Advertisement
Advertisement
Installation Guide
AMD K8 bracket can be removed from the waterblock ( Figure a ) to adjust the appropriate installation direction. ( Figure b / c )
GH-WPBC1
Accessories
1) MOSFET Air Cooling Fan
2) Waterblock
3) Intel ® Pentium
Spring Screws
4) Intel ®
®
Pentium ®
4 LGA775
4 LGA775 Back
Plate
Caution :
5) Intel ® Pentium ® 4 LGA775 Bracket
6) ADM K8 / AM2 Clip
7) AMD K8 / AM2 Bracket
8) Grease
Specifications
Step1
Fan speed
Fan Connector
Bearing
Noise
Intel ® Pentium ® Extreme Edition Series
Intel
Intel
® Pentium
® Pentium
®
®
D Processor Series
4 Processor Series ( LGA775 )
Intel ® Core TM 2 Duo Processor Series
AMD AM2 Series
AMD Athlon TM
AMD Athlon TM
FX Series
64x2 Series
AMD Athlon TM 64 Series
1. Before pouring liquid coolant into the tank to test the liquid cooling system, please reconfirm all the tubes have been fastened and the tube clips are in the right position.
2. While removing the tubes for disassembly, please make sure to keep all the devices away from any electronic part.
Mosfet cooling Fan
Compatible CPU
Fan size 80 x 80 x 25 mm
2000 RPM
3 pin
EBR
19 dBA
The following are not covered by the warranty:
1. Use the product incorrectly or in a manner other than the designed purpose.
2. Nonobservance of the proper operation provided. (e.g. overclocking)
3. Malfunction due to interference from other devices.
4. Unauthorized modification of the product.
5. Consequential damage to other objects due to the product’s fault.
6. Malfunction arising from casualties (earthquake, thunder, fire, and flood).
7. The product’s warranty label has been removed or damaged.
8. The devices inside, including power supply, hard disk, CD-
ROM drive, motherboard, ventilator, etc, are not detached from the chassis prior to the transportation of the computer product, resulting in damage to the chassis or computer-related devices.
9. Any loss caused by failure to follow the installation process contained in the user.
10. Any damage to the system arising from leakage of coolant due to improper installation.
11. Use only GIGABYTE TM Liquid Coolant. Any damage arising from the use of liquids other than GIGABYTE is not covered by the warranty.
TM Liquid Coolant
Intel
®
Pentium
®
4 LGA775 Back Plate Installation
( For AMD series CPU, please ignore this step )
Take off the double-side sticker on the Intel ® Pentium ® 4
LGA775 back plate ( as Figure a ), and stick it on the back of Intel on Intel
®
®
Pentium
Pentium the back of Intel
® 4 LGA775 CPU with aligning four holes
® 4 LGA775 back plate to four holes on
® Pentium ® 4 LAG775 CPU motherboard
(as Figure b).
( Figure a ) ( Figure b )
Step 2
Waterblock Installation
Warning :
Please make sure to take off the "CAUTION" sticker and apply the grease on the CPU surface evenly.
Step 3
H
Intel
®
Pentium
®
4 LGA775 Bracket Installation
Replace AMD K8 bracket with Intel Pentium
Place the waterblock on the top of Intel installation direction. ( Figure c )
® ® 4 LGA775 bracket. ( Figure a )
® Pentium ® 4 LGA775 CPU ( Figure b ) and adjust the appropriate
H
Secure Intel ® Pentium ® 4 LGA775 motherboard with attached spring screws.( Figure c )
( Figure a )
( Figure a )
( Figure b )
Step 4
H
AMD K8 Clip Installation
Align the waterbolck to three raised point on the
CPU and push down the bar to surely secured.
( Figure b )
( Figure c )
( Figure c )
( Figure d )
Step 5
H
AMD AM2 Clip Installation
Align the waterbolck to the raised point on the
CPU and push down the bar.
Step 6
MOSFET Air Cooling Fan Installation
6-1. Place MOSFET air cooling fan on the top of waterblock and make sure that four feet of the air cooling fan are secured on waterblock.
6-2. Plug the power cord of MOSFET air cooling fan in the socket on the motherboard's CPU fan.
Warning : Before coming to use, please confirm that tubes are secured with tube clips.
Tube clips comes with GIGABYTE TM 1/2" tube which can prevent it from leakage.

Public link updated
The public link to your chat has been updated.
Advertisement