FIGURE A

ARROW 'A'

COMPUTER DISPLAY

DS-DA-405

INSTALLATION INSTRUCTIONS:

product purchased. However, all installation instructions are still applicable unless otherwise noted.

1.

• screen stiffener installation by inspecting the mounting bracket hardware:

2.

• If the mounting bracket hardware has a phillips drive, item #2

Align holes in screen stiffener pivot bracket with mounting holes on left side of docking station, as shown.

3.

ADJUSTMENT KNOB

NOTE: When a pre-applied thread-locking patch is not present on hardware, it is recommended to apply a drop of medium strength (blue) thread locking adhesive to the threads of the hardware prior to assembly.

SCREEN STIFFENER OPERATION:

1.

upper portion of screen stiffener in direction of Arrow 'A' just enough to allow the computer's display to be rotated

2.

To adjust viewing angle of computer's display, loosen position. Re-tighten adjustment knob to secure position.

HARDWARE

(INSTALLATION STEP 1)

DRAWING NUMBER:

DS-DA-405_INST

Sheet 1 of 2

ITEM #

1

2

HARDWARE KIT CONTENTS

DESCRIPTION QTY.

FINISH

SCREW, BUTTON HEAD, M4 X 0.7 X 8MM LONG

SCREW, PAN HEAD, #8-32 X 5/16" LONG

2

2

PLAIN

PLAIN W/ PATCH

DRIVE STYLE/SIZE

HEX 2.5MM

#2 PHILLIPS

WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,

IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND

DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE

OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY

DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN

ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND

MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE

OPERATING VEHICLE.

PRODUCT DESCRIPTION

SCREEN STIFFENER FOR DS-PAN-210 & 220

SERIES DOCKING STATIONS

DS-DA-405 03-03-11

PRODUCT NAME

INSTALLATION INSTRUCTIONS,

DS-DA-405

1-800-524-9900

WWW.HAVIS.COM

REV. DATE

F-730-019 REV A

SCREEN STIFFENER

INSTALLATION DO'S AND DON'TS

DO:

1) UNDERSTAND HOW YOUR VEHICLE'S AIRBAG DEPLOYS. CHECK WITH THE VEHICLE MANUFACTURER OR CALL HAVIS FOR ASSISTANCE.

2) INSTALL IN AN "AIR BAG SAFE" ZONE; TYPICALLY, THE LEFT-HAND (DRIVER'S) SIDE OF THE DOCK.

3) IF YOU PLAN TO USE THE STYLUS HOLDER IN THE SCREEN STIFFENER HEAD, CONNECT THE STYLUS TO A FIXED PORTION OF THE COMPUTING

SYSTEM WITH A TETHER NO GREATER THAN FIVE INCHES LONG.

DON'T:

1) MOUNT YOUR SCREEN STIFFENER IN FRONT OF A ZONE WHERE AN AIR BAG COULD DEPLOY.

2) USE THE STYLUS HOLDER TO STORE ITEMS WHICH ARE NOT PROPERLY TETHERED TO A FIXED PORTION OF THE COMPUTING SYSTEM.

SOURCE -

FORD MOTOR COMPANY / HAVIS STUDY

DRAWING NUMBER:

DS-DA-405_INST

Sheet 2 of 2

WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,

IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND

DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE

OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY

DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN

ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND

MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE

OPERATING VEHICLE.

PRODUCT DESCRIPTION

SCREEN STIFFENER FOR DS-PAN-210 & 220

SERIES DOCKING STATIONS

DS-DA-405 03-03-11

PRODUCT NAME

INSTALLATION INSTRUCTIONS,

DS-DA-405

1-800-524-9900

WWW.HAVIS.COM

REV. DATE

F-730-019 REV A