SV-552 - Kramer Canada
SV-552
SummitView™ BrainBox™ Processor/Switcher & Room Controller
The
SummitView™
SV−552
processor/switcher is the heart of the
system for audio and video signal
distribution and room control. From one or
more wall plate room controllers, the
SV−552 switches up to six audio and video
sources to a large screen display in their
native formats, amplifies the audio to a pair
of speakers, and controls room facilities
such as lights and a screen.
FEATURES
Video Inputs - 6 RJ−45 from 6 wall plates via CAT 5: 3 computer graphics video, 2 composite & 1 DVI/HDMI.
Video Outputs - 15−pin HD (for computer graphics video), RCA (for composite video) & DVI/HDMI with embedded
audio.
Audio Inputs - Unbalanced stereo audio (from the composite, computer graphics video and embedded audio from
the DVI & HDMI wall plate input modules).
AUX Audio Input - Mixes an additional audio source (line or mic). Phantom power (if required).
Audio Outputs - 1 stereo speakers, 1 monitor, 1 line & 1 embedded audio on the DVI output for HDMI signal only.
De-Embeds HDMI & DVI Audio.
Flexible Control Options - SummitView™ controllers via K−NET™ channel. Also supported: Ethernet, 10V volume
control and front panel switching.
K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable.
Power Connect™ System - The SV−552 provides power to the wall plate input units via the CAT 5 cables.
Control Ports - Control AV equipment with 2 RS−232, 1 RS−485, 1 IR, 2 relays, and Ethernet ports.
Kramer Site-CTRL™ Compatible - For network remote control and management using Kramer Site−CTRL software
over the Ethernet port.
Remote Volume Control - Adjusts volume (line & speaker) from an RC−63 or other compatible controller.
Internal Clock - Schedules recurring tasks, define system shutdown timer for economic operation, and more.
USB Port - For programming.
Mounting Options - RK−551 19" rack adapter or mounts in SV−1 mounting kit above the ceiling mount projector.
SV-552
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUTS
MAX. OUTPUT LEVEL:
BANDWIDTH (-3DB):
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CONTROLS:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2ND HARMONIC:
POWER SOURCE:
INCLUDED ACCESSORIES:
OPTIONS:
1 AUX stereo on a 3−pin terminal block; 1 HDMI, 3 PC (XGA and Y, Pb, Pr), 1
composite video all on RJ−45 connectors.
1 speaker stereo on a 4−pin terminal block; 1 projector (XGA) on a 15−pin HD
computer graphics video connector; 1 composite video on an RCA connector;
10kΩ volume; 2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load), RS−232, and RS−485 3−pin terminal blocks;
IR OUT on 2−pin terminal block; 1 DVI output with embedded audio; 1 line out, 1
monitor out for audio.
Video: CV 2.6Vpp; XGA 2.2Vpp; Audio: 7W per channel into 4Ω; Lineout: 5.8Vpp @max volume, tone controls zeroed.
Video: CV and Y/C: 68MHz, XGA and Y, Pb, Pr 130MHz; Audio: 20Hz to 20kHz.
0.35%.
0.01Deg.
<0.05%.
Video: 58dB; audio: 55dB; lineout: 85dB @1KHz.
IR, RS−232, RS−485, Ethernet, K−NET.
Video: DC; Audio: Input: AC; Output: DC.
1.1% @1KHz, 12.8Vpp; lineout: 0.063% @1KHz, 2.4Vpp.
0.4% @1KHz, 8Vpp; lineout: 0.02% @1KHZ, 2.4Vpp.
12V DC, 5A desktop power adapter.
Power supply, rack "ears".
RK−551 (for installing on a 19” rack as opposed to mounting inside the SV−1).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising