Atdec | TH-32-63-UTB | Datasheet | Atdec TELEHOOK 32-63” Wall Tilt

Atdec TELEHOOK 32-63” Wall Tilt
Technical Specifications
Telehook
TM
32”-63” wall tilt
NOTE
Mounting screws and hardware
The Telehook 32-63 Wall Tilt supports LCD and Plasma Flat Panel Displays
from 32” (81cm) to 63” (160cm)
Maximum load = 91kg (200lbs)
This product suits displays with mounting hole patterns from 180mm to 740mm
wide (7”-29”) by 100mm to 500mm high (4”-20”).
Mounting hardware included
a
Mounting screws included:
M8x15mm / M8x35mm / M8x45mm (x4 each)
M6x15mm / M6x35mm / M6x45mm (x4 each)
M5x15mm / M5x35mm / M5x45mm (x4 each)
M4x15mm / M4x35mm / M4x45mm (x4 each)
Mounting hardware included:
Coach Screw (x4)
Masonry Wall Plug (x4)
Washer (x4)
Multi Washer (x4)
Spacer Bush (x4)
Recessed Hole Bush (x4)
General Features
76mm
(3”)
180mm to 740mm
(7” to 29”)
23mm
(7/8 ”)
200mm
(8”)
100mm to 500mm
(4” to 20”)
265 209mm
(107/16”) (81/4”)
100mm
(4”)
32mm
(11/4”)
10mm
(3/8 ”)
120mm
(43/4”)
536mm
(211/8 ”)
254mm
(10”)
200mm
(8”)
8mm
(5/16”)
43mm
(111/16”)
610mm
(24”)
795mm
(311/4”)
B
55mm
(23/16”)
Range of Movement
ADJUSTABLE TILT OF
-5° TO 15°
-5°
15°
560mm (22”) OF HORIZONTAL ADJUSTMENT
FROM 180mm (7”) TO 740mm (29”)
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 08.10.07 ©
21mm
(13/16”)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising