AIR-AIDE Airborne Particulate Monitor Cat. No. 770-600

AIR-AIDE Airborne Particulate Monitor Cat. No. 770-600
• High resolution and temperature stability
• Long-life air sample pump maintains accurate flow for particle separation
• Interchangeable size-selective impactors — choose PM10, PM2.5,
PM1.0, or ISO respirable (4.0 μm)
• Selection of built-in calibration factors for fine and coarse particulate matter
• 10-hour rechargeable NiMH battery
– Extended runs from AC power with supplied charger/adapter
• Large data storage capacity
– Run continuously for 15 months without downloading
• On-screen programming of sampling and data storage parameters
• DustComm Pro Software (PC-based) included for graphical and
statistical reporting
• User-defined audible alarm
• Location codes for tagging data
• Displays concentration in mg/m3 and TWA, STEL, Max, Min, date, and time
• Optional wireless data transmission to PC
The portable AIR-AIDE™ Airborne Particulate
Monitor is a fixed-point monitor used to
survey dust levels. AIR-AIDE is ideal for
indoor air quality investigations and as a tool
for compliance monitoring. With the 10-hour
NiMH battery, AIR-AIDE can sample for a full
day. For extended monitoring, run AIR-AIDE
from AC power using the supplied charger/
adapter. Results are displayed immediately or can
be stored in memory. At the end of monitoring,
download data to a PC. Supplied DustComm
Pro Software allows for graphical and statistical
representation of the total dust generating
SKC Inc. 724-941-9701
SKC-West 714-992-2780
SKC Gulf Coast 281-859-8050
SKC South 434-352-7149
Publication 1797 Rev 1601
AIR-AIDE Airborne Particulate Monitor
Portable Direct-reading Survey Tool with Wireless Data Transmission
AIR-AIDE Applications
Performance Profile
AIR-AIDE can be used for both indoor and ambient monitoring.
It is an excellent assistant tool for OSHA/EPA/ASHRAE compliance methods.
• Exposure monitoring of dusts and aerosols including:
- Lead
- Toxic soil remediation
- Welding fumes
- Tobacco smoke
- Silica
- Construction dust
- Coal dust
- Dry chemical
- Wood/paper
- Oil mists
- Concrete/cement
- Grinding dusts
- Cadmium
- Pharmaceuticals
- Nuisance dusts
- Spray paint
- Chromate
- Grain
• Pre-determination of air quality for ventilation system design
• Survey of workplace for compliance and related health reasons
• Monitoring indoor air quality in factories, offices, or homes for
respirable particulates
• LEED Green Building indoor air quality investigations
± 10% to filter gravimetric SAE fine test dust
0.001 mg/m3
NIOSH gravimetric method,
NIST traceable, SAE fine test dust
Sensing Range:
0.001 to 20.0 mg/m3 or
0.01 to 200 mg/m3 (optional)
Particulate Size Range:
0.1 to 100 μm
Particle Size Measurement: 1 μm, 2.5 μm, 4.0 μm, or 10 μm
± 0.003 mg/m3 (3 mg/m3)
Sampling Flow Rate:
2 L/min
Alphanumeric LCD, 4 lines, 20 characters,
mg/m3 concentration reading
Four-key splash-proof membrane switch
Analog Output:
0 to 2 VDC
Alarm Output:
90 dB at 3 ft
Record Time:
1 sec to 15 mos
Sampling Rate:
Short-term: 2, 4, and 10 sec
Long-term: 1, 10, and 30 min
Memory and Time Storage: > 5 years
Real-time Clock and Display: hours, minutes, seconds, day, month, year
Data Storage:
21,600 data points
Data Display:
Concentration in mg/m3 and TWA, Max,
Min, STEL, date, time
Digital Output:
Operating Temperature:
14 to 122 F (-10 to 50 C)
Storage Temperature:
-4 to 158 F (-20 to 70 C)
DustComm Pro Software for graphical and
data translation
Rechargeable NiMH battery
Run Time:
> 10 hrs (fully charged)
Charging Time:
< 10 hrs
95% non-condensing
3 x 6 x 9 in (7.6 x 15.2 x 22.9 cm)
5 lbs (2.3 kg)
Ordering Information
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy,
which provides SKC’s sole liability and the buyer’s exclusive remedy. To
view the complete SKC Limited Warranty and Return Policy, go to http://
SKC Inc. 724-941-9701
AIR-AIDE Monitor Kit includes monitor (0.001 to 20 mg/m3),
NiMH battery, charger/adapter (100-240 V), rotameter, impactor
sleeve for TSP, DustComm Pro Software, cable, and instruction
Impactor Grease
Size-selective Impactors
Wireless Data Transfer Radio Modem, 900 MHz,
up to 1500-foot transmission
Precipitation and Solar Cap
Tripod Mounting Stand for AIR-AIDE
Cleaning Kit includes dust-free air canister, swabs, and
lens tissue
Replacement Parts
Calibration Standard
Impactor Sleeve for TSP
Battery Pack, NiMH
SKC-West 714-992-2780
SKC Gulf Coast 281-859-8050
Cat. No.
SKC South 434-352-7149
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF