advertisement
HDMI Matrix 4 x 4
With IR Matrix
User manual
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
I. Introduction
This is a high performance HDMI Matrix with four HDMI inputs & four outputs. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on the any of the four displays simultaneously, and supports 4K×2K, 3D, Deep Color. With its 3Gbps bandwidth and the additional features of the latest HDMI standards you can be sure of great HDMI distribution.
II. Features
1. Supports display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
2. 3D HDMI 1.4a video format support.
3. 3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock.
4. Supports deep color up to 48-bit per pixel.
5. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
6. Supports reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to
192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.
7. Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.
8. Operates for TMDS clock frequencies up to 300MHz.
9. Supports IR Matrix, all IR Receiver (IR/IR EXT pigtail /IR Matrix Rx pigtail) can control the matrix by using matrix remote, and IR Matrix Rx pigtail also can control the source by using source’s remote.
III. Package
HDMI Matrix --------------------------------------------------------- 1PCS
Adaptor ---------------------------------------------------------------- 1PCS
Operation Manual ---------------------------------------------------- 1PCS
Remote Controller------------------------------------------------------1PCS
RS232 Serial Cable----------------------------------------------------1PCS
Wideband IR Tx (optional) ------------------------------------------4PCS
Wideband IR Rx(optional) -------------------------------------------5PCS
BesTrans | We Transfer Data Best Audio/ Video transmission bestranstek.com
Version: V1 Page: 1
IV. Specifications
1. Frequency Bandwidth 2.97Gbps
2. Input Ports 4 x HDMI Female input ports
3. Output Ports 4 x HDMI Female output ports
4. Power Supply DC 12V, 2.5A
5. ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
6. Dimensions (mm) 115(W) X 270 (D) X 45 (H)
7. Weight (g) 900
8. Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
9. Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
10. Relative Humidity 20 ~ 90% RH (Non-condensing)
11. Power Consumption (Max) 20W
V. Operation Controls and Functions
Front Panel
1. ON/OFF: Power on/off switch.
2. POWER: This red LED illuminates when the device is connected with power supply.
3. IR IN: Remote control signal receive.
4. OUTPUT A: Press this button to select the input source to HDMI OUTPUT A, and these red LED illuminate when the output select to the corresponding input.
5. OUTPUT B: Press this button to select the input source to HDMI OUTPUT B, and these red LED illuminate when the output select to the corresponding input.
6. OUTPUT C: Press this button to select the input source to HDMI OUTPUT C, and these red LED illuminate when the output select to the corresponding input.
7. OUTPUT D: Press this button to select the input source to HDMI OUTPUT D, and these red LED illuminate when the output select to the corresponding input.
Rear Panel
1. INPUT PORTS: LED1-4 illuminate when the HDMI signal plug in INPUT 1-4 port.
INPUT 1-4 ports are where you connect the HDMI source.
2. OUTPUT PORTS: LED A-D illuminate when the TV plug in OUTPUT A-D ports.
BesTrans | We Transfer Data Best Audio/ Video transmission bestranstek.com
Version: V1 Page: 2
OUTPUT A-D ports are where you connect the HDTV or monitor with HDMI cable
3. RS232: This port can control the matrix via PC.
4. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.
5. IR EXT: This port is local IR receiver for extending the IR signal. Connect with Wideband IR Rx.
6. IR IN: These ports are IR Matrix input ports. Connect with Wideband IR Rx.
7. IR OUT: These ports are IR Matrix output ports. Connect with Wideband IR Tx.
Right Panel
1. EDID Selector: Select HDMI output signal format via EDID Selector.
13
14
15
16
9
10
11
12
6
7
4
5
8
2
3
Number
1
EDID Selector
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
VI. Application Example
Description
Auto mode(default)
1080I,Stereo Audio 2.0
1080I,Dolby/DTS 5.1
1080I,HD Audio 7.1
1080P,Stereo Audio 2.0
1080P,Dolby/DTS 5.1
1080P,HD Audio 7.1
3D,Stereo Audio 2.0
3D,Dolby/DTS 5.1
3D,HD Audio 7.1
4K2K,Stereo Audio 2.0
4K2K,Dolby/DTS 5.1
4K2K,HD Audio 7.1
1024x768 DVI
1920x1080 DVI
PC Software control mode
BesTrans | We Transfer Data Best Audio/ Video transmission bestranstek.com
Version: V1 Page: 3
VII. Remote control
OUT A: Press 1\2\3\4 button will to select input source to HDMI OUT A, and the LED will indicate the corresponding input source.
OUT B: Press 1\2\3\4 button to select input source to HDMI OUT B, and the LED will indicate the corresponding input source.
OUT C: Press 1\2\3\4 button to select input source to HDMI OUT C, and the LED will indicate the corresponding input source.
OUT D: Press 1\2\3\4 button to select input source to HDMI OUT D, and the LED will indicate the corresponding input source.
VIII. Matrix controller user guide
Installation
Matrix controller is a green software. Just copy MatrixController.exe to PC which is used to control the Matrix by RS232 COM port or TCP/IP to complete installation.
Preparation
Connect PC and Matrix by RS232 cable (headers of both sides of cable should be FEMALE) or TCP/IP(local area network)
Power-up Matrix
Double click MatirxController.exe icon to run it
How to control Matrix
“General” page
BesTrans | We Transfer Data Best Audio/ Video transmission bestranstek.com
Version: V1 Page: 4
Select RS232 COM or TCP mode
Select RS232 COM port
Click to connect or disconnect PC and Matrix
Select Matrix IP
Connet to Matrix IP
Search Matrix IP
Configure Matrix IP and MAC
Enable or disable IR /beep
Device information display area
Click to refresh device status: include device information displayed in area and Input/Output Settings on “Matrix” page
Configure TCP
After action of , edit form will pop-up as below:
Select auto or static IP
Rewrite the Matrix IP
Rewrite the Matrix MAC
“EDID control” page
BesTrans | We Transfer Data Best Audio/ Video transmission bestranstek.com
Version: V1 Page: 5
Set EDID mode for selected Input port or All Input ports, click “Set” button to complete action
Select EDID
Select Input port
Copy EDID from Output port to selected Input port or All Input ports, click “Set” button to complete action.
Select Output port
Download EDID content to selected Input port or All Input ports, click
“Download” button to complete action.
Open EDID binary file
Display EDID binary file path
“Matrix” page
LED which display Input number for respective Output
Click to select Input port for respective Output port
Click to select previous or next Input port for respective Output port
“FW upgrade” page
Click to open FW file(file extension is “.fw”)
Display the FW file path
Displaying the progress of the software upgrade
Click to upgrade the Matrix software
Display the message of the software upgrade
BesTrans | We Transfer Data Best Audio/ Video transmission bestranstek.com
Version: V1 Page: 6
Clear the message of the software upgrade
BesTrans | We Transfer Data Best Audio/ Video transmission bestranstek.com
Version: V1 Page: 7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project