Chicco Echo stroller User manual

Below you will find brief information for stroller Echo. The stroller Echo is a lightweight and compact stroller that is easy to fold and carry. It has a 5-point safety harness, a multi-position backrest, and a storage basket. The stroller Echo is also equipped with swivel wheels that make it easy to maneuver. The stroller Echo is suitable for children from birth to 36 months of age and weighs up to 15 kg.

PDF Download
Document
Chicco Echo Stroller User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Lightweight and compact
  • Easy to fold and carry
  • 5-point safety harness
  • Multi-position backrest
  • Storage basket
  • Swivel wheels

Frequently asked questions

To adjust the inclination of the backrest, press the button located on the backrest. Release the button to lock the backrest in the nearest position. To raise the backrest to the desired position, simply push it in an upward direction.

Fit the front wheel unit to the stroller and lock it into position. A “click” will be heard indicating that the front wheel unit is fitted correctly into position. Repeat this operation with the other wheel unit. Before use, ensure that the wheel units are safely locked into position.

Release the closing device and push the front part of the stroller forward. Push the rear locking mechanism downward with your foot. Ensure that the stroller is correctly locked in the open position. Before use, ensure that the stroller is locked in the open position, by checking that the locking mechanism, at the rear of the stroller, is effectively secured.

If it is open, close the hood, raising the two side calliper shaped mechanisms and pulling the front part of the hood towards you. To close the stroller, pull the rear locking mechanism in an upward direction, and unlock the pedal, located on the right side of the stroller, with your foot. To close the stroller completely, push the handles forward. Lock the stroller in the closed position with the locking device located on the side.

As shown in figure 4, insert pin A in the wheel. Insert the pin together with the wheel in the hole located at the lower end of the rear leg tube. Then insert the second wheel and washer B. Secure everything using clip C (fig. 4A). Cover both wheels with wheel cover D. Repeat the procedure on the other side.

Press simultaneously the two side buttons to adjust the leg rest to the desired position.

The maximum weight capacity of the storage basket is 3 kg.
Preparing document for printing…
0%