RUT850 Quick Start Guide

RUT850 Quick Start Guide
Login to device
1. To enter router's Web interface type http://192.168.1.1 in your internet browser.
2. Use the following parameters when prompted for authentication:
User name: admin
Password: admin01
3. Configuration Wizard will start after logging in. It is necessary to complete Configuration Wizard to
setup router to correct mode. You can leave default settings but it is strongly recommended that you change
the password and enable Wireless Security.
RUT850 Automotive Router
Quick start guide v2
4. Go to Status > Network Information and pay attention to Signal Strength. To maximize the
performance try adjusting antennas or changing location of your device to achieve best signal conditions.
This sign on the package means that it
is necessary to read the User's
Manual before you start using the
device.
ISO 9001
This sign on the package means that all
used electronic and electric equipment
should not be mixed with general
household waste.
Hereby, Teltonika declares that this RUT850 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Please visit our web site www.teltonika.lt for more information
4
LTE is a trade mark of ETSI.
CERTIFIED
ORGANISATION
5
6
7
Configure your computer (using Windows 7)
Front view
1
1 Power LED
5 2G LED
2
2 SIM holder
6 3G LED
3
3 Reset buttons
7 4G LED
4
8
4 WiFi LED
8 GSM signal strength indication LEDs
Back view
1
1 Power socket
2 LTE main antenna connector
2
1
Enable the wireless network connection
(go to Start > Control Panel > Network
and Internet > Network and Sharing
Center. In the left panel click Change
adapter settings link. Right click on
Wireless Network Connection and
select Enable).
3
3 LTE aux antenna connector
Power socket pinout
No.
Description
1
Not connected
White
2
Ignition
Green
3
Ground
Black
4
Power
Red
Wire color
1
2
3
4
Hardware installation
1. Pull out SIM holder by pushing the button and insert SIM cards which was given by your ISP (Internet
Service Provider). Correct SIM card’s orientation is shown in the picture.
3. Insert
the SIM
2
3
4
Right click on Wireless Network
Connection and select
Connect/Disconnect to see
available wireless networks.
Setup wireless network adapter on your
computer ( r ight click on Wireless
Network Connection and select
Properties. After that select Internet
Protocol Version 4 (TCP/IP) and click
Properties).
5
4. Push in
the SIM holder
Select Obtain IP address
automatically and Obtain DNS
server address automatically if
they are not selected. Click OK.
Choose the wireless network rut850
from the list and click Connect.
2. Pull out
the SIM holder
1. Push
the button
2. Attach LTE antennas.
3. Connect the power adapter to the socket on the back of the device. Then plug the other end of the power
adapter in to the power socket (or by your option).
4. Connect to the device wirelessly (SSID: rut850).
2
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement