolution and
shall employ an image sensing device of 1/4 inch CCD. A
maximum of 255 preset positions shall be able to be set, and
these preset positions shall be capable of being timercontrolled, frozen or displayed in sequential order. Power
supply shall be 24V AC and power consumption shall be a
maximum of 25W. The pan rotation range shall be a continuous
360° (may be set for auto pan), and the tilt rotation range shall
be between +5° and -185°. The rotating speed shall be
capable of being varied to match the lens ratio in manual
operation mode. Programmable camera operation shall be
initiated when an alarm signal is received, and bidirectional
audio transmission shall be made possible. Other functions
shall include wide dynamic range, auto focus, high sensitivity,
motion detection, privacy masking and backlight compensation
functions. The specified camera shall be equipped with 1 video
output, 1 audio input and 1 audio output, 8 alarm make contact
inputs and 4 AUX control outputs (3 open collector outputs and
1 relay contact output). The synchronization method shall be
either internal or a line lock system. The minimum required
illumination shall be 3lx (50 IRE) or 1lx (20 IRE) when the high
sensitivity function has been disabled, and shall be 0.03lx (50
IRE) or 0.01lx (20 IRE) when the high sensitivity function has
been enabled. The effective focal length shall be between f=3.6
and 82.8 mm (23X), the effective horizontal view angle shall be
54° (wide angle) and 2.5° (tele) and the effective vertical view
angle shall be 41.6° (wide angle) and 1.9° (tele), while the
maximum aperture shall be F1.6 (wide angle) and F3.7 (tele).
Both the sub-band ADPCM and PCM systems shall be used for
audio data compression and decompression, and the sampling
frequency shall be 8kHz and 32kHz. The image transfer rate
shall be a maximum of 4 Mbps in MPEG-4 format, and up to 5
images (MPEG-4: 4 and JPEG:1) shall be capable of being
simultaneously connected when in streaming mode. The frame
rate shall be a maximum of 25 frames (D1, MPEG-4) and 5
frames (D1, JPEG). An ID consisting of 8-digit alphanumeric
characters shall be required when operating cameras, preset
positions, auto-pan and alarm functions. Numerous covers and
brackets are available for different application requirements.
Operating temperature range shall be between -10°C and
+50°C (+14°F and 122°F), operating humidity shall be less than
90% and weight shall be 2 kg (4.4 lb). Dimensions shall be 168
mm (6.61") in diameter and 234 mm (9.21") in height.
The specified camera shall be a TOA N-CC2564 or approved
equivalent.
NETWORK VIDEO TRANSMITTER SPECIFICATIONS
The specified network video transmitter shall be connected to a
LAN and transmit analog camera’s video and audio signals over
the network. It shall support the PoE function and shall facilitate
connections using just a single LAN cable. Power supply shall
be 24V AC, 24V DC or PoE, and the power consumption shall
be 10W at 24V AC, 400mA at 24V DC and 9W at PoE. The video
transmitter shall be designed to supply the power (12V DC) to
12V DC type cameras, and allow bidirectional audio
transmission using the line/mic (changeable) input (1 channel)
and line output (1 channel). The video transmitter shall also be
equipped with 1 channel of video input, 2 contact input and 2
contact output channels, as well as 1 channel each of RS-232C
and RS-485 terminals for remotely controlling a PTZ camera. The
sampling frequencies shall be 8kHz and 32kHz. Image transfer
rate shall be a maximum of 4 Mbps in MPEG-4 format and up to
5 images (MPEG-4: 4 and JPEG:1) shall be capable of being
simultaneously connected when in streaming mode. Frame rate
shall be a maximum of 25 frames (D1, MPEG-4) and 5 frames
(D1, JPEG). Operating temperature range shall be between
0°C and +50°C (32°F and 122°F), and humidity shall be less
than 90% and weight shall be 700g (1.54 lb). Dimensions shall
be 136 (W) × 44 (H) × 127.9 (D) mm (5.35" x 1.73" x 5.04").
The network video transmitter shall be a TOA N-VT2010 or
approved equivalent.
NETWORK VIDEO RECEIVER SPECIFICATIONS
The specified network video receiver shall be capable of
displaying digital images received from a network camera or
network video transmitter on an analog monitor screen. It shall
support the PoE function and shall facilitate connections using
just a single LAN cable. Power supply shall be 24V AC, 24V DC
or PoE, and the power consumption shall be 10W at 24V AC,
400mA at 24V DC and 9W at PoE. The video receiver shall be
equipped with 1 power output for 12V DC power supply and
shall allow bidirectional audio transmission using the line/mic
(changeable) input (1 channel) and line output (1 channel). It
shall also be equipped with 1 video output and 2 channels each
of contact input and contact output, as well as 1 channel each of
RS-232C and RS-485 terminals for connecting a remote control
unit. The sampling frequency shall be 8kHz and 32kHz. Image
transfer rate shall be a maximum of 4 Mbps in MPEG-4 format
and the ADPCM system shall be employed for image
compression and depression decompression. Operating
temperature range shall be between 0°C and +50°C (32°F and
122°F) and operating humidity shall be less than 90%, while
weight shall be 700g (1.54 lb). Dimensions shall be 136 (W) × 44
(H) × 127.9 (D) mm (5.35" x 1.73" x 5.04").
The network video receiver shall be a TOA N-VR2010 or
approved equivalent.
NETWORK DIGITAL RECORDER SPECIFICATIONS
The specified network digital recorder shall be capable of
recording ongoing digital images (JPEG formats) and audio
(sub-band ADPCM and PCM), as well as simultaneously
recording data from up to 16 cameras and transmitters.
Recorded data shall be converted into a database for highspeed search and viewing, and also shall be distributed to
multiple locations. The video recorder shall be equipped with
an email function that notifies with an alert in emergency
situations, and a search function enabled by day & time, block,
alarm, and motion detection. A browser shall be used for setup
and the video recorder shall be supported by a highly reliable
Linux operating system. The power supply shall be 110 – 120V
AC and power consumption shall be 57W. The hard disk drive
shall have a storage capacity of 640GB (320GB × 2). The frame
rate shall be capable of being selected from 1, 2, 3, and 5 fps,
while time synchronization shall be achieved using the NTP
server among equipment connected to the system. The
recording method shall be JPEG for video and sub-band
ADPCM and PCM for audio, and image quality shall be
adjustable in 5 steps. There shall be Normal, Scheduled, Alarm
and Pre-alarm recording modes, and resolution shall be 720 ×
480 lines for D1 format, 720 × 240 lines and 320 x 240 lines for
QVGA format. Operating temperature range shall be between
0°C and +40°C (+32°F and +104°F), while operating humidity
range shall be between 20% and 80%. Dimensions shall be
420 (W) × 88.7 (H) × 320.5 (D) mm (16.54" x 3.49" x 12.62") and
weight shall be 6.1 kg (13.45 lb).
The network digital recorder shall be a TOA N-DR2000 or
approved equivalent.
SOFTWARE DECODER SPECIFICATION
The specified software shall run under the Microsoft Windows
operating system, allowing camera images to be monitored on
a PC without using a receiver. It shall also be capable of
monitoring MPEG-4 images from a maximum of 4 surveillance
cameras at a time, as well as of handling images from up to
2,000 surveillance cameras. The specified software shall be
equipped with a point-view function that moves a certain point
of image to the center of the screen if that point is clicked with
the mouse while monitoring live images from the PTZ camera. It
shall also have a zoom-view function that zooms up the area
selected by dragging the mouse for display. The dedicated
network color cameras, network combination dome cameras,
and digital video recorders can be remotely controlled, while
the motion detection function can be set and checked easily.
The software shall be capable of easily exporting data recorded
on the digital video recorder to a PC. It shall not only display
images recorded on the digital video recorder, but also allow
easy search for images. Images can be displayed on the full
screen, 1-segment screen or 4-segment split screen. Recorded
and liver images can be viewed simultaneously.
The software shall be a TOA N-SD2000 or approved equivalent.
SOFTWARE DECODER SPECIFICATION
The specified software shall run under the Microsoft Windows
operating system, allowing camera images to be monitored on
a PC without using a receiver. It shall also be capable of
monitoring MPEG-4 images from a maximum of 16 surveillance
cameras at a time, as well as handling images from up to 100
surveillance cameras. The dedicated network combination
dome cameras can be remotely controlled. Images can be
displayed on the full screen, 1, 4, 9 and 16-segment split
screen or in sequential order. Up to 5 minutes of the displaying
network camera can be manually recorded onto the hard disk
of the PC, as well as up to 30 minutes of recording that starts
automatically when an alarm signal is detected.
The software shall be a TOA N-SD0160 or approved equivalent.
Covers and Brackets for Network Combination Dome Cameras
C-BC511C-S
C-BC511C
Ceiling Mount Cover
(Smoked)
Ceiling Mount Cover
➔
+
+
or
C-BC511A
Ceiling Mounting Bracket
C-BC511C-S
C-BC511C
Ceiling Mount Cover
(Smoked)
Ceiling Mount Cover
➔
+
+
or
C-BC511P
Ceiling Suspension
Bracket
C-BC511C-S
C-BC511C
Ceiling Mount Cover
(Smoked)
Ceiling Mount Cover
➔
+
+
or
+
C-BC511W
Wall Mounting
Bracket
or
C-BC511U-S
C-BC511U
Flush Ceiling Mounting
Bracket (Smoked)
Flush Ceiling Mounting
Bracket
TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
Printed in Japan (0803) 833-52-397-00 u
➔
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021