Cisco | CM7.0-K9-380D | Datasheet | Cisco SW Only, Unified CM 7.0 for HP DL380-G5

Cisco SW Only, Unified CM 7.0 for HP DL380-G5
Solution Overview
HP Server Solutions
®
Cisco is introducing software applications from the Cisco Unified Communications
portfolio that install on specific configurations of customer-provided HP DL380-G5 and
DL320-G5p servers. Available applications include: Cisco Unified Communications
Manager, Cisco Emergency Responder, Cisco Unified Application Environment, Cisco
®
Unity conferencing, Cisco Unity Connection, Cisco Unified Presence, Cisco Unified
®
Mobility Advantage, Cisco Unified MeetingPlace conferencing, Cisco Unified
MeetingPlace Express, Cisco Unified Contact Center Express, Cisco Unified Contact
Center Enterprise, Cisco Unified Customer Voice Portal, Cisco Unified IP Interactive
Voice Response (IP IVR), and Cisco Unified Expert Advisor.
Customer-provided servers must exactly match the vendor, make, model, specifications and parts
lists in the configurations listed in the following sections to be supported. Deviations are not
supported, and may result in an incomplete or failed install, or postinstallation problems.
Customer-provided servers must also be on the certified hardware compatibility list for the
intended software product and version.
Where equivalent Cisco MCS 7800 Media Convergence Server model numbers are given, they
should be interpreted as the configurations used by Cisco Unified Communications Manager. The
same MCS model used for other applications (where the MCS model has a different suffix) may
use different components and specifications. Contact your local Cisco account team for more
details.
Cisco Approved Hardware Configuration Requirements
HP DL380-G5 Server with Single Xeon 5140 2.33-GHz Processor and 146-GB Hard Drives
The DL380-G5 is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Xeon 5140 2.33-GHz processor. No specific
memory configuration is required as long as 2 GB of memory is provided (note that some product
versions may require more memory). It is the configuration equivalent of the base model Cisco
MCS 7835-H2 V02, with product-specific variants of MCS 7835-H2-IPC2, MCS 7835-H2-CCX2,
MCS 7835-H2-CCE2 and others.
HP General Ordering Instructions
Although HP has discontinued the sale of this configuration through its normal channels, the
company has created a special part number for Cisco customers and partners to order directly
from HP United States or an HP partner to obtain a supported system. The special part number
that you should order for this configuration is PN 470064-880.This special HP part number is
posted on the HP Corporate Product List and is orderable directly from HP or through HP partners,
but does not appear in many of the traditional HP sources of information such as Quickspecs, the
Product Bulletin, etc. Please advise your HP account manager, HP inside sales representative, or
HP partner accordingly and that person should be able to locate and quote this part number.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 23
Solution Overview
HP International Ordering Additional Instructions
This configuration is manufactured only in the United States but can be shipped globally. To order,
you should follow your standard local ordering process and contact your regional HP Sales
Operations team for assistance in routing the order.
HP’s individual country order management contacts are listed in Table 1.
Table 1.
HP Management Contacts
Country
HP Order Management Contact
Asia Pacific and Japan (APJ)
Michelle Ng michelle-sh.ng@hp.com
Austria
John Raps (acting) john.raps@hp.com
Belgium
Christophe Rigaux christophe.rigaux@hp.com
Denmark
Elisabeth Hassing elisabeth.hassing@hp.com
Finland
Minna Hyvonen minna.hyvonen@hp.com
France
Florence Epaud florence.epaud@hp.com
Germany
Gero Adrian gero.adrian@hp.com
Iberia
Francisco Borja Marin borja.marin@hp.com
Italy
Danilo Triulzi danilio.triulzi@hp.com
Latin America (LAR)
Helder Eloy helder.eloy@hp.com
Netherlands
Barbara Croon barbara.croon@hp.com
Norway
Edith Skarpsno edith.skarpsno@hp.com
Sweden
Goran Safstrom goran.safstrom@hp.com
Switzerland
John Raps john.raps@hp.com
United Kingdom
Denise Saunders denise.saunders@hp.com
United States
Tom Ehrich thomas.ehrich@hp.com
HP’s global “Fusion” enterprise-resource-planning (ERP) system is linked and regions can place
orders for fulfillment from HP plant 5200 (Houston, Tx). Shipments are routed to regional
distribution hubs prior to delivery to the respective customer in the destination (ordering) country.
Table 2 lists the components that will ship when you order this configuration.
Table 2.
Components of Part Number 470064-880
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
2GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/ DL385 G2 FIO
1
Battery-backed write cache upgrade
2
HP 146 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processors and 146-GB Hard Drives
The DL380-G5 is a robust server solution designed for Cisco Unified Communications software
applications. Up to 7500 Cisco Unified IP Phones can be supported on a single server. The
required processors are dual Intel Xeon 5140 2.33-GHz processors. No specific memory
configuration is required as long as 4 GB of memory is provided (note that some product versions
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 23
Solution Overview
may require more memory). It is the configuration equivalent of the Cisco MCS 7845-H2 V02 or
MCS 7845-H2-IPC2/CCX2/CCE2.
HP General Ordering Instructions
Although HP has discontinued the sale of this configuration through its normal channels, the
company has created a special part number for Cisco customers and partners to order directly
from HP United States or an HP partner to obtain a supported system. The special part number
that you should order for this configuration is PN 470064-887. This special HP part number is
posted on the HP Corporate Product List and is orderable directly from HP or through HP partners,
but does not appear in many of the traditional HP sources of information, such as Quickspecs, the
Product Bulletin, etc. Please advise your HP account manager, HP inside sales representative, or
HP partner accordingly and that person should be able to locate and quote this part number.
HP International Ordering Additional Instructions
This configuration is manufactured only in the United States but can be shipped globally. To order,
you should follow your standard local ordering process and contact your regional HP Sales
Operations team for assistance in routing the order. Refer to HP’s list of order management
contacts in Table 1.
HP’s global Fusion ERP system is linked and regions can place orders for fulfillment from HP plant
5200 (Houston, Tx). Shipments are routed to regional distribution hubs prior to delivery to the
respective customer in the destination (ordering) country.
Table 3 lists the components that will ship when you order this system.
Table 3.
Components of Part Number 470064-887
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB)
2
2 GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/ DL385 G2 FIO
1
Battery-backed write cache upgrade
4
HP 146 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G5 Server with Dual Xeon Quadcore E5345 2.33-GHz Processors and 146-GB
Hard Drives
The DL380-G5 is a robust server solution designed only for Cisco Unified Contact Center and
messaging products. The required processors are dual Intel Xeon quadcore E5345 2.33-GHz
processors. No specific memory configuration is required as long as 4 GB of memory is provided
(note that some product versions may require more memory). It is the configuration equivalent of
the Cisco MCS 7845-H2-ECS3/CCE3 or MCS 7845-H2-ECS4/CCE4.
HP General Ordering Notes
HP has created a special part number for Cisco customers and partners to order directly from HP
United States or an HP partner to obtain a supported system. The special part number that you
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 23
Solution Overview
must order for this configuration is PN AR111A (for –CCE3/ECS3 equivalent) or AR109A (for –
CCE4/ECS4 equivalent). This special HP part number is posted on the HP Corporate Product List
and is orderable directly from HP or through HP partners, but does not appear in many of the
traditional HP sources of information, such as Quickspecs, the Product Bulletin, etc. Please advise
your HP account manager, HP inside sales representative, or HP partner accordingly and that
person should be able to locate and quote this part number.
HP International Ordering Notes
This configuration is manufactured only in the United States but can be shipped globally. To order,
you should follow your standard local ordering process and contact your regional HP Sales
Operations team for assistance in routing the order. Refer to HP’s list of order management
contacts in Table 1.
HP’s global Fusion ERP system is linked and regions can place orders for fulfillment from HP plant
5200 (Houston, Tx). Shipments are routed to regional distribution hubs prior to delivery to the
respective customer in the destination (ordering) country.
Tables 4 and 5 list the components that will ship when you order this system.
Table 4.
Components of Part Number AR111A (equivalent of Cisco MCS 7845-H2-ECS3/CCE3)
Quantity
HP Part Number
Description
1
391835-B21
HP ProLiant DL380G5 Rack Chassis
1
437940-L21
Quad-Core Intel(r) Xeon(r) Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB)
DL380 G5 FIO Kit 1
1
437940-B21
Quad-Core Intel(r) Xeon(r) Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB)
DL380 G5 Opt Kit 1
2
397411-B21
2 GB FBD PC2-5300 2 x 1 GB Kit
1
405160-B21
P400/256 for DL380 G5/ DL385 G2 FIO
1
383280-B21
Battery-backed write cache upgrade
4
418367-B21
HP 146 GB SAS 10,000 rpm Hard Drive (2.5")
1
264007-B21
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
399771-001
Redundant Power Supply 350/370/380 G5 US Kit
Table 5.
Components of Part Number AR109A (equivalent of Cisco MCS 7845-H2-ECS4/CCE4)
Quantity
HP Part Number
Description
1
391835-B21
HP ProLiant DL380G5 Rack Chassis
1
437940-L21
Quad-Core Intel(r) Xeon(r) Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB)
DL380 G5 FIO Kit 1
1
437940-B21
Quad-Core Intel(r) Xeon(r) Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB)
DL380 G5 Opt Kit 1
2
397411-B21
2 GB FBD PC2-5300 2 x 1 GB Kit
1
405160-B21
P400/256 for DL380 G5/ DL385 G2 FIO
1
383280-B21
Battery-backed write cache upgrade
8
418367-B21
HP 146 GB SAS 10,000 rpm Hard Drive (2.5")
1
264007-B21
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
399771-001
Redundant Power Supply 350/370/380 G5 US Kit
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 23
Solution Overview
HP DL320-G5p Server with Intel E8400 3-GHz Processor
The DL320-G5p is a high-performance server platform for today’s unified communications
applications. It supports up to 1000 Cisco Unified IP Phones on a single server and up to 4000
Cisco Unified IP Phones when clustered properly. The required processor is an Intel E8400 3-GHz
processor. No specific memory configuration is required as long as 2 GB of memory is provided. It
is the configuration equivalent of the Cisco MCS 7825-H4-IPC1/CCX1/CCE1.
Table 6 lists the hardware configuration requirements.
Table 6.
Hardware Configuration Requirements
Quantity
HP Part Number
Description
1
445436-B21
HP DL320R05p Mod0 Svr
1
450436-B21
DL1U 2 DRV CAGE FIO KIT
1
509468-B21
HPZE8400 DL320G5p Proc Option Kit
2
450259-B21
HP 1GB UB PC2-6400 1x1GB Kit
2
458926-B21
HP 250GB 3G SATA 7.2K 3.5” MDL HDD
1
411508-B21
HP Smart Array E200 Controller
1
449991-B21
HP DL320G5p 12.7mm DVD Kit
1
450343-B21
DL320G5p iLO2 PORT OPT KIT
Contact HP for specific power-supply and power cord options.
Older Servers
Older Compaq or HP servers are still supported by the Cisco Unified Communications Manager
installation process.Following are the previously supported HP server configurations. This
information is provided for reference; most of these models have been discontinued by HP and
can no longer be purchased from HP or its resellers. Please see your local Cisco account team for
information about replacement models and ordering assistance.
HP DL380-G5 Server with Single Xeon 5140 2.33-GHz Processor
This server configuration is identical to the HP DL380-G5 server with a single Xeon 5140 2.33-GHz
processor and 146-GB hard drives, except that this configuration uses 72-GB hard drives and
supports different versions of IP Telephony OS and Cisco Unified Communications Manager. Note
that Cisco Unified Communications Manager 5.0 is not supported on this model. It is the
configuration equivalent of the Cisco MCS 7835-H2.
Although HP has discontinued the sale of its DL380-G5 with Intel 5140 through its normal
channels, the company has created a special part number to be ordered directly from HP United
States to obtain a supported system. The special part number that you should order for a single
processor system is PN 470064-770.
Table 7 lists the components that will ship when you order this system.
Table 7.
Components of Part Number 470064-770
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
2GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/ DL385 G2 FIO
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 23
Solution Overview
1
Battery-backed write cache upgrade
2
HP 72 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processors
This server configuration is identical to the HP DL380-G5 server with dual Xeon 5140 2.33-GHz
processors and 146-GB hard drives, except that this configuration uses 72-GB hard drives and
supports different versions of IPT OS and Cisco Unified Communications Manager. Note that
Cisco Unified Communications Manager 5.0 is not supported on this model. It is the configuration
equivalent of the Cisco MCS 7845-H2.
Although HP has discontinued the sale of its DL380-G5 with Intel 5140 through its normal
channels, the company has created a special part number to be ordered directly from HP US to
obtain a supported system. The special part number that you should order for a dual-processor
system is PN 470064-771.
Table 8 lists the components that will ship when you order this system.
Table 8.
Components of Part Number 470064-771
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB)
2
2 GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/ DL385 G2 FIO
1
Battery-backed write cache upgrade
4
HP 72 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
Compaq DL320 Server with Pentium III 800-MHz Processor
The DL320 is a high-performance server platform designed for today’s unified communications
applications. When clustered properly, 2000 users can be supported. The required processor is an
Intel Pentium III 800-MHz processor. No specific memory configuration is required as long as 512
MB of memory is provided. Table 9 lists the Compaq DL320 server configurations.
Table 9.
Compaq DL320 Server Configurations
Quantity
Compaq Part Number
Description
1
201501-001
ProLiant DL320-128 Model-1 ATA
1
212697-B21
20-GB ATA/100 7200 RPM Drive 1 in.
1
128278-B21
256 MB Registered 133-MHz SDRAM DIMM
1
128277-B21
128 MB Registered 133-MHz SDRAM DIMM
1
212691-B21
CD ROM/Diskette Assembly
1
174574-B21
Third-Party Cabinet Rack Kit (Optional)
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 23
Solution Overview
Compaq DL320 Server with Pentium III 1133-MHz Processor
The DL320 is a high-performance server platform designed for today’s unified communications
applications. When clustered properly, 4000 Cisco Unified CallManager or Cisco Unified
Communications Manager users can be supported. The required processor is an Intel Pentium III
1.133-GHz processor. No specific memory configuration is required as long as 1 GB of memory is
provided. Table 10 lists the Compaq DL320 server configurations.
Table 10.
Compaq DL320 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
Compaq Part Number
Description
1
251280-0021* DL320R01
P1133 512 A40G US
2
128279-B21
512 Reg. SDRAM DIMM 133 ALL
1
174574-B21
3rd Party Rack-Mount Kit (Optional)
*251280-002 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (002) with the codes as follows: 012 = Australia, 292 = Japan, 422 = Europe, and AA2 =
PRC.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
Compaq DL320-G2 Server with Pentium 4 2.26-GHz Processor
The DL320-G2 is a high-performance server platform designed for today’s unified communications
applications. When clustered properly, 4000 Cisco Unified CallManager or Cisco Unified
Communications Manager users can be supported. The required processor is an Intel Pentium 4
2.266-GHz processor. No specific memory configuration is required as long as 1 GB of memory is
provided. Table 11 lists Compaq DL320-G2 server configurations.
Table 11.
Compaq DL320-G2 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
336549-001*
DL320R02 P3.06/533 512 A1 US
2
287496-B21
512MB x 1 REG PC2100 DDR
1
230534-B21
40G 7.2K NHP ATA ALL
1
343791-B21
DL320/DL360 DVD/CDRW FLPY ALL
1
174574-B21
3rd PTYRK DL360G1/320 ALL (optional)
*289349-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, and 371 =
ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL320-G2 Server with Pentium 4 3060-MHz Processor
The DL320-G2 is a high-performance server platform designed for today’s unified communications
applications. When clustered properly, 4000 Cisco Unified CallManager or Cisco Unified
Communications Manager users can be supported. The required processor is an Intel Pentium 4
3.06-GHz processor. No specific memory configuration is required as long as 1 GB of memory is
provided. Table 12 lists HP DL320-G2 server configurations.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 23
Solution Overview
Table 12.
HP DL320-G2 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
336549-001*
DL320R02 P3.06/533 512 A1 US
2
287496-B21
512MB x 1 REG PC2100 DDR
1
230534-B21
40G 7.2K NHP ATA ALL
1
343791-B21
DL320/DL360 DVD/CDRW FLPY ALL
1
174574-B21
3rd PTYRK DL360G1/320 ALL (optional)
*336549-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, and 371 =
ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
powercord options.
HP DL320-G3 Server with Pentium 4 3.4-GHz Processor
The DL320-G3, which requires Cisco OS 2000.4.1, is a high-performance server platform for
today’s unified communications applications. It supports up to 1000 Cisco Unified IP Phones on a
single server and up to 4000 Cisco Unified IP Phones when clustered properly. The required
processor is an Intel Pentium 4 3.4-GHz processor. No specific memory configuration is required
as long as 2 GB of memory is provided. Table 13 lists hardware configuration requirements for the
HP DL320-G3.
Table 13.
Hardware Configuration Requirements for HP DL320-G3
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
370669-001*
DL320R03 P3.4-1MB, 1GB, 80GB SATA
1
354563-B21
1GB UNREG PC3200 1X1GB Memory
1
349237-B21
80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1")
1
374303-B21
DL320G3 DVD-ROM Drive
1
372702-B21
DL320G3 FLOPPY DRIVE (Required for installation of SW SATA RAID)
*370699-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, 371 = ADP,
and AA1-PRC.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL320-G4 Server with Pentium D 2.8-GHz Processor
The DL320-G4, which requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications
Manager 5.0.3, is a high-performance server platform for today’s unified communications
applications. It supports up to 1000 Cisco Unified IP Phones on a single server and up to 4000
Cisco Unified IP Phones when clustered properly. The required processor is an Intel Pentium D
2.8-GHz processor. No specific memory configuration is required as long as 2 GB of memory is
provided. This server is the configuration equivalent of the Cisco MCS 7825-H2-IPC1.Table 14 lists
the hardware configuration requirements for the HP DL320-G4.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 8 of 23
Solution Overview
Table 14.
Hardware Configuration Requirements for HP DL320-G4
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
410785-001* or
418307-291 (Japan
Only)
DL320G4 P920 Model 80
1
390824-B21
1GB DDR II 533 MHz/PC2-4200
1
349237-B21
80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1")
1
374303-B21
DL320G3 DVD-ROM Drive
*410785-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, 371 = ADP,
and AA1-PRC.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL320-G4 Server with Intel 950 3.4-GHz Processor
The DL320-G4, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications
Manager 5.1.1, is a high-performance server platform for today’s unified communications
applications. It supports up to 1000 Cisco Unified IP Phones on a single server and up to 4000
Cisco Unified IP Phones when clustered properly. The required processor is an Intel 950 3.4-GHz
processor. No specific memory configuration is required as long as 2 GB of memory is provided.
This server does not support Cisco Unified Communications Manager 5.0. It is the configuration
equivalent of the Cisco MCS 7825-H2-IPC2. Table 15 lists the hardware configuration
requirements for the H DL320-G4.
Table 15.
Hardware Configuration Requirements for HP DL320-G4
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
434769-001*
DL320G4 P950 A1 Server (includes 1 x 1-GB RAM)
1
390824-B21
1GB DDR II 533 MHz/PC2-4200
2
349237-B21
80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1")
1
374303-B21
DL320G4 DVD-ROM Drive
*434769-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, 371 = ADP,
and AA1-PRC.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL320-G5 Server with Intel 3050 Xeon 2.13-GHz Processor
The DL320-G5, which requires Cisco Windows OS 2000.4.5 or Cisco Windows OS 2003.1.2 or
Cisco Unified Communications Manager 6.0.1, is a high-performance server platform for today’s
unified communications applications. It supports up to 1000 Cisco Unified IP Phones on a single
server and up to 4000 Cisco Unified IP Phones when clustered properly. The required processor is
an Intel 3050 Xeon 2.13-GHz processor. No specific memory configuration is required as long as 2
GB of memory is provided. This server does not support Cisco Unified Communications Manager
5.0. It is the configuration equivalent of the Cisco MCS 7825-H3. Table 16 lists the hardware
configuration requirements for the HP DL320-G5 if ordered directly from HP, and Table 17 lists the
requirements if ordered directly from a HP reseller.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 9 of 23
Solution Overview
Table 16.
Hardware Configuration Requirements for HP DL320-G5 if Ordered Directly from HP
Quantity
HP Part Number
Description
1
415405-B21
HP DL320G5 MOD-FX Svr
1
419400-L21
HP DL320G5 Xeon 3050 FIO Kit
2
432804-B21
HP 1GB UB PC2-5300 1x1GB KIT ALL
2
349238-B21
HP 160GB 1" 7.2K SATA 1yr Wty HDD
1
374303-B21
HP DL320G3/G4 DVD-ROM Drive OPT
Contact HP for specific power-supply and power cord options.
Table 17.
Hardware Configuration Requirements for HP DL320-G5 if Ordered Directly from HP Reseller**
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
418044-001*
DL320 G5 X3050 / 1GB / 80GB SATA
1
432804-B21
HP 1GB UB PC2-5300 1x1GB KIT ALL
2
349238-B21
HP 160GB 1" 7.2K SATA 1yr Wty HDD
1
374303-B21
DL320G4 DVD-ROM Drive
*418044-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, 371 = ADP,
and AA1-PRC.
**Ordering this configuration from a reseller results in an 80-GB Serial ATA (SATA) drive being purchased but
unused.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
Compaq DL380 Server with Pentium III 1000-MHz Processor
The DL380 is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 users can be supported using the DL380 Pentium
III 1000-MHz processor. The required processor is an Intel Pentium III 1-GHz processor. No
specific memory configuration is required as long as 1 GB of memory is provided. Table 18 lists
the Compaq DL380 server configurations.
Table 18.
Compaq DL380 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
Compaq Part Number
Description
1
193706-001
ProLiant DL380R01 P1000/133-128
1
142673-B22
18.2GB Pluggable Wide Ultra SCSI3 Universal 10K Drive
1
128279-B21
512MB Registered 133-MHz SDRAM DIMM
1
128278-B21
256MB Registered 133-MHz SDRAM DIMM
1
128277-B21
128MB Registered 133-MHz SDRAM DIMM
1
143397-001
DL380 275-Watt HP RPS Module
1
295513-B22
12/24-Gigabyte DAT Drive (DDS-3)-Opal (Optional)
Compaq DL380 G2 Server with Pentium III 1266-MHz Processor
The DL380-G2 is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 Cisco Unified CallManager or Cisco Unified
Communications Manager users can be supported. The required processor is an Intel Pentium III
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 10 of 23
Solution Overview
1.266-GHz processor. No specific memory configuration is required as long as 1 GB of memory is
provided. Table 19 lists the Compaq DL380-G2 server configurations.
Table 19.
Compaq DL380-G2 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
Compaq Part Number
Description
1
235438-001*
DL380R02 P1266 512 US
2
142673-B22
18.2-GB Pluggable Ultra3 SCSI 10K rpm HDD
1
201694-B21
1024-MB PC133-MHz ECC SDRAM Memory (2 x 512 MB)
1
225011-001**
DL380 G2 Hot Plug Redundant Power Supply US
1
228894-B21
3rd Party Rack MTG Kit-DL380 (Optional)
1
215488-B21
20/40-GB DAT, HOT PLUG (Optional)
*235438-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 041 = Germany, 051 = France,
291 = Japan, 371 = APD, 421 = Europe (contains documentation on a multilingual CD), and AA1 = PRC.
**225011-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 021 = International, 031 = UK, 291 =
Japan, and 421 = Europe.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G2 Server with Pentium III 1400 Processor
The DL380-G2 is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Pentium III 1.4-GHz processor. No specific
memory configuration is required as long as 1 GB of memory is provided. Table 20 lists the HP
DL380-G2 server configurations.
Table 20.
HP DL380-G2 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
Compaq Part Number
Description
1
253864-001*
ProLiant DL380R02 P1400 512 US
2
142673-B22
18.2-GB Pluggable Ultra3 SCSI 10K rpm HDD
1
201694-B21
1024-MB PC133-MHz ECC SDRAM Memory (2 x 512 MB)
1
225011-001**
DL380 G2 Hot Plug Redundant Power Supply US
1
228894-B21
3rd Party Rack MTG Kit-DL380 (Optional)
1
215488-B21
20/40-GB DAT, HOT PLUG (Optional)
*253864-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 041 = Germany, 051 = France,
291 = Japan, 371 = APD, 421 = Europe (contains documentation on a multilingual CD), and AA1 = PRC.
**225011-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 021 = International, 031 = UK, 291 =
Japan, and 421 = Europe.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 11 of 23
Solution Overview
HP DL380-G3 Server with Xeon 2400 Processor
The DL380-G3 is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Xeon 2.4-GHz processor. No specific memory
configuration is required as long as 1 GB of memory is provided. Table 21 lists the HP DL380-G3
server configurations.
Table 21.
HP DL380-G3 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
Compaq Part Number
Description
1
257917-001*
DL380 R03 P2400 US
2
286713-B22 or
286776-B22
36GB 10K U320 UNI HDD ALL
1
264007-B21
DVDROM DRV SLIM 8/24X ALL
1
300678-B21
512-MB REG PC2100 2X256 ALL
1
293052-B21
3rd Party Rack DL380G3 ALL
1
313054-001
HP RPS DL380 G3 US (US Power Supply)
1
313045-B21
HP RPS DL380 G3 WW (Non-US Power Supply)
1
215488-B21
20/40-GB HP DAT Drive (optional)
36GB 15K U320 UNI HDD ALL
*257917-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options
HP DL380-G3 Server with Xeon 3060 Processor
The DL380-G3 is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Xeon 3.06-GHz processor. No specific memory
configuration is required as long as 1 GB of memory is provided. Table 22 lists the HP DL380-G3
server configurations.
Table 22.
HP DL380-G3 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
310587-001*
DL380R03 X3.06-512KB/533-1GB
2
286713-B22 or
286776-B22
36-GB 10K U320 UNI HDD ALL
1
331903-B21
COMBO DRV 24X SLIM CARBON ALL
1
293052-B21
3rd Party Rack DL380G3 ALL
1
313054-001
HP RPS DL380 G3 US (US Power Supply)
1
313045-B21
HP RPS DL380 G3 WW (Non-US Power Supply)
1
215488-B21
20/40-GB HP DAT Drive (optional)
36-GB 15K U320 UNI HDD ALL
*310587-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 12 of 23
Solution Overview
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G4 Server with Xeon 3.4-GHz Processor
The DL380-G4, which requires Cisco OS 2000.2.7, is a robust server solution designed for Cisco
Unified Communications software applications. When clustered properly, 10,000 Cisco Unified
Communications Manager users can be supported. The required processor is an Intel Xeon 3.4GHz processor. No specific memory configuration is required as long as 2 GB of memory is
provided. Table 23 lists the hardware configuration requirements for the HP DL380-G4.
Table 23.
Hardware Configuration Requirements for HP DL380-G4
(Order all the HP parts in this table to obtain a supported configuration)
Quantity
HP Part Number
Description
1
311143-001*
DL380R04 X3.4/800-1M US
1
343056-B21
2-GB (2x1GB) PC3200 DDR2
2
286778-B22
72-GB U320 15KRPM HDDs
1
264007-B21
Slimline DVD-ROM Option Kit
1
364507-B21
DL380G4 FLPY DRV w/BRKTS ALL
1
355892-B21
HP RPS DL380 G4 ALL
1
346914-B21
BBWC Enabler for SA6i+
1
293048-B21
DL 380 G3 Redundant Fan Option Kit.
1
215488-B21
20/40-GB HP DAT Drive (optional)
*311143-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G4 Server with Xeon 3.4-GHz Processor
The DL380-G4, which requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications
Manager 5.0.3, is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Xeon 3.4-GHz processor. No specific memory
configuration is required as long as 2 GB of memory is achieved. This server is the configuration
equivalent of the Cisco MCS 7835-H1. Table 24 lists the hardware configuration requirements for
the HP DL380-G4.
Table 24.
Hardware Configuration Requirements for HP DL380-G4
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
378737-001*
DL380R04 X3.4/800 2M US
1
343056-B21
2-GB (2 x 1-GB) PC3200 DDR2
2
286778-B22
72-GB U320 15K RPM HDDs
1
264007-B21
Slimline DVD-ROM Option Kit
1
364507-B21
DL380G4 FLPY DRV w/BRKTS ALL
1
355892-B21 or
355892-001
(Japan only)
HP RPS DL380 G4 ALL
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 13 of 23
Solution Overview
1
346914-B21
BBWC Enabler for SA6i+
1
293048-B21
DL 380 G3 Redundant Fan Option Kit
1
378737-001*
DL380R04 X3.4/800 2M US
*378737-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G5 Server with Xeon 5140 2.33-GHz Processor
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications
Manager 5.1.1(b), is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Xeon 5140 2.33-GHz processor. No specific
memory configuration is required as long as 2 GB of memory is provided. This server does not
support Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco
MCS 7835-H2.
Although HP has discontinued the sale of its DL380-G5 with Intel 5140 through its normal
channels, the company has created a special part number to be ordered directly from HP United
States to obtain a supported system. The special part number that you should order for a single
processor system is PN 740064-770.
Table 25 lists the components that will ship when you order this system.
Table 25.
Components of Part Number 740064-770
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
2GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/ DL385 G2 FIO
1
Battery-backed write cache upgrade
2
HP 72 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G2 Server with Dual Pentium III 1400-MHz Processor
The DL380-G2 is a robust server solution designed for Cisco Unified Communications software
applications. Up to 7500 IP phones can be supported on a single server running Cisco
CallManager 3.3 or later. The required processors are dual Intel Pentium III 1.4-GHz processors.
No specific memory configuration is required as long as 2 GB of memory is provided. Table 26 lists
the HP DL380-G2 server configurations.
Table 26.
HP DL380-G2 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
Compaq Part Number
Description
1
253864-001*
ProLiant DL380R02 P1.40GHz-512KB
1
201099-B21
1.40-GHz PIII Processor Option Kit (DL380 G2)
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 14 of 23
Solution Overview
4
232432-B22
72-GB 1-in. U3 Hot Plug 10K RPM Universal SCSI Hard Drive
1
201695-B21
2-GB 133-MHz SDRAM DIMM Memory (2x1GB)
1
225011-001**
DL380 G2 Hot Plug Redundant Power Supply US
1
228894-B21
3rd Party Rack MTG Kit-DL380 (Optional)
1
215488-B21
20/40-GB DAT, HOT PLUG (Optional)
*253864-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 041 = Germany, 051 = France,
291 = Japan, 371 = APD, 421 = Europe (contains documentation on a multilingual CD), and AA1 = PRC.
**225011-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 021 = International, 031 = UK, 291 =
Japan, and 421 = Europe.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G3 Server with Dual Xeon 2.4-GHz Processors
The DL380-G3 is a robust server solution designed for Cisco Unified Communications software
applications. Up to 7500 IP phones can be supported on a single server running Cisco
CallManager 3.3 or later. The required processors are dual Intel Xeon 2.4-GHz processors. No
specific memory configuration is required as long as 4 GB of memory is provided. Table 27 lists
the HP DL380-G3 server configurations.
Table 27.
HP DL380-G3 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
257917-001
DL380 R03 P2400 US
1
257913-B21
X2.4/400 370/380 G3 ALL
4
286714-B22
72GB 10K U320 UNI HDD ALL
1
264007-B21
DVDROM DRV SLIM 8/24X ALL
2
300679-B21
1-GB REG PC2100 2X512 ALL
1
300680-B21
2-GB REG PC2100 2x1024 ALL
1
293052-B21
3rd Party Rack DL380G3 ALL
1
293048-B21
FAN HP RED DL380G3 ALL
1
313054-001
HP RPS DL380 G3 US (US Only)
1
313045-B21
HP RPS DL380 G3 WW (Non-US Power Supply)
1
215488-B21
20/40-GB HP DAT Drive (optional)
*257917-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G3 Server with Dual Xeon 3.06-MHz Processors
The DL380-G3 is a robust server solution designed for Cisco Unified Communications software
applications. Up to 7500 IP phones can be supported on a single server running Cisco
CallManager 3.3 or later. The required processors are dual Intel Xeon 2.4-GHz processors. No
specific memory configuration is required as long as 4 GB of memory is provided. Table 28 lists
the HP DL380-G3 server configurations.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 15 of 23
Solution Overview
Table 28.
HP DL380-G3 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
310587-001*
DL380R03 X3.06-512-KB/533-1GB
1
257916-B21
X3.06/533 370/380G3 ALL
4
286714-B22
72-GB 10K U320 UNI HDD ALL
1
331903-B21
COMBO DRV 24X SLIM CARBON ALL
1
300679-B21
1-GB REG PC2100 2X512 ALL
1
300680-B21
2-GB REG PC2100 2x1024 ALL
1
293052-B21
3rd Party Rack DL380G3 ALL
1
293048-B21
FAN HP RED DL380G3 ALL
1
313054-001
HP RPS DL380 G3 US (US Only)
1
313045-B21
HP RPS DL380 G3 WW (Non-US Power Supply)
1
215488-B21
20/40-GB HP DAT Drive (optional)
1
255514-B21
Battery Backed Write Cache Enabler Kit
*310587-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G4 Server with Dual Xeon 3.4GHz Processors
The DL380-G4, which requires Cisco OS 2000.2.7, is a robust server solution designed for Cisco
Unified Communications software applications. Up to 7500 Cisco Unified IP Phones can be
supported on a single server running Cisco CallManager 3.3 or later. The required processors are
dual Intel Xeon 3.4-GHz processors. No specific memory configuration is required as long as 4 GB
of memory is provided. Table 29 lists the hardware configuration requirements for the HP DL380G4.
Table 29.
Hardware Configuration Requirements for HP DL380-G4
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
311143-001*
DL380R04 X3.4/800-1M US
1
311583-B21
X3.4/800-1M 370/380 G4 ALL
2
343056-B21
2-GB (2x1GB) PC3200 DDR2
1
264007-B21
Slimline DVD-ROM Option Kit
1
364507-B21
DL380G4 FLPY DRV w/BRKTS ALL
4
286778-B22
72-GB U320 15KRPM HDDs
1
355892_B21
HP RPS DL380G4 ALL
1
346914-B21
BBWC Enabler for SA6i+
1
203048-B21
DL380 G3 Redundant Fan Option Kit
1
215488-B21
20/40-GB HP DAT Drive (optional)
*311143-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 16 of 23
Solution Overview
HP DL380-G4 Server with Dual Xeon 3.4-GHz Processors
The DL380-G4, which requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications
Manager 5.0.3, is a robust server solution designed for Cisco Unified Communications software
applications. Up to 7500 Cisco Unified IP Phones can be supported on a single server running
Cisco CallManager 3.3 or later. The required processors are dual Intel Xeon 3.4-GHz processors.
No specific memory configuration is required as long as 4 GB of memory is achieved. This server
is the configuration equivalent of the Cisco MCS 7845-H1. Table 30 lists the hardware
configuration requirements for the HP DL380-G4.
Table 30.
Hardware Configuration Requirements for HP DL380-G4
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
378737-001*
DL380R04 X3.4/800 2M US
1
378750-B21
X3.4/800 2M 370/380 G4 ALL
2
343056-B21
2-GB (2x1GB) PC3200 DDR2
1
264007-B21
Slimline DVD-ROM Option Kit
1
364507-B21
DL380G4 FLPY DRV w/BRKTS ALL
4
286778-B22
72-GB U320 15KRPM HDDs
1
355892-B21 or
355892-001
(Japan only)
HP RPS DL380G4 ALL
1
346914-B21
BBWC Enabler for SA6i+
1
293048-B21
DL380 G3 Redundant Fan Option Kit
*378737-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G5 Server with Xeon 5140 2.33-GHz Processor
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications
Manager 5.1.1(b), is a robust server solution designed for Cisco Unified Communications software
applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Xeon 5140 2.33-GHz processor. No specific
memory configuration is required as long as 2 GB of memory is provided. This server does not
support Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco
MCS 7835-H2. Table 31 lists the hardware configuration requirements for the HP DL380-G5.
Table 31.
Hardware Configuration Requirements for HP DL380-G5
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
417456-001*
HP DL380G5 5140 2G (includes server, proc, 2 x 1-GB RAM, P400/256**, 1 RPS
1
383280-B21
Battery-backed write cache upgrade
2
375861-B21
HP 72 GB SAS 10,000-rpm Hard Drive (2.5")
1
264007-B21
Slimline DVD-ROM Option Kit
1
399771-001
Redundant Power Supply 350/370/380 G5 US Kit (IEC cord only)
1
410570-B21
PCI-X/E Mixed Riser Option (DL380G5)
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 17 of 23
Solution Overview
*417456-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
**If you plan to build this server from parts rather than ordering part number 417456-001, you should use part
number 405160-B21 (HP Smart Array P400/256 DL38x LP FIO Ctr.) as the controller and place the card in slot
1.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processors
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications
Manager 5.1.1(b), is a robust server solution designed for Cisco Unified Communications software
applications. Up to 7500 Cisco Unified IP Phones can be supported on a single server running
Cisco CallManager 3.3 or later. The required processors are dual Intel Xeon 5140 2.33-GHz
processors. No specific memory configuration is required as long as 4 GB of memory is provided.
This server does not support Cisco Unified Communications Manager 5.0. It is the configuration
equivalent of the Cisco MCS 7845-H2. Table 32 lists the hardware configuration requirements for
the HP DL380-G5.
Table 32.
Hardware Configuration Requirements for HP DL380-G5
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity
HP Part Number
Description
1
417456-001*
HP DL380G5 5140 2G (includes server, proc, 2 x 1-GB RAM, P400/256**, 1RPS
1
418322-B21
Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB)
1
397411-B21
2 GB FBD PC2-5300 2 x 1-GB Kit (2-GB RAM additional for 4 GB total for config)
1
383280-B21
Battery-backed write cache upgrade
4
375861-B21
HP 72 GB SAS 10,000 rpm Hard Drive (2.5 in.)
1
264007-B21
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
399771-B21
Redundant Power Supply 350/370/380 G5 US Kit (IEC cord only)
1
410570-B21
PCI-X/E Mixed Riser Option (DL380G5)
*417456-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 031 = UK, 291 = Japan, 421 = Europe,
and 371 = ADP.
**If you plan to build this server from parts rather than ordering part number 417456-001, you should use part
number 405160-B21 (HP Smart Array P400/256 DL38x LP FIO Ctr.) as the controller and place the card in slot
1.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processors
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications
Manager 5.1.1(b), is a robust server solution designed for Cisco Unified Communications software
applications. Up to 7500 Cisco Unified IP Phones can be supported on a single server running
Cisco CallManager 3.3 or later. The required processors are dual Intel Xeon 5140 2.33-GHz
processors. No specific memory configuration is required as long as 4 GB of memory is achieved.
This server does not support Cisco Unified Communications Manager 5.0. It is the configuration
equivalent of the Cisco MCS 7845-H2.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 18 of 23
Solution Overview
Although HP has discontinued the sale of its DL380-G5 with Intel 5140 through its normal
channels, the company has created a special part number to be ordered directly from HP United
States to obtain a supported system. The special part number that you should order for a dualprocessor system is PN 740064-771.
Table 33 lists the components that will ship when you order this system.
Table 33.
Components of Part Number 740064-771
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB)
2
2 GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/ DL385 G2 FIO
1
Battery-backed write cache upgrade
4
HP 72 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
Cisco Application Software Ordering Information
Tables 34 through 42, 44, 46, 47, 49, and 50 list ordering information for the various Cisco Unified
Communications platforms. Table 43 lists the supported platforms for Cisco Unified Contact Center
Express and Cisco Unified IP Interactive Voice Response (IP IVR), and Tables 45 and 48 list the
supported servers for the various platforms.
Table 34.
Ordering Information for Cisco Unified Communications Manager 7.0
Server Model
Processor
Capacity
Cisco Part Number
DL380-G5
Single processor Xeon 5140 2.33 GHz
2500 IP phones
CM7.0-K9-DL380
DL380-G5
Dual processor Xeon 5140 2.33 GHz
5000 IP phones*
CM7.0-K9-380D
*An additional 2500 server user license is available to increase the capacity of this model up to 7500 server
users. To obtain this license, order part number LIC CCM 7.X-2500=.
Table 35.
Ordering Information for Cisco Unified Communications Manager 6.1
Server Model
Processor
Capacity
Cisco Part Number
DL380-G5
Single processor Xeon 5140 2.33 GHz
2500 IP phones
CM6.1-K9-380G5
DL380-G5
Dual processor Xeon 5140 2.33 GHz
5000 IP phones *
CM6.1-K9-380G5D
*An additional 2500 server user license is available to increase the capacity of this model up to 7500 server
users. To obtain this license, order part number LIC CCM 6.X-2500=.
Table 36.
Ordering Information for Cisco Unified Communications Manager 6.0
Server Model
Processor
Capacity
Cisco Part Number
DL380-G5
Single processor Xeon 5140 2.33 GHz
2500 IP phones
CM6.0-K9-380G5
DL380-G5
Dual processor Xeon 5140 2.33 GHz
5000 IP phones *
CM6.0-K9-380G5D
*An additional 2500 server user license is available to increase the capacity of this model up to 7500 server
users. To obtain this license, order part number LIC CCM 6.X-2500=.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 19 of 23
Solution Overview
Table 37.
Ordering Information for Cisco Unified Communications Manager 5.1
Server Model
Processor
Capacity
Cisco Part Number
DL380-G5
Single processor Xeon 5140 2.33 GHz
2500 IP phones
CM5.1-K9-380G5
DL380-G5
Dual processor Xeon 5140 2.33 GHz
5000 IP phones *
CM5.1-K9-380G5D
*An additional 2500 server user license is available to increase the capacity of this model up to 7500 server
users. To obtain this license, order part number LIC CCM 5.X-2500=.
Table 38.
Ordering Information for Cisco Unified Communications Manager 4.3
Server Model
Processor
Capacity
Cisco Part Number
DL380-G5
Single processor Intel Xeon 5140 2.33 GHz
2500 IP phones
CM4.3-K9-380G5-1
DL380-G5
Dual processor Intel Xeon 5140 2.33 GHz
5000 IP phones *
CM4.3-K9-380G5D-1
*An additional 2500 server user license is available to increase the capacity of this model up to 7500 server
users. To obtain this license, order part number LIC CCM 4.X-2500=.
Table 39.
Ordering Information for Cisco Emergency Responder 7.0
Server Model
Processor
D320-G5p
Not supported by Cisco Emergency Responder 7.0
Capacity
DL380-G5
Single Processor Intel Xeon
5140 2.33 GHz
Cisco Part Number
● 20,000 IP phones
● 5,000 manual phones
SW-ER-7.0-7835-K9=
● 2,000 roaming IP phones
● 1,000 switches
KEY-ER7.X-500=
● 60,000 switch ports
KEY-ER7.X-5K=
KEY-ER7.X-100=
KEY-ER7.X-1K=
KEY-ER7.X-10K=
DL380-G5
Dual Processor Intel Xeon
5140 2.33 GHz
● 30,000 IP phones
● 10,000 manual phones
SW-ER-7.0-7845-K9=
● 3,000 roaming IP phones
● 2,000 switches
KEY-ER7.X-500=
● 120,000 switch ports
KEY-ER7.X-5K=
KEY-ER7.X-100=
KEY-ER7.X-1K=
KEY-ER7.X-10K=
Table 40.
Ordering Information for Cisco Emergency Responder 2.0
Server Model
Processor
DL320-G5p
Single-processor Intel
E8400/E3110 3 GHz
DL380-G5
Single-processor Xeon 5140
2.33 GHz
Capacity
Cisco Part Number
● 12,000 IP phones
● 2,500 manual phones
SW-ER-2.0-SVR-K9=
● 1,200 roaming IP phones
● 500 switches
KEY-ER2.X-500=
● 30,000 switch ports
KEY-ER2.X-5K=
● 20,000 IP phones
● 5,000 manual phones
KEY-ER2.X-10K=
KEY-ER2.X-100=
KEY-ER2.X-1K=
● 2,000 roaming IP phones
● 1,000 switches
● 60,000 switch ports
DL380-G5
Dual-processor Xeon 5140
2.33 GHz
● 30,000 IP phones
● 10,000 manual phones
● 3,000 roaming IP phones
● 2,000 switches
● 120,000 switch ports
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 20 of 23
Solution Overview
Table 41.
Ordering Information for Cisco Unified MeetingPlace Conferencing
Server Model
Processor
Description
DL380-G5
Single-processor Intel Xeon
5140 2.33 GHz
Supports Cisco Unified MeetingPlace
solution bundles with <480 voice user
licenses and <50 concurrent Web
conferencing licenses
Cisco Part Number
Unified MP 6.0
● MP-8106-30IP
● MP-8106-60IP-C
● MP-8106-120IP
● MP-8112-180IP
● MP-8112-180IP-E
● MP-8112-192
● MP-8112-180PRI
Unified MP 7.0
● MP-3515-40
● MP-3545-40
● MP-3545-180
● MP-3515-NFR
DL380-G5
Dual-processor Intel Xeon
5140 2.33 GHz
Supports standard Cisco Unified
MeetingPlace solution bundles with >480
voice user licenses or 500 concurrent
Web conferencing licenses per server
Unified MP 6.0
● MP-8112-510IP
● MP-8112-510PRI
● MP-8112-600
Unified MP 7.0
● MP-3545-500
Table 42.
Ordering Information for Cisco Unified MeetingPlace Express
Server Model
Processor
Capacity
Cisco Part Number
DL380-G5
Single-processor Intel Xeon
5140 2.33GHz
Cisco MeetingPlace Express 2.0 ME
Bundle-25 Voice,,6 Web, 6 Video
Concurrent ULs
MPE-ME
DL380-G5
Dual-processor Intel Xeon
5140 2.33GHz
Cisco MeetingPlace Express 2.0 LE
Bundle-85 voice,,6 Web, 6 Video
Concurrent ULs
MPE-LE
Table 43.
Supported Platforms for Cisco Unified Contact Center Express and Cisco Unified IP IVR
Description
Processor
DL380-G5
Single processor Intel 5140 Xeon 2.33 GHz
DL380-G5
Dual processor Intel 5140 Xeon 2.33 GHz
Table 44.
Ordering Information for Cisco Unified Contact Center Express
Description
Part Number
Cisco Unified Contact Center Express Release 5.0
CCX-50-STANDARD
CCX-50-ENHANCED
CCX-50-PREMIUM
Cisco Unified Contact Center Express Release 6.0
CCX-60-STANDARD
CCX-60-ENHANCED
CCX-60-PREMIUM
Cisco Unified Contact Center Express Release 7.0
CCX-70-NEW
Cisco Unified Contact Center Express Release 5.0
CCX-50-STANDARD
CCX-50-ENHANCED
CCX-50-PREMIUM
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 21 of 23
Solution Overview
Table 45.
Supported Servers for Cisco Unified Intelligent Contact Management Enterprise and Hosted and
Cisco Unified Contact Center Enterprise and Hosted and Cisco Unified Customer Voice Portal
Server Model
Processor
DL380-G5
Single-processor Xeon 5140 2.33 GHz
Yes
DL380-G5
Dual-processor Xeon 5140 2.33 GHz
Yes
DL380-G5
Dual-processor Xeon 5345 2.33GHz
Quad Core
Yes
Table 46.
Supported
Ordering Information for Cisco Unified Intelligent Contact Management Hosted and Cisco Unified
Contact Center Enterprise and Hosted
Description
Cisco Part Number
Cisco Unified Intelligent Contact Management Hosted
HOSTED-BUNDLE
Cisco Unified Contact Center Hosted
HOSTED-BUNDLE
Cisco Unified Intelligent Contact Management Enterprise
ICME-BUNDLE
Cisco Unified Contact Center Enterprise
IPCE-BUNDLE
Table 47.
Ordering Information for Cisco Unified Customer Voice Portal
Description
Cisco Part Number
Cisco Unified Customer Voice Portal 3.1
CVP-3.1
Cisco Unified Customer Voice Portal 3.x
CVP-3.X
Cisco Unified Customer Voice Portal 4.x
CVP-4.X
Cisco Unified Customer Voice Portal 7,x
CVP-7.X
Table 48.
Supported Servers for Cisco Unified Expert Agent
Server Model
Processor
Supported
DL380-G5
Single-processor Xeon 5140 2.33GHz
Yes
DL380-G5
Dual-processor Xeon 5140 2.33GHz
Yes
Table 49.
Ordering Information for Cisco Unified Expert Agent
Description
Cisco Part Number
Cisco Unified Expert Agent
EA-BUNDLE
Table 50.
Ordering Information for Cisco Unified IP IVR
Description
Part Number
Cisco Unified IP IVR Release 5.0
IVR-5.0-NEW
Cisco Unified IP IVR Release 6.0
IVR-6.0-NEW
Cisco Unified IP IVR Release 7.0
IVR-7.0-NEW-BUNDLE
Configure your server order through the Direct Plus HP webpage, specials, and promotions. Enter
affiliate pass code 4080.
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 22 of 23
Solution Overview
Printed in USA
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C02-361412-12
01/09
Page 23 of 23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising