Hand Punch Memory upgrade procedure

Hand Punch Memory upgrade procedure
HandPunch Memory Upgrade Procedure
HandPunch Memory Upgrades (user capacity) are handled via an activation
code that is programmed into the HandPunch via the keyboard. The activation
code may be purchased from your Dealer.
To request a Memory Upgrade it is necessary to supply your Dealer with the
Serial Number of the HandPunch to be upgraded. This is because the activation
code is specific to an individual HandPunch reader.
Upgrade Programming Procedure:
1. Power up the HandPunch.
2. Wait until the date and time appear on the display.
3. Press the [CLEAR] [ENTER] keys simultaneously; you will then be
prompted to enter a Password.
4. Press [2] then [ENTER]
5. Press [NO] until “Upgrade” appears
6. Press [YES]
7. Enter the activation code provided by your Dealer (note: the display will
not show the numbers entered)
8. The display will say “Mem Upgrade XXX”
9. Press [Yes]
The Upgrade is now complete.
Acroprint Time Recorder Company | 5640 Departure Drive | Raleigh, NC 27616
Voice: 919-872-5800
Toll-free: 800-334-7190
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF