Picture King
INSTRUCTION BOOK FOR
Picture King®
Important Parts Of Your Da-Lite Screen
Setting Up Your Screen
(When ordering parts, please specify screen model and size.)
1. Hold screen vertically with tripod just above floor.
With toe, press straight down on toe release plate.
Tripod legs will glide open.
1
2
3
4
2. Pull out Black Locking Knob at top of bottom tube.
19
5
6
7
8
18
17
9
10
16
3. Raise extension tube to first position, and then swing
case to horizontal position.
4. Raise screen surface and pull bail over hanger.
If Keystone Eliminator is to be used, (1) simply grasp the
knurled tip which protrudes slightly above the hanger; (2) pull
straight up; (3) then lay in a horizontal position over the
hanger, and place the pull bail on it.
5. Release Black Locking Knob and fabric tension lock
lever on handle.
6. Holding extension tube with one hand and releasing
Black Locking Knob with other, raise extension tube to
desired position.
7. The case position may be changed by pulling out the
Black Locking Knob located on the handle.
15
12
11
8. When case at desired position, lock into place by
pressing down on the fabric tension lock lever.
14
Using Screen In Lowest Position
13
Follow steps 1 through 3 above.
1)Slat
12) Leg Bracket
2)Saddle
13) Toe Release &
Leg Lock
b. Release black knob and lower case.
14) Leg Shoes
c. Holding bottom tube, raise extension tube until
it locks into desired position.
3) Pull Bail
4) Hanger Hook
5) Picture Surface
6) Extension Tube
7) Black Locking Knob
8) Bottom Tube
9)Handle
10)Roller
11)Tripod
2
15) Fabric Tension
Lock Lever
16) End Cap
17) Screen Case
18) Black Locking Knob
19) Slat Caps
a. Raise locking lever on left side of handle.
Closing The Screen
1. Return screen case to original central position on center tube.
2. Hold extension tube firmly. Pull out top Black Locking Knob
and lower extension tube to bottom position.
3. Unhook screen pull bail and complete re-rolling fabric
into case.
4. If Keystone Eliminator has been used, simply raise it
to a perpendicular position and push it back into the
extension tube.
5. Swing case to vertical position. Note that fabric locks in.
6. Set tab on hanger in opening of case end cap. As extension
tube locks, the case also is locked.
7. Place tip of middle finger of right hand in depression beneath
leg bracket. Lift leg bracket sharply, at the same time applying
a slight lift to entire unit with left hand. NOTE that legs are
closed and locked, hanger, and extension tube and case are
locked and surface is locked to provide for safe and
comfortable carrying and storing.
Protect Your Screen
Before re-rolling surface into case, examine both front and
back of surface to be sure they are free of foreign matter.
A Da-Lite Screen carrying case is a wise and economical
investment.
IMPORTANT NOTE:
Use no more tilt than necessary. Use caution in tensioning
screen surface when using Keystone Eliminator. Don't
over-tension!
3
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS
Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects in
materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are properly
operated according to Da-Lite's instructions and are not damaged due to improper handling or treatment after shipment from the
factory.
This warranty does not apply to equipment showing evidence of misuse, abuse or accidental damage, or which has been tampered
with or repaired by a person other than authorized Da‑Lite personnel.
Da-Lite’s sole obligation under this warranty shall be to repair or to replace (at Da-Lite’s option) the defective part of the merchandise.
Returns for service should be made to your Da-Lite dealer. If it is necessary for the dealer to return the screen or part to Da-Lite,
transportation expenses to and from Da-Lite are payable by the purchaser and Da-Lite is not responsible for damage in shipment.
To protect yourself against damage or loss in transit, insure the product and prepay all transportation expenses.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WARRANTIES AS TO FITNESS FOR USE AND MERCHANTABILITY. Any implied warranties of fitness for use,
or merchantability, that may be mandated by statute or rule of law are limited to the one (1) year warranty period. This warranty gives
you specific legal rights, and you may also have other rights, which vary from state-to-state. TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, NO LIABILITY IS ASSUMED FOR EXPENSES OR DAMAGES RESULTING FROM INTERRUPTION IN OPERATION
OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE.
In the event that there is a defect in materials or workmanship of a Da-Lite product, you may contact our Sales Partners at PO Box 137,
Warsaw, IN 46581-0137, (574) 267-8101, (800) 622-3737.
IMPORTANT: THIS WARRANTY SHALL NOT BE VALID AND DA-LITE BRANDED PRODUCTS SHALL NOT BE BOUND BY THIS
WARRANTY IF THE PRODUCT IS NOT OPERATED IN ACCORDANCE WITH THE DA-LITE WRITTEN INSTRUCTIONS.
Keep your sales receipt to prove the date of purchase and your original ownership.
A Milestone AV Technologies Brand
3100 North Detroit Street
Warsaw, Indiana 46582
P: 574.267.8101 or 800.622.3737
F: 574.267.7804 or 877.325.4832
E: info@da-lite.com
www.da-lite.com
DL–0253 01.14
© 2013 Milestone AV Technologies LLC. Printed in U.S.A.
46425
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising