Tripp Lite | SMART2600RM2U | Datasheet | Tripp Lite SmartPro 120V 2.6kVA 1.92kW Line-Interactive Sine Wave UPS, Extended Run, SNMP, Webcard, 2U Rack/Tower, USB, DB9 Serial

Tripp Lite SmartPro 120V 2.6kVA 1.92kW Line-Interactive Sine Wave UPS, Extended Run, SNMP, Webcard, 2U Rack/Tower, USB, DB9 Serial
SmartPro 120V 2.6kVA 1.92kW Line-Interactive Sine
Wave UPS, Extended Run, SNMP, Webcard, 2U
Rack/Tower, USB, DB9 Serial
Highlights
2.6kVA / 2600VA / 1920W line
interactive 2U rack/tower UPS,
Sine Wave output
120V output, Corrects brownouts
MODEL NUMBER: SMART2600RM2U
and overvoltages from 83V to
145V
Interactive LCD interface, 4 post
compatible mounting accessories
96% line-mode efficiency, 2
switched load banks
USB, RS232, EPO and slot for
SNMPWEBCARD option
120V NEMA 5-20P input, 4
NEMA 5-15R, 4 NEMA 5-15/20R
& 1 L5-20R outlets
Applications
Distributed Server Rooms
Network Closets
Description
Small Business Networks
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
Voice over IP (VoIP) Phone
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)
Systems
with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
Package Includes
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
SMART2600RM2U UPS system
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
PowerAlert software with USB,
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover
Serial & EPO cabling
from line to battery power occurs within milliseconds to maintain operation of connected equipment without
4 post installation kit
interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network
Owner's manual
management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network
interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network
communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software
and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off
(EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel
and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART2600RM2U line interactive 2U rack/tower UPS with 2600VA / 2.6kVA / 1920W capacity and extended runtime options
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA 5-20P input plug; 4 NEMA 5-15/20R, 4 5-15R and 1 L5-20R output receptacles, Two independently switched output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 12.9 minutes at 50% load (960W) and 4.6 minutes at 100% load (1920W)
Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible)
1/6
External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens
of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND
enables tower placement
Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable
Specifications
SELECTOR
Selector Type
UPS SYSTEMS
General Info
Product Group
UPS SYSTEMS
TAA Compliant
No
OVERVIEW
UPS Family
SmartPro Network
UPS Type
Line-Interactive
OUTPUT
Output Volt Amp Capacity (VA)
2600
Output kVA Capacity (kVA)
2.6
Output Watt Capacity (Watts)
1920
Output kW Capacity (kW)
1.92
Nominal Output Voltage(s)
Supported
120V
Frequency Compatibility
60 Hz
Output Voltage Regulation (Line
Mode)
-14%, +6%
Output Voltage Regulation (Battery
Mode)
+/- 5%
Output Receptacles
(4) 5-15R; (4) 5-15/20R; (1) L5-20R
Load Management Receptacles
Two switchable single-outlet 5-15R load banks
Output Circuit Breakers
15A breaker protects 5-15R, 20A breaker protects 5-15/20R, L5-20R is unbreakered
2/6
Output AC Waveform (AC Mode)
Sine wave
Output AC Waveform (Battery Mode)
Pure Sine wave
INPUT
Rated input current (Maximum Load)
16A
Nominal Input Voltage(s) Supported
120V AC
UPS Input Connection Type
5-20P
UPS Input Cord Length (ft.)
10
UPS Input Cord Length (m)
3
Recommended Electrical Service
20A 120V
Input Phase
Single-Phase
BATTERY
Full Load Runtime (min.)
4.6 min. (1920w)
Half Load Runtime (min.)
12.9 min. (960w)
Expandable Battery Runtime
Extended runtime supported via optional external battery packs
External Battery Pack Compatibility
BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)
DC System Voltage (VDC)
48
Battery Recharge Rate (Included
Batteries)
Less than 4.5 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery
Cartridge
RBC94-2U
Battery Access
Front panel battery access door
Battery Replacement Description
Hot-swappable, user replaceable batteries
Expandable Runtime
Yes
VOLTAGE REGULATION
Voltage Regulation Description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction
Input voltages between 127 and 147 are reduced by 12%
Undervoltage Correction
Input voltages between 95 and 104 are boosted by 12%
Severe Undervoltage Correction
Input voltages between 83 and 94 are boosted by 24%
LEDS ALARMS & SWITCHES
Front Panel LCD Display
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating
data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual
for detailed LCD configuration and monitoring options)
Audible Alarm
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Alarm Cancel Operation
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option
available
3/6
Switches
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Front Panel LCD
Yes
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating
570
UPS AC Suppression Response
Time
Instantaneous
EMI / RFI AC Noise Suppression
Yes
PHYSICAL
Included Mounting Accessory
Description
4 post rackmount installation accessories included
Installation Form Factors Supported
with Optional Accessories
2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
Primary Form Factor
Rackmount
UPS Power Module Dimensions
(hwd, in.)
3.46 x 17.32 x 19.46
UPS Power Module Dimensions
(hwd, cm)
8.8 x 44 x 41.8
Rack Height (U Spaces)
2
UPS Power Module Weight (lbs.)
64
UPS Power Module Weight (kg)
29.1
UPS Shipping Dimensions (hwd / in.)
7.8 x 21.7 x 24.2
UPS Shipping Dimensions (hwd /
cm)
19.8 x 55.1 x 61.5
Shipping Weight (lbs.)
72
Shipping Weight (kg)
32.7
Cooling Method
Fan
UPS Housing Material
Steel
ENVIRONMENTAL
Operating Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)
250
AC Mode Efficiency Rating (100%
Load)
96%
COMMUNICATIONS
Communications Interface
USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
4/6
Network Monitoring Port Description
Supports detailed monitoring of UPS and site power conditions
PowerAlert Software
Included
Communications Cable
USB and DB9 cabling included
WatchDog Compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time
5 milliseconds (line to battery mode); 1 millisecond (battery to line mode)
Low Voltage Transfer to Battery
Power (Setpoint)
83
High Voltage Transfer to Battery
Power (Setpoint)
145
SPECIAL FEATURES
[Ad] 3kVA Hotswap Video Flag
0
[Ad] HDMI over Cat5/6 Video Flag
0
Non U.S. Only Flag
0
[Ad] KVM Demo LP Flag
0
U.S. Only Flag
0
[Ad] 8-10kVA Hotswap Video Flag
0
[Ad] 16kVA Hotswap Video Flag
0
[Ad] Charging Station Video Flag
0
Search Only Flag
0
[Ad] Console Server Demo LP Flag
0
Grounding Lug
Back panel grounding lug
Cold Start (Startup in Battery Mode
During a Power Failure)
Cold-start operation supported
High Availability UPS Features
Hot swappable batteries
Green Energy-Saving Features
Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A
(EMI); ROHS (Restriction of Hazardous Substances)
WARRANTY
Product Warranty Period (Worldwide)
2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
$250,000 Ultimate Lifetime Insurance
APPLICATIONS
5/6
UPS Applications
Network/Server; Eco Energy-Saving
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
6/6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising