iPhone/iPad - Ulster University

iPhone/iPad - Ulster University
THESE INSTRUCTIONS ARE FOR IPhone/IPad (IPhone 4S)
We have used an IPhone 4S. The screenshots and menu options referenced here may be slightly
different depending on the version of the software running on your IPhone.
Also included are instructions for updating the stored password on your eduroam profile, removing
your Ulster eduroam profile from your device and how to connect to eduroam manually if already
at remote site.
Connecting to eduroam
1. When you are within range of a valid eduroam network, you should see “eduroam” listed as a
preferred network when you go to “Settings > Wi-Fi”. To connect, tap “Wi-Fi” on the “Settings”
screen. Ensure the “Wi-Fi” Slider is set to “On”.
2. Tap “eduroam” to connect.
1
3. Enter your username and password as below and then tap the “Join” button.
Username:
Staff: <staff ecode>@ad.ulster.ac.uk
Students: <student bcode>@sd.ulster.ac.uk
Password: Your network password
4. A security certificate will be displayed. Tap the “Accept” button. If the connection fails repeat step
3 and 4.
2
Updating the stored password on your eduroam profile (IPhone 4S)
1. Go to “Settings > Wi-Fi”. Tap on the blue arrow button beside “eduroam”.
2. Scroll to the bottom of the screen and where it says “HTTP Proxy”, tap the “Manual” button.
3. Slide “Authentication” to “On”. Type your username in the format described above, and type your
new password.
4. Scroll up to the top of the screen and tap on the “Wi-Fi” arrow at the top left hand side corner to
go back to the list of Wi-Fi networks. Try connecting to “eduroam” now that the credentials have
been updated.
3
Removing the Ulster eduroam profile from your Iphone/Ipad (IPhone 4S)
If you no longer require the eduroam service on your machine or are leaving the University of Ulster you
can remove the eduroam profile using the steps below.
1.
Go to “Settings > General” on your Iphone/Ipad, and tap “Profile” where it says “eduroam”.
2.
Tap the “Remove” button.
3.
When prompted to remove profile, tap the “Remove” button.
4
Connecting to eduroam manually if already at remote site
1. Go to “Settings -> Wi-Fi” and tap on “eduroam”
2. Enter your username and password as below and then tap the “Join” button.
Username:
Staff: <staff ecode>@ad.ulster.ac.uk
Students: <student bcode>@sd.ulster.ac.uk
Password: Your network password
3. You will be prompted to accept a security certificate temporarily. Please note, every time you
connect this way you will be prompted to accept the certificate. Tap the “Accept” button.
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement