JAI Spark SP-5000 USB
2560 x 2048
62 FPS
Spark Series
SP-5000-USB
5-megapixel CMOS global shutter
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Large format 5 MP CMOS imager (global shutter)
Up to 62 fps at full resolution
5.0 μm square pixels in a 5:4 aspect ratio
Monochrome or Bayer color models
60 dB linear dynamic range with up to 100 dB piecewise HDR modes (monochrome only)
Analog front-end gain control for reduced noise in low light images
On-chip analog gain for individual R, G, + B control (color models)
Exposure control from 10 μs (1/100,000) to 8 seconds in 1 μs steps
ROI modes for flexible readout, windowing, or increasing frame rate
Vertical and horizontal binning on monochrome model
8/10-bit digital output over USB3 Vision interface
C-mount lens mount
Automatic Level Control (ALC) for dynamic lighting conditions
Programmable P-iris lens control or 3-axis control for operation of motorized lenses,
pan/tilt heads, or other analog accessories
www.jai.com
W W W. S T E M M E R- I M A G I N G . C O M
Spark Series
Specifications for SP-5000-USB
Specifications
Dimensions
SP-5000-USB
Binning
EMVA 1288 Parameters
Absolute sensitivity (mono)
Absolute sensitivity (color)
Maximum SNR (mono)
Maximum SNR (color)
Traditional SNR*
Video signal output
mono
color
>55 dB (0 dB gain)
>53 dB (0 dB gain, green)
mono
color
8/10-bit monochrome
8/10-bit raw Bayer
0.7Vp-p, with 0.3V horiz. sync
Manual/automatic 0 dB to +24 dB
Auto-iris lens video output
Gain
White balance (SP-5000C)
Gamma
Synchronization
Trigger input
Trigger modes
Manual, one-push auto, or continuous
(3000K to 9000K)
0.45-1.0 (8 steps) or 256-point LUT
Internal
Opto In, TTL In, Pulse Generators (2),
Software, NAND 0, NAND 1
EPS, PIV, Trigger Width, Timed RCT (with ALC),
Sequence
Electronic shutter
Timed exposure
Auto shutter
Auto Level Control (ALC)
10 μs to 8 sec in 1 μs steps
1/62 to 1/100000 sec.
Shutter range from 1/62 to 1/100000, gain
range from 0 dB to +24 dB, auto iris control.
Tracking speeds and max values adjustable.
High Dynamic Range function
Pre-processing functions
3-axis control
Operating temperature
Storage temperature
Humidity
Vibration
Shock
Regulations
Power
Lens mount
Dimensions (H x W x L)
Weight
4 built-in HDR slopes.
Selectable up to ~100 dB.
&LATÎjELDÎCORRECTIONÎCOLORÎSHADINGÎCORRECTIONÎ
(SP-5000C), blemish compensation
(512 pixels)
Programmable control of motorized lenses,
pan/tilt heads, and other analog accessories
-45°C to +70°C†
-45°C to +70°C
20 – 80% non-condensing
10 G (20Hz to 200Hz XYZ)
80 G
CE (EN61000-6-2, EN61000-6-3),
FCC Part 15 class B, RoHS/WEEE
12V to 24V DC ± 10%. 6.24W typical
(full frame @ 12V)
#MOUNTÎjXEDÎORÎADJUSTABLE
62 mm x 62 mm x 55.5 mm
255 g
Ordering Information
SP-5000M-USB
SP-5000C-USB
Monochrome camera with two-channel USB3 Vision
Color camera with two-channel USB3 Vision
*Traditional SNR is based on random noise in a single frame, where EMVA SNR measurements
consider more comprehensive noise sources and variance over time. For a more complete
description, see the manual.
†Reduced performance may occur when operating outside the standard range of -10°C to +50°C
Note: add -CX to model number for adjustable C-mount
Europe, Middle East & Africa
Phone +45 4457 8888
Fax +45 4491 3252
Connector pin-out
DC In / Trigger
USB 3.0 Interface
HIROSE HR10A-10R-12PB-01
Micro B type - ZX3600-B-10P or equiv.
Pin
Signal
No
I/O Name
1
2
3
4
5
6
7
8
9
10
11
12
GND
+12V to +24V DC input
GND
NC
Opto InOpto In+
Opto OutOpto Out+
TTL out 1
TTL in 1
+12V to +24V DC input
GND
1
2
I
VBUS IN
I/O DM
3
4
5
6
7
8
9
10
1
2
Spectral Response
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
400
500
600
700
Wavelength (nm)
Monochrome –
Red –
Green –
Americas
Phone (Toll-Free) 1 800 445 5444
Phone +1 408 383 0300
Visit our web site on www.jai.com
W W W. S T E M M E R- I M A G I N G . C O M . I M A G I N G I S O U R PA S S I O N
GERMANY
AU ST R I A
Phone: +49 89 80902-0
[email protected]
UNITED KINGDOM
IRELAND
Imaging is our passion.
Phone: +44 1252 780000
[email protected]
www.stemmer-imaging.com
Power (VBUS)1
USB2.0 Differential
pair (-)2
I/O DP
USB2.0 Differential
pair (+)
OTG ID
USB OTG ID for
identifying lines
GND
GND
O
FX3 SSTXM USB3.0 Signal
Transmission line (-)
O
FX3 SSTXP USB3.0 Signal
Transmission
line (+)
GND
GND
I
FX3 SSRXP USB3.0 Signal
Receiving line (-)
I
FX3 SSRXM USB3.0 Signal
Receiving line (+)
SP-5000-USB does not accept power over USB
Does not work with USB 2.0
Note: Color response includes IR-cut filter.
Asia Pacific
Phone +81 45 440 0154
Fax +81 45 440 0166
Note
FRANCE
SW I T Z E R L A N D
THE NETHERLANDS
STEMMER IMAGI NG LHead
I E C H T Office
E N ST E I N
B E LG I U M . L U X E M B O U R G
Gutenbergstraße
D-82178
Phone:
+33 1 45069560 9 - 13,Phone:
+41 55Puchheim
415 90 90
Phone: +31 575 495159
[email protected]
[email protected]
[email protected]
Phone: +49 89 80902-0, [email protected]
Blue –
800
900
1000
K-JAIO50-01/2015 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document.
Full
ROI (mono)
1” CMOS global shutter
48 MHz
62 frames/sec.
12.8 mm (h) x 10.2 mm (v), 16.39 mm diagonal
5.0 μm (h) x 5.0 μm (v)
2560 (h) x 2048 (v)
2560 (h) x 2048 (v) up to 62 fps
1 line to full frame height in 1-line steps, with
X offset and width in 16-pixel steps
2 lines to full-frame height in 2-line steps,
with X offset and width in 16-pixel steps
1x2, 2x1, 2x2 (monochrome only)
10-bit output format
23.50 p (ɉ= 525 nm)
36.08 p (ɉ = 525 nm)
41.48 dB
38.00 dB
Sensitivity (relative QE x FF)
Sensor
Pixel clock
Frame rate, full frame
Active area
Cell size
Active pixels
Read-out modes
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement