Atdec | SD-FS-H | Datasheet | Atdec SPACEDEC Freestanding Hex

Atdec SPACEDEC Freestanding Hex
Technical Specifications
SPACEDEC
DISPLAY FREESTANDING HEX
TM
Dimensions
42mm
(15/8”)
100mm (37/8”) of
TRAVEL
From 605mm
(237/8”)
to 705mm (273/4”)
74mm
(215/16”)
117mm (45/8”)
5 Holes at
125mm
(47/8”)
Intervals
843mm
(333/16”)
100mm (37/8”) of
TRAVEL
From 225mm (87/8”)
to 325mm (127/8”)
18mm
(3/4”)
142mm
(55/8”)
1308mm (511/2”)
391.50mm (153/8”)
525mm (203/4”)
391.50mm (153/8”)
ADJUSTABLE
ADJUSTABLE
Long Pin
Long Pin
ADJUSTABLE
Short Pin
888mm (35”)
356mm
(14”)
Typical Configurations
385mm (153/16”)
325mm
(127/8”)
Typical configuration for 15” Monitors
473mm (185/8”)
458mm
(18”)
Typical configuration for 21” Monitors
Donut 42 Dimensions
Maximum Load: 11.5 kgs (25 lbs)
117mm (45/8”)
Plus or
Minus 40
Rotation
from
centre
35mm
(13/8”)
102mm (4”)
Short Pin
90mm (31/2 ”)
147mm (51/4”)
Plus or
Minus 40
Rotation
from
centre
42mm
(15/8”)
Long Pin
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty
Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 15.02.08 ©
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising