ultraCage | blue for C100 ultraCage | blue for C100 Camera

ultraCage | blue for C100 ultraCage | blue for C100 Camera
Title:
Scene:
ultraCage | blue for C100
ultraCage | blue for C100 Camera Installation
Pages:
Date:
1
of
12.12.12
1
Camera Back
Shoe Clamp Front
1
2
Camera Front
1: Position Shoe Clamp in camera shoe mount 2: Remove standard mounting plate from
camera. Replace with Redrock Micro
as shown and tighten screw.
DoubleTap as shown.
Note: Shoe Clamp MUST be placed so the
free 1/4-20” mounting hole is nearest
camera front.
4
3: Carefully put camera into place in ultraCage.
Tighten both camera screws from underneath the
cage into DoubleTap-fitted camera.
3
4: Tighten 1/4-20 x 7/8” screw from top of cage into
camera.
create the cinema experience
http://start.redrockmicro.com
Tutorials, forums, customer support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising