4×4 HDMI Matrix - ABtUS Singapore

4×4 HDMI Matrix - ABtUS Singapore
4×4
HDMI Matrix
Model: MAX-HDMI44A-G
ABtUS SIGAPORE PTE LTD
www.abtussingapore.com
rev.10032017
ABtUS SINGAPORE PTE LTD
www.abtussingapore.com
User Operation Guide
PRODUCT DESCRIPTION
The MAX-HDMI44A-G 4x4 HDMI Matrix Switcher with Full 3D Support provides the most flexible and
cost effective solution in the market to route high definition video sources plus multi-channel (up to
7.1-channel) digital audio from any of the four HDMI sources to the remote displays at the same time.
This solution is well suited for use in home theater, conference room presentation systems, or other
similar setting or application.
FEATURES
● Support HDMI Deep Color & full 3D
● HDCP compliant
● Allows any source to be displayed on multiple displays at the same time
● Allows any HDMI display to view any HDMI source at any time
● Supports 7.1 channel digital audio
● Supports default HDMI EDID and learns the EDID of displays
● The matrix can switch every output channels to any HDMI inputs by push-in button, IR remote control,
RS-232 control, and Ethernet control
● Easy installation with rack-mounting and wall-mounting designs for matrix and receiver respectively
● Fast response time – 2~5 seconds for channel switch
PANEL DESCRIPTIONS
3
Front Panel
1
2
4
1. Source Status: Input source indicator LED
2. IR SENSOR: IR sensor for receiving the IR commands from IR remote
3. Output Push Button & 7-segment LED: Front panel push buttons used to select the
number of display channel & LED display for output ports
4. Input Push Button & 7-segment LED: Front panel push buttons used to select the number
of input source & LED display for input channels
Front Panel
5
6
7
8
9
5. RS-232: RS-232 control port
6. Ethernet: Ethernet control port
7. INPUT 1-4: HDMI inputs
8. Output 1-4: HDMI outputs
9. System IR Receiver: Ext. IR receiver
10. +5V DC: 5V DC power jack
2
*Specifications are subject to changes without notice.
10
OPERATING SYSTEM
Method A: Push-in Button
3
preset
save
learn
default
1. IN/OUT MAP
1) Use the “+”or “-“ output push button to select
the display
2) Use the “+”or “-“ input push button to select
the input source
“+”: change selected input/output port in
ascending order
“-”: change selected input/output port in
descending order
After you have selected the desired input/output
port, the LED will blink twice and the setting will
be in effect.
2. Save Mapping Mode
1) Keep pushing “output+ (save)”button until
the output LED shows “d.” to enter the
Save Mapping Mode.
2) Use the “+”or “-“ input push button to select
the mapping configuration (1~8) that you
want to save current input/output mapping
3)After you select the desired mapping
configuration number, the LED will blink
twice and the mapping setting will be
saved
4)If you push the “output- (preset)”button
before the mapping setting is saved, the
LED will show “ ̶ ” “ ̶ ”to quit the Save
Mapping Mode
3. Preset Mapping Mode
1) Keep pushing “output- (preset)”button until
the output LED shows “P.” to enter the
Preset Mapping Mode.
2) Use the “+”or “-“ input push button to select
the saved mapping configuration (1~8)
that you want to recall
3)After you select the desired mapping
configuration number, the LED will blink
twice and the mapping setting will be
effective
4)If you push the “output+ (save)”button
before the mapping setting is effective,
the LED will show “ ̶ ” “ ̶ ” to quit the Preset
Mapping Mode
4. Default EDID Mode
1) Push “input+ (default)”button to select the
input channel which you want to learn default
EDID and then keep pushing “input+
(default)”button when you select your desired
input channel
2) Push the “+”or “-” output push button and
then the LED will show “E”“d” one time to
enter Learn Default EDID Mode
3) Use “+”or “-” output push button to select the
default EDID mode(1~8)
4)Release “input+ (default)”button after
selecting the desired default EDID mode,
and then the LED will blink twice and the
setting will be effective
5) It will quit the Learn Default EDID Mode if you
push the “input- (learn)”button before the
setting is effective
6) The LED will show “0”“0” if the setting is
success
The LED will show “F”“F” if the setting is
failure
5. EDID Learning Mode
1) Push “input-(learn)”button to select the
input channel which you want to learn
EDID from HDMI output and then keep
pushing “input-(learn)”button when you
select your desired input channel
2) Push the “+”or “-” output push button and
then the LED will show “E”“L” one time to
enter Learn Output EDID Mode
3) Use “+”or “-” output push button to select
the output port number
4)Release “input-(learn)”button after
selecting the desired output port number,
and then the LED will blink twice and the
setting will be effective
5) It will quit the Learn Output EDID Mode if
you push the “input+ (default)”button
before the setting is effective
6) The LED will show “0”“0” if the setting is
success
The LED will show “F”“F” if the setting is
failure
*Specifications are subject to changes without notice.
OPERATING SYSTEM
Method B: IR Remote Control
1. IN/OUT Switch
Push the button on the checkerboard to select the
Input & Output port.
Ex: Select Input 2 to Output 3
Push the circled button as below to select Input 2
to Output 3
2.Function Key
*Specifications are subject to changes without notice.
4
User Operation Guide
OPERATING SYSTEM
5
*Specifications are subject to changes without notice.
User Operation Guide
EDID LEARNING
The EDID learning function is only necessary whenever you encounter any display on the HDMI
output port that cannot play audio and video properly. Because the HDMI source devices and
displays may have various level of capability in playing audio and video, the general principle is
that the source device will output the lowest standards in audio format and video resolutions to be
commonly acceptable among all HDMI displays. In this case, a 720p stereo HDMI signal output
would be probably the safest choice. Nevertheless, the user can force the matrix to learn the EDID
of the lowest capable HDMI display among others to make sure all displays are capable to play the
HDMI signals normally.
There are THREE methods to do EDID Learning as below,
1. Front Panel Push-in Button:
Please refer to the Operation Approach\ Method A: Push-in Button (Page 3)
2. IR Remote Control:
Please refer to the Operation Approach\ Method B: IR Remote Control (Page 5.)
There are eight embedded default EDID as below,
1. Full-HD([email protected])-24bit 2D & 2ch
2. Full-HD([email protected])-24bit 2D & 7.1ch
3. Full-HD([email protected])-24bit 3D & 2ch
4. Full-HD([email protected])-24bit 3D & 7.1ch
5. HD([email protected])([email protected])-24bit 2D & 2ch
6. HD([email protected])([email protected])-24bit 2D & 7.1ch
7. Full-HD([email protected])-36bit 2D & 2ch
8. Full-HD([email protected])-36bit 2D & 7.1ch
6
*Specifications are subject to changes without notice.
HDMI Source 1
HDMI Source 2
HDMI Source 3
HDMI Source 4
RS-232
HDMI Out 1
HDMI Out 2
HDMI Out 3
HDMI Out 4
DIAGRAM
*Specifications are subject to changes without notice.
7
SPECIFICATIONS
INPUT: 4 × HDMI
1 × RS-232
1 × Ethernet
1 × IR socket for IR receiver
OUTPUT: 4 × HDMI
HDMI INPUT SELECTION:
Push-in button / IR remote control /
RS-232 control / Ethernet control
IR REMOTE CONTROL:
Electro-optical characteristics: π = 25° /
Carrier frequency: 38kHz
HDMI CONNECTOR:
Type A [19-pin female]
RJ-45 CONNECTOR:
WE/SS 8P8C with 2 LED indicators
RS-232 CONNECTOR:
DE-9 [9-pin D-sub female]
HDMI COMPLIANCE
HDMI Deep Color & full 3D
HDCP COMPLIANCEYes
VIDEO BANDWIDTH
Single-link 225MHz [6.75Gbps]
VIDEO SUPPORT
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color
AUDIO SUPPORT
Surround sound (up to 7.1ch) or stereo digital audio
ESD PROTECTION
[1] Human body model — ±19kV [air-gap discharge]
& ±12kV [contact discharge]
[2] Core chipset — ±8kV
PCB STACK-UP
4-layer board
[impedance control — differential 100Ω; single 50Ω]
FIXEDNESS
1RU rack-mount with ears and Wall hanging holes
POWER SUPPLY
5V 4A DC
POWER CONSUMPTION
20 Watts [max]
OPERATION TEMPERATURE 0~40°C [32~104°F]
STORAGE TEMPERATURE
-20~60°C [-4~140°F]
RELATIVE HUMIDITY
20~90% RH [no condensation]
HOUSING: Metal case
GROSS DIMENSION: 524 × 265 × 76 mm
GROSS WEIGHT: 4.5 kg
ABtUS SINGAPORE PTE LTD
www.abtussingapore.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement