- Industrial & lab equipment
- Electrical equipment & supplies
- Batteries & accessories
- Battery chargers
- Lenmar
- PRO541
- Data Sheet
Lenmar PRO-541 Battery Charger Datasheet
Add to my manuals1 Pages
Lenmar PRO541 is a versatile battery charger designed for quickly and efficiently charging Nickel Cadmium (NiCd) or Nickel Metal-Hydride (NiMH) batteries of various sizes, including AA, AAA, C, D, and 9V. It features separate charging modes for Ni-MH and Ni-Cd batteries, ensuring optimal charging performance for each type. The charger comes with automatic quick charge for AA, AAA, C, and D batteries, indicating the charging status with LED lights. For 9V batteries, it offers a manual overnight charge with a duration of 10-15 hours, depending on the battery capacity.
advertisement
◉
Touch to zoom
НЕЕ, NOMEMPRO Model PRO541 Rechargeable Nickel Metal-Hydride Batteries and Charger Important Safety Instructions are included. Please read the entire manual before use. Owner's Manual Thank you for purchasing the NoMEM PRO Battery System. Please read this manual carefully. It contains important operating instructions for your NOMEM PRO Rechargeable Battery System. This PRO541 charger will quickly and efficiently charge all AA, AAA, C, D and 9V size Nickel Cadmium (NiCd) or Nickel Metal-Hydride (NiMH) batteries. Warning: Charge only NiCd or NiMH batteries on this charger. * Do Not mix NiCd and NiMH batteries together when charging or using. Keep all NiMH batteries and NiCd batteries separate. * Batteries may leak or explode causing personal injury if inserted improperly, disposed of in fire, mixed with other battery types, or short circuited. CHARGING INSTRUCTIONS АА, ААА, С & D Size (Automatic Quick Charge) 1. Slide the battery type switch to the proper position for charging either “Ni-MH” for NOMEM PRO or other Nickel Metal-Hydride batteries, or to “Ni-Cd” to charge Nickel Cadmium batteries. Each battery position can only hold 1 battery at a time, do not stack 2 or more batteries in one position. Insert 1-4 batteries into the charger by pulling back the spring loaded chrome “-“ battery contact, insert the batteries to be charged observing the polarity marked inside the charger, and release the spring contact to allow it to make contact with the battery. 2. Plug the charger’s cord into any typical household outlet. The indicator LED will glow Red in each battery position where a battery is installed, showing charging is taking place. After the proper charge time, the LED's will turn off to indicate that the charge is complete and batteries are ready for use. The charger will switch to “trickle” mode to keep the batteries at full. Due to the extra high capacity of NiMH D cells (5000mAh), two charge cycles are required to charge fully from empty. 3. Remove batteries and unplug charger once charge is complete. Do not leave batteries in charger for extended periods of time OR when the charger is not plugged in. Unplug the charger when not in use. 4.Begin again at Step-1 to charge the next set of batteries. 9 Volt Size (Manual “Overnight” Charge) 1.Connect one or two 9V NiCd or NiMH type batteries to the charger and the green LED's next to them will light. 2.Depending on the capacity of the 9V battery to be charged, leave the battery on the charger for 10 — 15 hours according to the table below. The LED will stay on even after the charge time has been reached. Remove the battery which is now ready to use. Unplug the charger when not in use. CHARGING TIMES: 5 hours — NiCd 8 Hours — NiMH (D size, 5000mAh cells require two 8 hr. charge cycles, 16 hrs. total) 9V Battery — 110mAh (10 hours), 150-160mAh (15 hours) CAUTION: Do not overcharge the batteries. For indoor use only. This NoMEM PRO charger is intended for use with Nickel Metal-Hydride and Nickel Cadmium batteries only. Attempting to charge any other type of battery may cause personal injury and damage to the charger. Never charge NiMH and NiCd batteries at the same time. Warranty This NoMEM PRO charger is warranted to be free of manufacturing defects for two years from the original date of purchase. If, during the warranty period, any part fails to function properly under normal use because of manufacturing defects or workmanship, it will be repaired at no charge for parts and labor or, at our option, the product will be replaced. The following is excluded: damages from delay or loss of use of equipment, or damaged batteries, malfunctions resulting from misuse, tampering, unauthorized repairs, modifications or accident. To obtain warranty service, package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and insured to: LENMAR ENTERPRISES, INC. USA 4035 VIA PESCADOR CAMARILLO, CA 93012 When sending in product for service, your package should include evidence of date and place of purchase. Enclose $10.00 for shipping and handling for addresses in the U.S.and $15.00 in Canada. For outside the U.S. and Canada, freight will vary depending upon ship-to address. Proposition 65 Notice (California) The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers. * WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling. For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.lenmar.com or call 805/384-9600 from 9AM — 5PM PST. 306-217-V
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project